Valutazione discussione:
  • 0 voto(i) - 0 media
  • 1
  • 2
  • 3
  • 4
  • 5
DWR-932 Router 4G LTE portatile
#1
DWR-932
Router 4G LTE portatile a batteria con Hotspot Wi-Fi 150 Mbps
Versione Hardware: A1, B1, C1, D1

[Immagine: dwr932dside.png?w=500]
DWR-932 D1

[Immagine: dwr932c1image-lfront.png?w=600]
DWR-932 C1

[Immagine: amazon.jpg]

Particolarità
Fast Mobile Broadband for All Your Devices
Connect your high-speed mobile broadband connection to multiple Wi-Fi devices such as smartphones, tablets and notebook computers

Stay Safe
A built-in firewