Valutazione discussione:
  • 1 voto(i) - 5 media
  • 1
  • 2
  • 3
  • 4
  • 5
DIR-850L: Router Gigabit Cloud Dual Band AC 1200
#1
D-Link DIR-850L
instradatore senza fili 802.11ac 1200 a doppia banda simultanea
(300 Mbps su 2,4 GHz + 867 Mbps su 5 GHz)
con tecnologia a nuvola


[Immagine: DIR850L1664x936SIDE%20RIGHT.png?w=400]
[Immagine: DIR850L1664x936BACK.png?w=400]
DIR-850L A1 (Realtek RTL8197D)

Panoramica
Il Cloud Router Wireless AC1200 Dual-Band Gigabit ti dà la possibilità di connetterti al tuo network domestico e monitorarlo utilizzando la tecnologia wireless proveniente dal futuro e l'unicità di mydlink. Scaricando l'app gratuita mydlink puoi controllare la tua rete domestica da remoto. In più, con la tecnologia SharePort inclusa, accedere ai tuoi file, playlist e video e condividerli non è mai stato così facile.

Home Networking veloce ed affidabile
Questo router crea network che viaggiano alla massima velocità disponibile oggi, collegando tutti i tuoi computer e device mobili alla tua connessione a banda larga. La tecnologia dual-band 802.11ac porta a casa tua il futuro della connettività wireless ad altissima velocità, permettendoti di vedere in streaming video in HD, effettuare chiamate e navigare da ogni angolo di casa tua senza interruzioni. Le porte ethernet Gigabit garantiscono connessioni cablate veloci per un massimo di 4 PC o altri device. Ha stile, è facile da usare, ed è IPv6-ready per permetterti di avere una rete affidabile oggi e domani.

Greater Speeds with the latest Wireless AC
Il DIR-850L utilizza la più recente tecnologia Wireless AC, che può trasferire dati a velocità fino a 867 Mbps (4 volte più veloce dello standard utilizzato in precedenza). Questo router utilizza contemporaneamente la banda a 2.4 Ghz ed a 5 Ghz grazie alla tecnologia dual-band e alle sei antenne: questo ti permette di navigare, chattare e mandare e-mail con la banda a 2.4 Ghz, mentre con quella a 5 Ghz puoi vedere filmati in streaming, giocare online, effettuare chiamate su internet.

Resta informato e protetto con mydlink
Questo router ti dà il controllo totale permettendoti di monitorare chi si connette al tuo network e quali siti sta visitando, e ti dà la possibilità di bloccare i visitatori indesiderati. Puoi controllare il tuo network da remoto con il portale mydlink, accessibile da browser, o scaricando l'app gratuita mydlink disponibile per iOS ed Android.

Il file-sharing in punta di dita
Collega una periferica di storage alla porta USB del tuo DIR-850L per creare uno spazio di archiviazione condiviso tra tutti i tuoi computer e device mobili. Collega un hard disk USB per vedere in streaming la tua libreria di video e musica sul tuo laptop. L'app per smartphone SharePort Mobile (disponibile per iOS e Android) ti permette di effettuare backup delle foto e dei video presenti sul tuo device. Puoi persino personalizzare il tuo spazio di archiviazione creando account separati per controllare gli accessi, in modo da poter condividere la tua musica con tutti ma mantenere i tuoi documenti privati. Questo Cloud Router può anche essere utilizzato come un media server per la tua casa, per farti vedere in streaming i file archiviati sul tuo dispositivo di storage USB su qualsiasi device DLNA come la Boxee Box di D-Link.

Facile da configurare ed usare
Inizia ad utilizzare il DIR-850L in un attimo dal tuo divano con l'app QRS Mobile (Quick Router Setup Mobile) per iOS e Android. Collega il router alla rete elettrica, lancia l'app e segui pochi semplici passi per configurare la tua rete senza dover toccare un computer. Puoi anche creare un network protetto con il WPS (Wi-Fi Protected Setup): premi semplicemente il pulsante WPS sul router per stabilire una connessione sicura con un nuovo device. Se hai altri prodotti mydlink puoi sfruttare i vantaggi della Zero Configuration: collega un tuo device mydlink-enabled al DIR-850L e sarà automaticamente rilevato. Non sarà necessaria alcuna configurazione aggiuntiva.

Design moderno
Le curve eleganti e il particolare design verticale non ti costringeranno più a nascondere il router. Tutte le porte sono situate sul retro del device, in modo da risultare invisibili. Potrai sfoggiarlo a casa tua con orgoglio, come se fosse un componente d'arredo.

Specifiche
Interfaccia        
• 802.11 a/b/g/n/ac wireless LAN
• Four 10/100/1000 Gigabit LAN ports
• 10/100/1000 Gigabit WAN port
• USB port

Antenne
• 2x2 (2.4 GHz) and 2x2 (5 GHz) internal antennas

Standard  
• IEEE 802.11ac (draft)
• IEEE 802.11n
• IEEE 802.11g
• IEEE 802.11b      
• IEEE 802.11a
• IEEE 802.3
• IEEE 802.3u

Requisiti minimi di sistema  
• Windows 7/Vista/XP SP3 or Mac OS X 10.4 or higher
• Microsoft Internet Explorer 6 or higher, Firefox 1.5 or higher, or other Java-enabled browser
• CD-ROM
• Ethernet network interface
• Cable or xDSL modem
• Subscription with an Internet Service Provider

Caratteristiche avanzate      
• Guest Zone
• SharePort web access
• Multi-language web setup wizard
• Green Ethernet
• DLNA Media server support
• Dual Active Firewall: Network Address Translation (NAT) & Stateful Packet Inspection (SPI)
• VPN passthrough/multi-session PPTP/L2TP/IPSec

Funzionalità mydlink      
• Remote Management
• View current upload/download bandwidth
• View currently connected clients
• View web browsing history per client  
• Block/unblock client network access
• Manage wireless network details
• Accessible through a web browser or iOS or Android mobile app

Supporto app mobile
• mydlink Lite
• SharePort Mobile
• QRS Mobile

Sicurezza wireless
• WPA & WPA2 (Wi-Fi Protected Access)        
• Wi-Fi Protected Setup (WPS) PIN/PBC

Dimensioni (L x W x D)      
• 93 x 116 x 145 mm (3.7 x 4.6 x 5.76 inches)      

Peso
• 330 grams (0.73 lbs)    

Alimentazione        
• Input: 100 to 240 V AC, 50/60 Hz    
• Output: 12 V DC, 2.0 A

Temperature
• Operating: 0 to 40 °C (32 to 104 °F)
• Storage: -20 to 65 °C (-4 to 149 °F)

Umidità    
• Operating: 0% to 90% non-condensing      
• Storage: 5% to 95% non-condensing

Certificationi      
• FCC Class B
• CE Class B
• C-Tick
• DLNA
• IPv6 Ready  Wi-Fi Certified
• Wi-Fi Protected Setup (WPS)
• Wi-Fi Multimedia (WMM)
• Compatible with Windows 8

[Immagine: AC1200_speed.png?w=400]

Documentazione
Scheda tecnica
Guida installazione: Italiano, Multilingua
Manuale utente
Domande frequenti: Italiano, Inglese

Visuale esterna del prodotto in 3D a 360°
[Immagine: 360_degree.png]

Software
mydlink
D-Link Apps
SharePort Mobile App
SharePort Software Utility

Firmware (Mai aggiornare via wireless ma sempre via cavo!!!)
Rev. H/W: A1
DIR-850L A1 1.13 build 01_f4if 20150418 con nota edizione
DIR-850L A1 1.12 build 05_f1fh 20150115 con nota edizione cumulativa
DIR-850L A1 1.11 build 03 20140709
DIR-850L A1 1.10 build 08 20131206 | Nota edizione cumulativa
DIR-850L A1 1.09 build 04 20130827 con nota edizione

- Pacchetto lingua IT 1.04 | Collegamento alternativo

Supporto internazionale D-Link
Pagina prodotto: Italia, USA
Sito FTP: Europa, Germania, BcnLab, Temp, USA, Canada, Singapore
Supporto Tecnico: Taiwan TSD, IT mydlink
La prima cosa da leggere in questo forum | Siti globali D-Link

Siate CHIARI SINTETICI E DETTAGLIATI altrimenti non possiamo aiutarvi!!!

N.B. Purtroppo non ho il tempo di rispondere in PVT: 1) usa un motore di ricerca; 2) usa la funzione "Cerca" del forum; 3) chiedi nel forum. GRZ!!!
Questo forum non è un centro assistenza, ma una comunità.
Prima di chiedere a NOI di risolvere il problema che hai TU, chiediti come TU puoi dare una mano a TUTTI.

Cita messaggio
#2
Documentazione multimediale

Fonti immagini:
WikiDevi
FCC

Video:
Cerca con Google
La prima cosa da leggere in questo forum | Siti globali D-Link

Siate CHIARI SINTETICI E DETTAGLIATI altrimenti non possiamo aiutarvi!!!

N.B. Purtroppo non ho il tempo di rispondere in PVT: 1) usa un motore di ricerca; 2) usa la funzione "Cerca" del forum; 3) chiedi nel forum. GRZ!!!
Questo forum non è un centro assistenza, ma una comunità.
Prima di chiedere a NOI di risolvere il problema che hai TU, chiediti come TU puoi dare una mano a TUTTI.

Cita messaggio
#3
Pubblicato in testa alla discussione firmware DIR-850L A1 1.09 build 04 20130827.

Codice:
DIR-850L Firmware Release Note

Firmware: v1.09
Hardware: A1
Date: 2013/08/08

Problems Resolved:
1. Improve compatible with 5G Wi-Fi scanning and connection
2. Block traffic between WAN and LAN ports during booting.
3. Fix UPnP security issue
4. Display channel list on hidden page
5. Improve wireless IOT issue
6. Enhance direct access stable by mydlink shareport APP

Enhancements:
1. Support "one page setting" for CN domain.

Known Issues:
None
La prima cosa da leggere in questo forum | Siti globali D-Link

Siate CHIARI SINTETICI E DETTAGLIATI altrimenti non possiamo aiutarvi!!!

N.B. Purtroppo non ho il tempo di rispondere in PVT: 1) usa un motore di ricerca; 2) usa la funzione "Cerca" del forum; 3) chiedi nel forum. GRZ!!!
Questo forum non è un centro assistenza, ma una comunità.
Prima di chiedere a NOI di risolvere il problema che hai TU, chiediti come TU puoi dare una mano a TUTTI.

Cita messaggio
#4
Dove posso trovare il file per la lingua italiano
per il router in oggetto??

Grazie
Giacomo
Cita messaggio
#5
Nel 1° messaggio di questa discussione trovi tutto il materiale sul DIR-850L pubblicato nel mondo e che può servire qui da noi.
Purtroppo, stranamente, a differenza del DIR-860L, si trovano solo i file per la lingua tedesca DE, portoghese BR e cinese CN, ma non per la lingua italiana. Undecided

Conviene chiedere al supporto italiano. Continua a farci sapere se hai novità! Big Grin

(12-01-2009, 12:51)Pondera Ha scritto: D-Link Italia

Nuovo sito: Supporto tecnico telefonico | Portale Self-Service D-Link (per nuovi clienti)

Portale Self-Service D-Link (per clienti registrati)
La prima cosa da leggere in questo forum | Siti globali D-Link

Siate CHIARI SINTETICI E DETTAGLIATI altrimenti non possiamo aiutarvi!!!

N.B. Purtroppo non ho il tempo di rispondere in PVT: 1) usa un motore di ricerca; 2) usa la funzione "Cerca" del forum; 3) chiedi nel forum. GRZ!!!
Questo forum non è un centro assistenza, ma una comunità.
Prima di chiedere a NOI di risolvere il problema che hai TU, chiediti come TU puoi dare una mano a TUTTI.

Cita messaggio
#6
Pubblicato nel 1° messaggio di questa discussione firmware DIR-850L A1 1.10 build 08 20131206.

Codice:
=================================================
DIR-850L Revision A Release Notes
=================================================
Firmware 1.10B08
Date: 1/2/2014
Release Notes:
Problem Resolved & Enhancements:
- Fix the issue with DS-Lite
- Fix the security issue with Samba
- Fix the issue with the mail server
- Fix the issue with DLNA
- Support the latest hidden page
- Support PPPoE Passthrough
=================================================
DIR-850L Revision A Release Notes
=================================================
Firmware 1.06
Date: 06/27/2013
Release Notes:
Improved compatibility issues with Samsung Galaxy S4
=================================================
DIR-850 Revision A Release Notes
=================================================
Firmware 1.05
Date: 04/16/2013
Release Notes:
Fixed the issue of private IP packet found from WAN
Fixed IPv6 behavior
Fixed security issue
=================================================
DIR-850 Revision A Release Notes
=================================================
Firmware 1.03
Date: 03/18/2013
Initial Shipping firmware
=================================================
La prima cosa da leggere in questo forum | Siti globali D-Link

Siate CHIARI SINTETICI E DETTAGLIATI altrimenti non possiamo aiutarvi!!!

N.B. Purtroppo non ho il tempo di rispondere in PVT: 1) usa un motore di ricerca; 2) usa la funzione "Cerca" del forum; 3) chiedi nel forum. GRZ!!!
Questo forum non è un centro assistenza, ma una comunità.
Prima di chiedere a NOI di risolvere il problema che hai TU, chiediti come TU puoi dare una mano a TUTTI.

Cita messaggio
#7
In caso di problemi col wireless:

(16-01-2014, 10:26)Pondera Ha scritto:
D-Link Stati Uniti Ha scritto:Please try to uncheck auto channel scan and set a static channel. Please test channel 1, 6, 9 and 11.
La prima cosa da leggere in questo forum | Siti globali D-Link

Siate CHIARI SINTETICI E DETTAGLIATI altrimenti non possiamo aiutarvi!!!

N.B. Purtroppo non ho il tempo di rispondere in PVT: 1) usa un motore di ricerca; 2) usa la funzione "Cerca" del forum; 3) chiedi nel forum. GRZ!!!
Questo forum non è un centro assistenza, ma una comunità.
Prima di chiedere a NOI di risolvere il problema che hai TU, chiediti come TU puoi dare una mano a TUTTI.

Cita messaggio
#8
Oppure, meglio, disabilitare in Advanced Wireless l'opzione HT 20/40 Coexistence.
La prima cosa da leggere in questo forum | Siti globali D-Link

Siate CHIARI SINTETICI E DETTAGLIATI altrimenti non possiamo aiutarvi!!!

N.B. Purtroppo non ho il tempo di rispondere in PVT: 1) usa un motore di ricerca; 2) usa la funzione "Cerca" del forum; 3) chiedi nel forum. GRZ!!!
Questo forum non è un centro assistenza, ma una comunità.
Prima di chiedere a NOI di risolvere il problema che hai TU, chiediti come TU puoi dare una mano a TUTTI.

Cita messaggio
#9
Buongiorno, vorrei sapere se è possibile collegare un DIR850L ad un DSL3580L per estendere la rete wifi, per intenderci, usarlo come una sorta di repeater...
Cita messaggio
#10
Se intendi senza mezzi fisici di collegamento tra i due apparati no, devi portare un cavo ethernet dal dsl alla porta Wan del DIR.
La famiglia DIR-xxx sono tutti Access Point nudi e crudi.

Per un vero Repeater cioè agganciare un segnale Wi-Fi ed estenderlo per arrivare ancora più lontano devi andare sui DAP-xxx una volta chiamati 6 in 1.
Cita messaggio
#11
Ciao a tutti! Mi presento, mi chiamo Roberto e vorrei chiedervi cortesemente un aiuto o un consiglio riguardo al DIR-850L.

Vorrei aggiungere una guest zone wireless alla mia lan.
Prima avevo un DSL-2750B, che gestiva la guest zone in maniera egregia. Ora sono passato ad un provider che mi offre connettività attraverso un cavo di rete che va ad un'antenna wifi esterna, quindi il 2750B è in un cassetto.

Ho acquistato quindi l'access point in oggetto, che ha la funzione di guest zone, ma non riesco a farla funzionare in modo analogo al 2750B.

Il problema più importante è che ai client connessi alla guest zone viene assegnato un ip nella stessa subnet della lan (192.168.0.x/24), in più si possono pingare uno con l'altro e con le altre macchine della lan... In pratica, questa rete, della guest non ha nulla... Dodgy

Il 2750B per esempio, pur avendo una lan 192.168.0.x, assegnava agli 'ospiti' un ip nella subnet 192.168.250.x e su quella rete si presentava come gw con 192.168.250.1; questo, insieme all'AP isolation, dava buona sicurezza che ciascun ospite potesse solamente uscire verso internet senza vedere gli altri o le macchine nella lan.

Probabilmente mi sta sfuggendo qualche dettaglio nella configurazione... Ovviamente il dhcp del router è attivo, ma sembra assegnare esclusivamente il range della lan anche sulle interfaccie wireless. Ho inoltre abilitato il "WLAN Partition", anche se non è ben spiegato quale funzione svolga. Per il resto ho settato una configurazione normale: WPA2, AES, ecc.

Ringrazio in anticipo chi vorrà darmi qualche suggerimento o informazione su come ottenere una guest zone degna di questo nome! ShyShy
Cita messaggio
#12
Premesso che, se non erro, anche il 2750B poteva essere utilizzato come router con porta WAN rinunciando ad una delle porte ethernet posteriori, il DIR-850L dispone di una doppia radio 2.4Ghz e 5Ghz wifi n & ac 1200 con possibilità di doppia rete guest per entrambe le frequenze. Trovi le opzioni di attivazione di queste ultime nel menù Advanced\Guest Zone dove puoi attivare le Guest Zone e mettere la crittografia. Se vuoi che i client connessi dialoghino tra loro e con la rete principale e non solo all'interno della loro Guest Zone devi spuntare la voce Enable Routing Between zones.

PS: che firmware hai? Aggiorna all'ultimo disponibile e poi resetta dall'interfaccia web, che non fosse un problema di qualche bug del firmware di scatola.
Disattiva l'opzione WLAN Partition che in Italia non è supportata, nè richiesta.
Cita messaggio
#13
Pubblicato firmware DIR-850L A1 1.11 build 03 20140709.
La prima cosa da leggere in questo forum | Siti globali D-Link

Siate CHIARI SINTETICI E DETTAGLIATI altrimenti non possiamo aiutarvi!!!

N.B. Purtroppo non ho il tempo di rispondere in PVT: 1) usa un motore di ricerca; 2) usa la funzione "Cerca" del forum; 3) chiedi nel forum. GRZ!!!
Questo forum non è un centro assistenza, ma una comunità.
Prima di chiedere a NOI di risolvere il problema che hai TU, chiediti come TU puoi dare una mano a TUTTI.

Cita messaggio
#14
Pubblicato firmware DIR-850L A1 1.12 build 05_f1fh 20150115.

Codice:
D-Link DIR-850L (WRG-AC05, Wireless Router) F/W Release Notes.
(Realtek 11ac+11n 5G+2.4G concurrent 2x2 8197D+8812AR+8192CE+8367RB)
----------------------------------------------------------------------------

Firmware: v1.12b05_f1fh
Hardware: A1
Date: 2015/01/15

Problems Resolved:
1. Fix SharePort WebAccess HTTP access when using mydlink function

Enhancements:
none

----------------------------------------------------------------------------

Firmware: v1.12b05
Hardware: A1
Date: 2014/10/06

Problems Resolved:
1. Fix gmx mail server issue.
2. Fix WAN/LAN IP conflict issue.
3. Fix HW NAT throughput issue

Enhancements:
none

Notes:
1. Update CN channel table
2. Support No-IP DDNS server

----------------------------------------------------------------------------
build: e79i; v1.11 WW b03;  
Note:
It's beta firmware for verifying web error of stations list.
Update ARP monitor based on v1.11 WW b03.
It's to correct stations list on web page.
----------------------------------------------------------------------------
build: e9oh; v1.11 SG b01;   2014/09/24
svn://172.19.176.57/elbox/branches/dir850lMALAYSIA:49697
Note:
1. Support AP and Repeater mode.
2. Refine routing tale to fit Realtek HW NAT.
3. Fix TCP mss size clamp issue.
----------------------------------------------------------------------------
build: e9ja: v1.12 WW b04;   2014/09/19
svn://172.19.176.57/elbox/branches/dir850lv100/:49696
Note:
Bug fix:
1. [BTD2014081682] [Wireless+Schedule] Wireless function fail when schedule is applied.
2. [BTD2014090033] [NAT] Sometimes NAT fail when DUT disconnect/reconnect(release/renew IP).
3. [BTD2014090332] [IP conflict] Sometimes DUT will keep rebooting when WAN get IP 192.168.0.0/16.
----------------------------------------------------------------------------
build: e92c; v1.12 WW b03;   2014/09/02
svn://172.19.176.57/elbox/branches/dir850lv100/:49331
Note:
1. Fix TCP mss clamping issue.
----------------------------------------------------------------------------
build: e91h; v1.12 WW b02;   2014/09/01
svn://172.19.176.57/elbox/branches/dir850lv100/:49326
Note:
1. Refine DDNS WEB page behavior.
2. Fix HW NAT throughput issue.
----------------------------------------------------------------------------
build: e8qa; v1.12 WW b01;   2014/08/26
svn://172.19.176.57/elbox/branches/dir850lv100/:49225
Note:
1. Fix LAN computers list display issue.
2. IP conflict  (auto NAT)
3. DDNS ¡V no IP DDNS server support
4. My-dlink ¡V replace register page
5. My-dlink ¡V update my-dlink agent
6. Make sure to remove 802.11d info from beacon.
7. Enable token featrue for WFA.
8. CE adaptivity patch.
----------------------------------------------------------------------------
build: e7hi; v1.13 KR b01;   2014/07/17
Note:
1. Support web redirect function.
2. Update KR language package again.
----------------------------------------------------------------------------
build: e6re; v1.12 KR b01;   2014/06/27
Note:
1. Default time zone is Seoul.
2. Mydlink shareport APP fail issue.
3. Update KR language pack.
----------------------------------------------------------------------------
build: e6oa; v1.11 WW b03;   2014/06/24
svn://172.19.176.57/elbox/branches/dir850lv100:47578
Note:
Bug fix:
1. [BTD2014060444] [samba security] When set with "Require router's admin password",
  Linux can access it without username and password.
2. [BTD2014060483] [Wizard+mydlink] wizard mydlink registration will be skipped.
----------------------------------------------------------------------------
build: e6ge; v1.11 WW b02;   2014/06/16
svn://172.19.176.57/elbox/branches/dir850lv100:47424
Note:
1. Correct version number.
----------------------------------------------------------------------------
build: e6ch; v1.11 WW b01;   2014/06/12
svn://172.19.176.57/elbox/branches/dir850lv100: 46126
Note:
1. Add samba authentication.
2. Fix gmx mail server issue.
3. Fix WAN/LAN IP conflict issue.
4. Update CN channel table.
5. Fix After running QRS mobile,5G wireless will be set on 20/40 auto.
----------------------------------------------------------------------------
build: e4sg; v1.11 KR b01;   2014/04/28
svn://172.19.176.57/elbox/branches/dir850lv100: 46126
1. Enable token featrue for WFA.
2. Fix GMX mail server issue.
3. Add the vpn service for PPTP server function.
4. Patch from DIR-880 branch:
  Bug fix: httpd cannot bind br0 port 80 address in bridge mode.
  Bug fix: httpd cannot bind ipv6 link-local address.
  fix client through ipsec can't access device http/dns service
----------------------------------------------------------------------------
build: e18h; v1.10 SN b04;   2013/01/08
svn://6.2.3.100/elbox/branches/dir850lv100: 44012
Note:
1. Modify defaultvalue.php for SN, because the SN version will include CN, so seperate CN to original CN and SN's CN.
----------------------------------------------------------------------------
build: dcrb; v1.10 SN b03;   2013/12/27
svn://6.2.3.100/elbox/branches/dir850lv100: 43727
Note:
1. Modify default setting(include lan ip=192.168.197.241)
2. Because security issue,after firefox v23 can't use add bookmark.
3. Fix schedule is on,will cause /var/topology.conf device name not correct
----------------------------------------------------------------------------
build: dcda; v1.10 KR b01;   2013/12/13
svn://6.2.3.100/elbox/branches/dir850lKR: 43388
Note:
1. Shareport plus will send a control message to ask 64k bytes transfer size, but new kernel just accepts
  16k bytes. We remove this kernel checking code for Shareport plus. The silex driver has higher priority
  than kernel builtin driver after modifing some scripts.
2. When schedule is on,will cause /var/topology.conf device name not correct,
  Normal: wlan0 --> wlan1 --> wlan0-va0 --> wlan1-va0
  Schison: wlan0-va0 --> wlan0 --> wlan1-va0 --> wlan1
  and it will cause hostapd return error, so add rearrange the device to Normal
3. Reopen kill hostapd at first of wificonfig,because set_mib need to turn off hostapd
4. Sync wireless driver with dap-1650.
5. Repeater interface up until its ap interface ready.
6. Fix IE7 can't display bsc_wlan page.
7. For a Apple IPTV bug,We don't add log dns query if the client dns server is not router.
8. Modify st_device will get no xml node while time out
9. Correct wireless mode in mfc wlan command
10.When Band 4 is available in our "WiFI Frequency table",choose Channel in band 4 but not CH165 as default.
11.Remove debug message from mDNS.
12.Fix mDNS extra name conflict issue, patch from DAP1650
13.To sync the tcp packets leakage on WAN when CONFIG_RTL_USB_IP_HOST_SPEEDUP is enabled from DIR-816L.
14.Change the assignment of specified variable to another place.
15.Fix mDNS extra name conflict ssue, patch from DAP1650
16.To sync hidden page codes from the worldwide dir850l.
----------------------------------------------------------------------------
build: dc9h; v1.10 SG b01; Builder  2013/12/09
Note:
1. Fix the issue of TCP socket leakage.
2. When Band 4 is available in our "WiFI Frequency table", choose Channel
  in band 4 but not CH165 as default.
3. Web page of "Device Info" will display "InitError()" when the page time out.
4. Fix Apple IPTV issue: DNS query won't be logged if the client dns server
  is not router.
5. Update 2.4G band TX power.
----------------------------------------------------------------------------
build: dc9e; v1.10 SN b02;   2013/12/09
svn://6.2.3.100/elbox/branches/dir850lv100: 43286
Note:
    1. Add DIR850SN wake up S4(wireless device) patch
    2. Change default value(A. DTIM is 1 ,B. RTS is 2347, C. Beacon int is 102.)
    (The following changes are base on DIR850 v1.10 WW b08)
    3.    Apple TV issue from China.
    4.    mydlink shareport relay issue.
    5.    Open RTSP option at firewall setting.
    6.    Shareport plus control message size issue.
    7.    Modify web page,add some string to i18n.
----------------------------------------------------------------------------
build: dc6j v1.10 WW b08;   2013/12/06
svn://6.2.3.100/elbox/branches/dir850lv100: 43264
Note:
    1.    Modify web page,add some string to i18n.
----------------------------------------------------------------------------
build: dc69 v1.10 WW b07;   2013/12/06
svn://6.2.3.100/elbox/branches/dir850lv100: 43236
Note:
    1.    Open RTSP option at firewall setting.
    2.    Shareport plus control message size issue.
----------------------------------------------------------------------------
build: dc2i v1.10 WW b06;   2013/12/02
svn://6.2.3.100/elbox/branches/dir850lv100: 43097(base on 42884)
Note:
    1.    Apple TV issue from China.
    2.    mydlink shareport relay issue.
----------------------------------------------------------------------------
build: dbjj v1.10 WW b05;   2013/11/19
svn://6.2.3.100/elbox/branches/dir850lv100: 42644
Note:
    1. Correct PT language in setup Wizard.
----------------------------------------------------------------------------
build: dbjg; v1.10 SN b01;   2013/11/19
svn://6.2.3.100/elbox/branches/dir850lv100: 42631
Note:
    1. Add RTS threshold in "Advanced Wireless" page.
    2. WMM can be turned on or off arbitrarily.
----------------------------------------------------------------------------
build: db7h; v1.10 WW b04;   2013/11/07
svn://1.2.3.100/elbox/branches/dir850lv100: 42387
Bug fix:
    1. Correct TW 5G channel list.
    2. Revise LA channels based on freq table 20131106.

----------------------------------------------------------------------------
build: daif; v1.10 WW b03;   2013/11/05
svn://1.2.3.100/elbox/branches/dir850lv100: 42300
Bug fix:
    1.     [10][TW] Channel Width did not show correct value on 60~161 when set
        to HT20 or HT20/40.
    2.    Correct the error of InitGeneral() in device info page.
----------------------------------------------------------------------------
build: daif; v1.10 WW b02;   2013/10/31
svn://1.2.3.100/elbox/branches/dir850lv100: 42224
Bug fix:
    [1] [TW Country+CH52 issue] CH56,60,64 still can run data by HT80 rate.
    [2] [TW] Web UI did not prevent user to select invalid band width on channel 56, 60, 64.
    [8] [DIR-850L]802.11G devices will not connect when in Mixed mode 802.11n and 802.11g is set.

----------------------------------------------------------------------------
build: daif; v1.10 WW b01;   2013/10/18
svn://1.2.3.100/elbox/branches/dir850lv100: 41720
Change Notes:
    1. Fix DS-Lite issue
    2. Fix Samba security issue
    3. Add ¡§Easy setup¡¨ item on CN domain
    4. Support latest hidden page (D-Link_AP_and_Router_HiddenPage_Guidelines_v1.06)
    5. Support PPPoE passthrough
    6. Fix mailserver issue about DEU¡¦s concern.
    7. Follow new WiFI Frequency table_20131008 (removing Band 1 from CN.)
    8. Fix TW band 2 channel ( Close Ch52, Default choose band4 automatically )
    9. DLNA server fail.
        -DLNA daemon sometimes die.
        -Unplug & replug USB device, then DLNA server can't work in ntfs format.
Bug fix:
    1. Update PT language package for Web-based wizard. (Refer to DIR-868L.)
    2. Remove unnecessary debug message from WFA and mDNS.
    3. To sync the tcp packets leakage on WAN when CONFIG_RTL_USB_IP_HOST_SPEEDUP is enabled.
    4. Fix mDNS extra name conflict issue. (Refer to DAP-1650.)
    5. When IPv6 shares with ppp4 is enabled and IPv6 of ppp server not found, IPv4 must
        be able to surf internet.
    6. After running BT for about 30 mins, enable anti-spoofing and DUT kernel panic.
    7. Fix mydlink wish port issue:
    [Internet]--------[DIR-865L Facebook FW]---------[DIR-850L Latest mydlink SharePort Beta FW]
 I already assigned TCP port 2195 for my DIR-865L Remote WebUI management interface, but
 when I test the troubleshooting tool, I can still see a direct connection from App to
 DIR-850L through TCP port 2195.

----------------------------------------------------------------------------
build: d9ie; v1.09 SG b01;   2013/10/08
svn://6.2.3.100/elbox/branches/dir850lMALAYSIA: 41289
Note:
    1. Fix the issue that iTunes and minidlna can't scan hide system file.
    2. Sometimes data frame can't be sent when max 128 station is supported.
      (5G connection issue feedback from mydlink test team.)
    3. Make DS-Lite work.
    4. Support domain code NA and EU (driver layer).
    5. Block traffic between WAN and LAN ports during booting.
    6. WLAN web page supports domain NA.
    7. Fix system crash issue when BT downloading with USB disk inserted.
    8. Fix the issue that uploaded file can save in root only.
    9. Fix the issue of shell UPnP injection.
    10. Remove "802.11b only" from 802.11 mode.
    11. Display channel list on hidden page and iwlist channel command.
    12. Correct coexistence value of 5G band. It's to avoid DWA-182 IOT.
    13. Fix the PPPoE on-demain issue caused by NTP sync.
    14. Stop USB server before upgrading firmware. It's to avoid failure of
     upgrading firmware.
    15. Correct LLD2D icon.
    16. Add authentication mechenism for SAMBA.
    17. Remove dyndns query from mydlink shareport.
    18. Add portforward and virtual server port conflict check for WFA
     GetDirectServe API.
    19. Fix docx file support for shareport APP.
    20. Support "one page setting" for CN domain.
    21. Fix uploading issue in web file access.
    22. Support VLAN for DHCP client.
    23. Fix mDNS extra name conflict issue.
----------------------------------------------------------------------------
build: d9ie; v1.09 KR b03;   2013/09/26
svn://6.2.3.100/elbox/branches/dir850lKR: 40971
Note:
    1. Turn off HT20/40 coexistence in default.
----------------------------------------------------------------------------
build: d9ie; v1.09 KR b02;   2013/09/18
svn://6.2.3.100/elbox/branches/dir850lKR: 40856
Note:
    1. Add RTSP support.
----------------------------------------------------------------------------
build: d9hf; v1.09 KR b01;   2013/09/17
svn://6.2.3.100/elbox/branches/dir850lKR: 40830
Note:
1. Sync v1.09 WW b04
    1. Fix the issue that iTunes and minidlna can't scan hide system file.
    2. Sometimes data frame can't be sent when max 128 station is supported.
      (5G connection issue feedback from mydlink test team.)
    3. Make DS-Lite work.
    4. Support domain code NA and EU (driver layer).
    5. Block traffic between WAN and LAN ports during booting.
    6. WLAN web page supports domain NA.
    7. Fix system crash issue when BT downloading with USB disk inserted.
    8. Fix the issue that uploaded file can save in root only.
    9. Fix the issue of shell UPnP injection.
    10. Remove "802.11b only" from 802.11 mode.
    11. Display channel list on hidden page and iwlist channel command.
    12. Correct coexistence value of 5G band. It's to avoid DWA-182 IOT.
    13. Fix the PPPoE on-demain issue caused by NTP sync.
    14. Stop USB server before upgrading firmware. It's to avoid failure of
     upgrading firmware.
    15. Correct LLD2D icon.
    16. Add authentication mechenism for SAMBA.
    17. Remove dyndns query from mydlink shareport.
    18. Add portforward and virtual server port conflict check for WFA
     GetDirectServe API.
    19. Fix docx file support for shareport APP.
    20. Support "one page setting" for CN domain.
    21. Fix uploading issue in web file access.
----------------------------------------------------------------------------
build: d8sj; v1.09 SN b01;   2013/08/29
svn://1.2.3.100/elbox/branches/dir850lv100: 40197
Note:
1. Special firmware for Samsung.
2. Based on v1.09 WW b03.
3. Close the issue of log email to hinet and gmx.de mail server.
4. Support PPPoE pass through for LAN.
5. Add web page left menu of EASY SETUP for return easy setup.
6. Support WFA GetDirectServer client=0.0.0.0.
7. Shell scripe escape for SAMBA passwd.
8. WIFI service will not start when mfc mode is on.
  Wireless only started by mfc wlan command.
  (For menufacture only.)

----------------------------------------------------------------------------
build: d8ri; v1.09 WW b04;   2013/08/27
svn://1.2.3.100/elbox/branches/dir850lv109: 40159
Note:
1. Based on v1.09 b03
2. Correct SSID rule so that is can support old boards.
SSID rules:
    Before v1.08:
 All region
  dlink-5GHz-STUV (STUV: 5G WLAN MAC last 4 digital)
  dlink-WXYZ (WXYZ: 2G WLAN MAC last 4 digital)

After v1.09:
 CN:
  D-Link_DIR-850L_5GHz
  D-Link_DIR-850L

 CN mfc commands:
  devdata set -e wifissid_5g=D-Link_DIR-850L_5GHz
  devdata set -e wifissid_2g=D-Link_DIR-850L

 Others:
  dlink-WXYZ-5GHz (WXYZ: LAN MAC last 4 digital)
  dlink-WXYZ (WXYZ: LAN MAC last 4 digital)

 Other region mfc commands:
  devdata set -e wifissid_5g=dlink-WXYZ-5GHz
  devdata set -e wifissid_2g=dlink-WXYZ

----------------------------------------------------------------------------
build: d8ch; v1.09 WW b03;   2013/08/12
svn://1.2.3.100/elbox/branches/dir850lv100: 39633
Note:
1. Fix WLAN fail issue caused by CN SSID and security rules.
2. Correct port assignment issue for mydlink shareport mobile.
3. Sometime CN one page can't be saved.
4. Fix uploading issue in web file access.

----------------------------------------------------------------------------
build: d88c; v1.09 WW b02;   2013/08/08
svn://1.2.3.100/elbox/branches/dir850lv100: 39548
Note:
1. Correct "one page setting" for CN domain.

Release note correct for b1.09 WW b01:
7. Fix system crash issue when BT downloading with USB disk inserted.

----------------------------------------------------------------------------
build: d87i; v1.09 WW b01;   2013/08/07
svn://1.2.3.100/elbox/branches/dir850lv100: 39537
Notes:
1. Fix the issue that iTunes and minidlna can't scan hide system file.
2. Sometimes data frame can't be sent when max 128 station is supported.
  (5G connection issue feedback from mydlink test team.)
3. Make DS-Lite work.
4. Support domain code NA and EU (driver layer).
5. Block traffic between WAN and LAN ports during booting.
6. WLAN web page supports domain NA.
7. Fix system crash issue when BT downloading with USB disk inserted.
8. Fix the issue that uploaded file can save in root only.
9. Fix the issue of shell UPnP injection.
10. Remove "802.11b only" from 802.11 mode.
11. Display channel list on hidden page and iwlist channel command.
12. Correct coexistence value of 5G band. It's to avoid DWA-182 IOT.
13. Fix the PPPoE on-demain issue caused by NTP sync.
14. Stop USB server before upgrading firmware. It's to avoid failure of
   upgrading firmware.
15. Correct LLD2D icon.
16. Add authentication mechenism for SAMBA.
17. Remove dyndns query from mydlink shareport.
18. Add portforward and virtual server port conflict check for WFA
   GetDirectServe API.
19. Fix docx file support for shareport APP.
20. Support "one page setting" for CN domain.
----------------------------------------------------------------------------
build: d82f; v1.07 SG b04;   2013/08/02
svn://1.2.3.100/elbox/branches/dir850lMALAYSIA: 39379
Notes:
1. Fix DS-Lite issue.
2. Traffice between WAN and LANs will be blocked during booting.
3. Fix panic issue when downloading BT with USB disk inserted.
4. Fix security issue of upnp shell injection.
5. Remove "802.11b only" from WLAN setup page.
6. Display channel list from driver in hidden page.
7. Avoid DWA-182 A1 IOT issue.
8. Change behavior of "Disable NAT".

----------------------------------------------------------------------------
build: d7ml; v1.08 b01;   2013/07/22
svn://1.2.3.100/elbox/branches/dir850lv107: 38937
Note:
    1. Fix EU channel issue based on v1.07 b01

----------------------------------------------------------------------------
build: d7ch; v1.07 KR b01;   2013/07/12
svn://1.2.3.100/elbox/branches/dir850lKR: 38653
Note:
    1. Bug fix: Throughput will go down when WAN mode and WAN setting change.
    2. Bug fix: private ip leakage when WAN mode is setting to PPPOE always.
    3. Refine memory usage of DLNA.
    4. Refine ethernet IRQ so that LAN PC can access device web page even device meets DOS.
    5. Bug fix: It's hard to access internet when PPtP is selected.
    6. Apply S4 patch.
    7. Turn on 2.4G coexitence in default setting.
    8. WPS will be turned off after mydlink set WEP and WPA.
    9. Change the tag name to config.wirelesswarn for mydlink.
    10. Add stop service PHYINF.WIFI while rebooting.
    11. Sync mydlink shareport with WW.
    12. Fix some bugs as below:
        (1) [Vulnerabilities] Cross-Site Request Forgery.
        (2) [Vulnerabilities] Broken Authentication and Session Management.
        (3) [Message] One string of WPS message need fix.
        (4) [Browser+UI] The Close button of file explorer can't work on IE8.
    13. Bug fix: It's hard to connect to 5G band.
    14. Correct firmware query site.

----------------------------------------------------------------------------
build: d7bk; v1.07 SG b02;   2013/07/12
svn://1.2.3.100/elbox/branches/dir850lMALAYSIA/Makefile: 38596
Note:
    1. Correct VLAN for Unify-PPPoE.
    2. Fix the issue of "5G band connection fail".

----------------------------------------------------------------------------
build: d79i; v1.07 SG b01;   2013/07/09
svn://1.2.3.100/elbox/branches/dir850lMALAYSIA/Makefile: 38424
Note:
    1. Sync to v1.07 WW mydlink shareport function.
    2. Add Unifi-PPPoE for Malaysia retail.
    3. Revise web page banner.
    4. Revise FW query site.
----------------------------------------------------------------------------
build: d6kh; v1.07 b01;   2013/06/21
svn://1.2.3.100/elbox/branches/dir850lv100: 38011
Note:
    1. Support mydlink shareport
    2. Support WebFileAccess V2.00
    3. 2.4G coexistence is enabled in default.
    4. Refine reboot script
    5. Update mydlink agent to version 2.0.17-b17
    6. Correct response parameter from "http_port" to "port".

----------------------------------------------------------------------------
build: d6da v1.06 b05;   2013/06/13
svn://1.2.3.100/elbox/branches/dir850lv100: 37750
Note:
    1. Modify the CGI tag to "config.wirelesswarn" in get.
----------------------------------------------------------------------------
build: d66i v1.06 b04;   2013/06/06
svn://1.2.3.100/elbox/branches/dir850lv100: 37595
Note:
    1. Disable default coexistence. (To avoid IOT issue with Intel.)
----------------------------------------------------------------------------
build: d63c v1.06 b03;   2013/06/03
svn://1.2.3.100/elbox/branches/dir850lv100: 37404
Note:
    1. Improve PS IOT with Samsung S4.
    2. Default coexistence should be enabled.

----------------------------------------------------------------------------
build: d5tj v1.06 b02;   2013/05/30
svn://1.2.3.100/elbox/branches/dir850lv100: 37262
Note:
    1. Remove RTSP module for China iTV issue.
    2. Correct power limitation.
    3. Fix throuphput drop down issue when WAN setting runtime chanes.
    4. Avoid OOM when DLNA scans USB disk.
    5. Fix packets leakage issue when WAN type is PPPoE alway-on.
    6. Fine tune software IRQ so that user space application still responses
       when DOS attack.
    7. Fix an issue of PPtP can't go internet easily.

----------------------------------------------------------------------------
build: d5ga v1.06 KR b01;   2013/05/16
svn://1.2.3.100/elbox/branches/dir850lKR: 36757
Note:
    1. Fix the issue of web page wireless 2.4g can't show enable.
    2. Modify web page add reboot while modified IPTV port number.
    3. Fix WAN disconnect issue when WAN is DHCPc and SDMZ is turned on.
    4. Fix one issue that network statistics is displayed slowly.
    5. Default time zone is Seoul.

----------------------------------------------------------------------------
build: d5fc v1.06 b01;   2013/05/15
svn://1.2.3.100/elbox/branches/dir850lv100: 36716
Note:
    1. Correct one iptables rule so that DHCP WAN can accept broadcast ACK
       during renew.
    2. Correct bandwidth display for 5G band.
    3. Fix one issue that NAT throughput will drop down when WAN mode changes.
    4. Support 128 statoins
    5. Fix one issue that M1 can't be sent in four-way handshake.
    6. Correct mydlink tag name from wirelesswarn to log_wirelesswarn.
    7. Fixed the issue that itunes and minidlna can't scan hide system file.
    8. Move from main trunk for fix shareport login with chapcha.
    9. Fix one issue about mac filter issue through mydlink.
    10. Fix one issue about wireless ACL bug.
    11. Fix one issue that failed connected device will not be shown on
        mydlink portal list.
    12. Fix one issue that parsing network statistics causes device response
        slowly.
    13. Refine mfc mode to speed up F4 test.
    14. Bug fixed:
        49. [Samba ] Sometime can not access the USB device.
        127. [IPv6, 6in4 tunnel] DUT can't connect to tunnelbroker.
        171. [iTune] iTune sometimes can not work normally.
        124. [Multicast packets+Group key update]
        93. [Guest Zone + WPA-PSK] After config something then STA couldn't
            get IP from Guest Zone
        194. [Mydlink] Enable E-mail notify, after DUT reboot, the "failed connect"
             check box is still empty.
        190. [security issue]: shell script injection in diagnostic.php
        188. [Shareport] After enable graphical authentication, both shareport web access
             and shareport mobile can not work.
        186. [Wireless] Sometimes STA is hard to connect DUT with security: WPA2-PSK-AES
        183. [Old fw updaet new fw or config] User can't set any settings anymore after
             updating new fw or config.
        177. [IPv6+Performance] IPv6 performance is low
        174. [DUT hang] Turn on the DUT power and do nothing, DUT's memory decreasing
             with time.
        175. [QoS+PPTP] After QoS is enable, LAN PC pinging WAN PC fail over PPTP.
        176. [ACL+PPTP] After set ACL, LAN PC pinging WAN PC fail over PPTP.
        193. [NAT Performance] DHCP NAT TX throughtput will drop when changing hostname/DNS
        187. [Wireless 5G] 5G bandwidth on web GUI always show 20/40/80.
        192. [web, firmware update] After updating firmware, the seconds of coundown page
             will return 261 at 85th second.
        178. [EasySetup+TimeZone] EasySetup wizard can't show correct time zone
        141. [Mydlink] Failed connected device will not showed on the mydlink portal list.
        202. [Mydlink][Mac filter] Disable a client from mydlink portal, after that can't
             change mac filter setting.
        184. [IPv6] 6rd does not work.
        201. [my dlink, android apps] In mydlink portal, after remove blocked record, there will
             presents empty records in android apps.
        173. [IPv4 Muticast stream] After send multicast packets for two hours from WAN to LAN,
             the DUT's WEB can't be accessed.
        180. [ Multi-Country Channel ] The 5G and 2,4G channel run incorrect channel. (Ex. LA)
        179. [SPI+Samba] Can't access USB resource with SPI enabled
        150. [IPv6] 6to4 does not work.
        139. [PPPoEv6] When change PPPOEv6 from share with ipv4 to create a new session, NAT of
             ipv4 doesn't work.
        135. [Samba endurance] Run Samba over night then the USB storage is not accessiable.

----------------------------------------------------------------------------
build: d4oi v1.05 KR b03;   2013/04/24
svn://1.2.3.100/elbox/branches/dir850lKR: 36179
Note:
    1. Correct 5G band width display
    2. Support 128 stations.
    3. Correct mydlink issue of "log_wirelesswarn".
    4. Fix WAN disconnect issue when WAN type is DHCPC.
    5. Correct web page captcha of shareport.
    6. Fix a mac filter bug with blank block through mydlink.
    7. Fix a wireless ACL bug of mydlink.
    8. Fix a mydlink bug: failed connected device will not showed on the mydlink
       portal list.
    9. Add an additional rule for check hostname.
    10. Fix SDMZ issue of normal station can't access internet.
    11. Change default time zone to Seoul.

----------------------------------------------------------------------------
build: d4bh v1.05 KR b02; Freddy <Freddy_Hsueh@alphanetworks.com> 2013/04/12
svn://1.2.3.100/elbox/branches/dir850lKR: 35819
Note:
    1.    Default setting value
    -Disabling check-box for ¨Always Broadcast??in the LAN networkingg setting.
    -Enabling check-box for ¨Use unicasting??in the WANN Internet setting.

----------------------------------------------------------------------------
build: d4bh v1.05 KR b01;   2013/04/11
svn://1.2.3.100/elbox/branches/dir850lKR: 35785
Note:
    1. Remove the patch to support 128 stations temporary.
    2. Add control page for IPTV port setting.
    3. Fixed the security issue highlighted by DEUR and DUSA.
    4. The FW version is updated to v1.05KRB0x.
    5. 2.4G band supports repeater.
    6. Refine DMZ page allignment.

----------------------------------------------------------------------------
build: d4al v1.05 b03;   2013/04/10
svn://1.2.3.100/elbox/branches/dir850lv100: 35739
Note:
    1. Remove the patch to support 128 stations temporary.
    2. Fix security issue of "diagnostic.php".
    3. Correct the count down behavior after upgrading firmware.
    4. Fix 6RD problem.
    5. Correct private IP leakage issue while running BT.

----------------------------------------------------------------------------
build: d3tg v1.05 b02;   2013/03/29
svn://1.2.3.100/elbox/branches/dir850lv100: 35362
Note:
    1. Fix bug: Removed USB disk may leasve mount point in /tmp/storage.
    2. Fix bug: Refine disk unmount flow. So that ntfs-3g will be terninated
       instead lock. New inseted USB disk can't be mounted in this issue.
    3. Fix mydlink issue: It can't log in mydlink portal when CAPTCHA is
       enabled.
    4. Remove uneccessary sentences in QoS page.
    5. Revise tag name to fit mydlink's demand.
    6. Correct INET LED bevior when WAN type is static.
    7. Fix secutiry issue:
       a. telnetd is for factory used only and only can be started in default status.
       b. Remove Command.php.
       c. Remove router_info.xml.
       d. Refine version.php.
       e. Refind service.cgi.
    8. Fix EAP issue.

----------------------------------------------------------------------------
build: d3mi v1.05 b01;   2013/03/22
svn://1.2.3.100/elbox/branches/dir850lv100: 35087
Note:
    1.  Base on v1.03 b01
    2.  Fix bind.php issue.
    3.  Support world wild channel list
    4.  Fix memory leakage issue after supporting max 128 station.
    5.  Fix bug that disconnection will happen in enabling qos and after rebooting.
    6.  Correct 5G band WIFI mode.
        (After upgarding firmware mix a/n/ac will become ac only.)
    7.  Modify security issue of buffer overflow(move from main trunk 34714)
    8.  Replace picture of web page of freset-wizard
    9.  Correct group key id when use sw encrypt.
    10. Correct HW version displayed on web page.
    11. Modify for 16:9 firefox bannercontainer error
    12. Fixed a system crash bug when recieved a MIC_FAILURE package.
    13. Remove ISP from Internet wizard
    14. Update Anti-Interference patch. (To fix IOT with Broadcom ac dongle.)
    15. Fix the issue mydlink can't login when CAPCHA is enabled.
Bug fix:
    93.  [Guest Zone + WPA-PSK] After config something then STA couldn't get
         IP from    Guest Zone                            
    124. [Multicast packets+Group key update]                                                                              
    127. [IPv6, 6in4 tunnel] DUT can't connect to tunnelbroker.                                                            
    139. [PPPoEv6] When change PPPOEv6 from share with ipv4 to create a new
         session,NAT of ipv4 doesn't work.              
    150. [IPv6] 6to4 does not work.                                                                                        
    173. [IPv4 Muticast stream] After send multicast packets for two hours from
         WAN to LAN, the DUT's WEB can't be accessed.
    175. [QoS+PPTP] After QoS is enable, LAN PC pinging WAN PC fail over PPTP.                                              
    176. [ACL+PPTP] After set ACL, LAN PC pinging WAN PC fail over PPTP.                                                    
    177. [IPv6+Performance] IPv6 performance is low                                                                        
    179. [SPI+Samba] Can't access USB resource with SPI enabled                            

----------------------------------------------------------------------------
build: d3lk v1.04 b03;   2013/03/21
svn://1.2.3.100/elbox/branches/dir850lv102b02: 35060
Note:
    1. Fix channel list issue of SG and LA.

----------------------------------------------------------------------------
build: d3kl v1.04 b02;   2013/03/20
svn://1.2.3.100/elbox/branches/dir850lv102b02: 35016
Note:
    1. Support countries of CA, SG, LA, BR based on "WiFI Frequency table20130222"
    2. Modify for 16:9 firefox bannercontainer error.

----------------------------------------------------------------------------
build: d3jj v1.03KR b01;   2013/03/19
svn://1.2.3.100/elbox/branches/dir850lKR: 34966
Note:
    1. First release for KR.
    2. Super DMZ is ready.
    3. Repeater is ready but there is some problem to web page.
    4. KT service isn't integrated to web page.

----------------------------------------------------------------------------
build: d3fi v1.04 b01;   2013/03/15
svn://1.2.3.100/elbox/branches/dir850lv102b02: 34847
Note:
    1. Based on v1.03 b02.
    2. Support AU channel list.(DFS is turned off.)
    3. Fix the issue of buffer overflow.
    4. Correct HW version from 1A1G to A1.
    5. Correct picture displyed in web wizard.

----------------------------------------------------------------------------
build: d3cl v1.03 b02;   2013/03/12
svn://1.2.3.100/elbox/branches/dir850lv102b02: 34689
Note:
    1. Based on v1.02 b02 to fix bind.php security issue.

----------------------------------------------------------------------------
svn://1.2.3.100/elbox/branches/dir850lv100: 34620
build: d37n v1.03 b01:   2013/03/07
Note:
    1. Support max 128 stations.
    2. To fix the issue of private IP packet found from WAN.
       (Queued packets will be sent with private ip.)
    3. Disabled all DFS support.
    4. Fix mydlink issue. Real-Time Browsing history shows nothing via
       mydlink.
    5. 5GHz default wlan mode to Mixed ac.
    6. Support wireless mode ac only and ac+n.
       Remove TKIP when wireless mode is n, ac and ac+n.
    7. Web page will be re-directed to wizard after setting factory default.
Bugs fix:
    32.  [SPI+Samba] Can't access USB resource with SPI enabled
    70.  [QoS Engine] The QoS engine's bandwidth control and priority work
         fail.
    109. [IPv6+Performance] IPv6 performance is low.
    128. [Multicast stream+Leave suddenly] Play movie at Lan and wireless
         side, Lan side wil be leaved suddenly.
    130. [Internet led] When plug-out wan port and plug-in quickly, the
         internet led still orange-solid.
    132. [EasySetup+TimeZone] EasySetup wizard can't show correct time
         zone.
    142. [Mydlink] Real-Time Browsing history shows nothing.
    148. [Statistic] The WAN port count does not work.
    152. [ Wireless IOT ] If use Intel 6205 STA to ping AP, it is easy ping
         timeout. (In fact it's already fixed in v1.00 b14.)
    162. [PPTP Domain name+Internet] PPtP can't dial up with server's FQDN.
    166. [BT] When disconnect and reconnect WAN port, the WAN port will find
         LAN private source IP.

----------------------------------------------------------------------------
svn://1.2.3.100/elbox/branches/dir850lv101b02: 34516
build: d31k v1.02 b02; Soul <Soul_Huang@alphanetworks.com> 2013/03/01
Note:
    1. Modify ethernet 8367 rx delay time value to 2 from 4.

----------------------------------------------------------------------------
svn://1.2.3.100/elbox/branches/dir850lv101b02: 34435
build: d2rd v1.02 b01;   2013/02/27
Note:
    1. Patch from Realtek.
       Remove the FAB ID checking in 8367RF probe function.
       So that it can reconize 8367RB correctly no matter which FAB makes
       this 8367RB IC.

----------------------------------------------------------------------------
svn://1.2.3.100/elbox/branches/dir850lv101b02: 34248
build: d28g v1.01 b03;   2013/02/08
Note:
    1. Turn off FCC DFS.

----------------------------------------------------------------------------
svn://1.2.3.100/elbox/branches/dir850lv100: 34222;
build: d26m v1.01 b02;   2013/02/06
Notes:
    1. Turn on PPtP/L2TP.

----------------------------------------------------------------------------
svn://1.2.3.100/elbox/branches/dir850lv100: 34198;
build: d26g v1.01 b01;   2013/02/06
Bug fix:
    10. [Jumbo Frame] The lan port can not forward the jumbo packets.
    14. [Status] WAN info show nothing when DUT connect to L2TP server
        successfully.
    20. [WAN Status] WAN status always show disconnected.
    57    [Multicast stream] Disable another NIC drever, the multicast stream
        throughput will go down to about 5 Mbps.
    62    [EasySetup+CN] Some strings aren't translated.
    64    [WAN+IP STATUS] The WAN IP in STATUS page always show 0.0.0.0.
    75    [PC list in STATUS page] PC list in STATUS page show wrong info.
    91    [SharePort WEB Access] (folder view) it can not display the files in
        the root directory.
    99    [Shareport utility] From Share port WEB access , it can not display
        the files in root directory.
    100    [Private IP from WAN side] The src ip of packet from WAN will use
        private IP when running BT.
    101    [WAN Port Speed] Set WAN port speed does not work.
    107    [Smart phone] When multiple smart phone connecting, iphone and ipad
        mini are difficult to connect to DUT.
    136    [EasySetup+CN] Some strings need fix
    138    [Help]There is no NAT Endpoint Filtering function in Firewall settings
        but in Help page.
Note:
    1. Add channel list for KR.

----------------------------------------------------------------------------
svn://1.2.3.100/elbox/branches/dir850lv100b12: 34024;
build: d1ug v1.00 b14;   2013/01/30
Notes:
    1. This release is based on b12.
    2. Add patch from Realtek to improve Intel 6205 IOT issue.
    3. Correct internet LED behavior.
    4. PPtP and L2tP function are hidden.

----------------------------------------------------------------------------
svn://1.2.3.100/elbox/branches/dir850lv100: 33997;
build: d1u0 v1.00 b13;   2013/01/29
1. Bugs fix:
      6. [WEB page] Some WEB pages display very slow.( about 5~10 sec).
     69. [PPTP+NAT function] Change PPTP dynamic and PPTP Static many times,
         the NAT function fail.
    117. [Mydlink] Enable "device failed to connect", after apply and reboot.
         The setting is still disable.
    118. [Mydlink] Send reboot command from mydlink web page. After the
         countdown is over, the page won't show normally.
    122. [Mydlink] After enable graphical authentication, the mydlink web page
         won't show normally.
2. Patch from Realtek:
    To improve IOT with Intel 6205.(2.4G)
3. Correct Internet LED behavior.

----------------------------------------------------------------------------
svn://1.2.3.100/elbox/branches/dir850lv100: 33847;
build: d1pi v1.00 b12;   2013/01/25
Note:
    1. Apply Realtek patch to correct initialization of ac Rx gain.
    2. Fix WAN connection detection of easy setup.

----------------------------------------------------------------------------
svn://1.2.3.100/elbox/branches/dir850lv100: 33811;
build: d1oe v1.00 b11;   2013/01/24
Note:
    1. Apply Realtek patch to fix group key update issue.
       WLAN driver will follow hostapd's control to setup key id, not only
       update key value in slot.
    2. Apply Realtek patch to fix issue when mobile device accesses Youtube
       via app. The traffic from WLAN to WAN won't be redirected to HW NAT.

----------------------------------------------------------------------------
svn://1.2.3.100/elbox/branches/dir850lv100: 33798;
build: d1nh v1.00 b10;   2013/01/23
Note:
 1. DHCP server will send Offer/Ack with unicast in default status.
 2. Bug fix:
    52. [5G low throughput in v1.00b05] with Intel 6300
     51. [2.4G low throughput in v1.00b05] with Intell 6300/DWA-865L/
         DWA-160 B2 and reconnrct pass
     15. [5G band] Use Intel 6300 to connect 5G band, the data rate only 144M.
      7. [Interference] When open door and close door in shielding room, the
         throughput is low.
     35. [5G low throughput in v1.00b04] with DIR-865L
     41. [Schedule+Status] Channel should display N/A when radio is not
         working
     28. [Shareport] Shareport access link should not appear when WAN port is
         not connected
     81. [MTU+Message] Some warning message need traslate to
         chinese-simplified
     94. [Access Control] Web can't display the "Default schedule rule" in the
         STEP 2
    108. [DMZ + WebUI] The position of "Computer name" was incorrect
     96. [Language + Access Control ] "Web" should be "port"
     95. [Website filter] lost the "Remaining number of rules"
     76. [WAN+DHCP] The "Release"/"Renew" button on device info page only work
         once
     73. [Help] Support link should change to support.dlink.com
      9. [Interference] Adjacent channel fail.
     32. [5G low throughput] with DWA-183A1
     30. [2.4G low throughput in v1.00b03] with Intell 6300/ DWA-183A1 /
         DWA-865L
     19. [Transmit power] The function of power level don't work.

----------------------------------------------------------------------------
svn://1.2.3.100/elbox/branches/dir850lv100: 33735;
build: d1kk v1.00 b09;   2013/01/21
Note:
 iTune default should be enabled.

----------------------------------------------------------------------------
svn://1.2.3.100/elbox/branches/dir850lv100: 33733;
build: d1jm v1.00 b08;   2013/01/20
Note:
 Update default status of DLNA and iTune. Default should be enabled.

----------------------------------------------------------------------------
svn://1.2.3.100/elbox/branches/dir850lv100: 33727;
build: d1im v1.00 b07;   2013/01/18
Bug fix:
 34. [Hidden page] CN string lack :
 59. [PPTP server with Domain name] PPTP client can't connect PPTP server
     with Domain name.
 69. [PPTP+NAT function] Change PPTP dynamic and PPTP Static many times, the
     NAT function fail.
 71. [iTunes server] It can't work normally.
 81. [MTU+Message] Some warning message need traslate to chinese-simplified.
Patch:
 Improve throughput when interference.
 Improve 11ac polling station for power saveing.

----------------------------------------------------------------------------
svn://1.2.3.100/elbox/branches/dir850lv100: 33662;
build: d1hh v1.00 b06;   2013/01/17
Bug fix:
 40. [ WAN vs Wireless ] Run Chariot form wireless to WAN or WAN to wireless
 fail.
 34. [Hidden page] CN string lack :
 63. [Device Info] One string display Chinese-Traditional font
 61. [Language pack, CN] In DDNS page, miss left parenthesis of hours.
 22. [CN+Guest Zone] Some strings need fix
 8.  [Device info] One string need to remove the " period".
 48. [Help-DS-Lite] The DS-Lite string is duplicate , please remove it.
 43. [L2TP+MTU] MTU warning message not to be transtalted in CN
 42. [5G+CN] 5G hidden SSID option is not transtalted
 5.  [DLNA] DLNA server can't work
 38. [2.4G+Channel] Set channel to 12/13, it will become channel 1
 49. [Samba ] Sometime can not access the USB device.
Notes:
 1. Update rtl8192dfw_n.bin and rtl8812fw_n.bin.
    They will help WLAN driver stability.

----------------------------------------------------------------------------
svn://1.2.3.100/elbox/branches/dir850lv100: 33580;
build: d1ce v1.00 b05;  
Note:
 1. Correct station RSSI displayed.
 2. Correct PA type setting in flash command.
 3. apsd_enable should be 0 for RX throughput.
Bug fix:
21. [Guest+WPA2-AES] STA can't connect to guest zone with WPA2-PSK-AES.
23. [Hidden Page] Lose 5G MAC info.
25. [Copyright] Copyright on web file access login page should change to 2013.

----------------------------------------------------------------------------
svn://1.2.3.100/elbox/branches/dir850lv100: 33553;
build: d1ba v1.00 b04;  
Note:
Patch Realtek WLAN driver (3.2 SDK with 11ac sync to 3.4.2, 2013.01.04).

----------------------------------------------------------------------------
svn://1.2.3.100/elbox/trunk: 33540;
build: d1ae v1.00 b03;  
Note:
Bug fix:
1. [Endurance, multi-client] With 20 stations and Internet connection, DUT
   reboots  several times.
2. [LLTD icon] The DIR-850L LLTD icon is incorrect.
3. [PPPoE] Run PPPoE throughput will cause DUT reboot.
4. [Auto Channel+5G] 5G auto channel function should not select non-support
   channel.
11. [2 Wireless STAs + Click Web ] DUT hangup then auto reboot.
12. [Status, Internet session] DUT auto reboot when user login "Internet
   session" page.
16. [Wireless, channel] Select any channel, the real used channel still is
   ch36.

----------------------------------------------------------------------------
svn://1.2.3.100/elbox/trunk: 33485;
build: d17k v1.00 b02;  
Note:
Fix kernel panic caused by un-alignment mermory access during
PPtP throughput test.

----------------------------------------------------------------------------
svn://1.2.3.100/elbox/trunk: 33379;
build: ccsa v1.00 b01;  
Note:
1. First release for lab in.
Known issue:
1. Kernel panic when accessing access control for web filter.
2. Kernel panic when test L2tP throughput.
3. Wizard auto WAN detection doesn't work well.
4. DDNS doesn't work.
5. 11ac/11g concurrent endurance fails at 14th hours.
6. Samba daemon "sometime" disappears when insert/eject USB storage.
7. 20 station ftp endurance pretest fails.
La prima cosa da leggere in questo forum | Siti globali D-Link

Siate CHIARI SINTETICI E DETTAGLIATI altrimenti non possiamo aiutarvi!!!

N.B. Purtroppo non ho il tempo di rispondere in PVT: 1) usa un motore di ricerca; 2) usa la funzione "Cerca" del forum; 3) chiedi nel forum. GRZ!!!
Questo forum non è un centro assistenza, ma una comunità.
Prima di chiedere a NOI di risolvere il problema che hai TU, chiediti come TU puoi dare una mano a TUTTI.

Cita messaggio
#15
Aggiunto nel 1° messaggio collegamento alternativo per scaricare il pacchetto lingua italiana.
La prima cosa da leggere in questo forum | Siti globali D-Link

Siate CHIARI SINTETICI E DETTAGLIATI altrimenti non possiamo aiutarvi!!!

N.B. Purtroppo non ho il tempo di rispondere in PVT: 1) usa un motore di ricerca; 2) usa la funzione "Cerca" del forum; 3) chiedi nel forum. GRZ!!!
Questo forum non è un centro assistenza, ma una comunità.
Prima di chiedere a NOI di risolvere il problema che hai TU, chiediti come TU puoi dare una mano a TUTTI.

Cita messaggio
#16
Pubblicato firmware DIR-850L A1 1.13 build 01_f4if 20150418.

Codice:
DIR-850L Firmware Patch Notes
Firmware: FW1.13.B01 (WW)
Hardware: A1
Date: 2015/04/24

Note:
None

Problems Resolved:
• Fixed Security vulnerabilities as described on [SAP10054]
- HNAP Privilege Escalation
- Command Injection
For details visit:
http://securityadvisories.dlink.com/security/publication.aspx?name=SAP10054

Enhancements:
None

Known Issues:
None
La prima cosa da leggere in questo forum | Siti globali D-Link

Siate CHIARI SINTETICI E DETTAGLIATI altrimenti non possiamo aiutarvi!!!

N.B. Purtroppo non ho il tempo di rispondere in PVT: 1) usa un motore di ricerca; 2) usa la funzione "Cerca" del forum; 3) chiedi nel forum. GRZ!!!
Questo forum non è un centro assistenza, ma una comunità.
Prima di chiedere a NOI di risolvere il problema che hai TU, chiediti come TU puoi dare una mano a TUTTI.

Cita messaggio


Vai al forum:


Utenti che stanno guardando questa discussione: 1 Ospite(i)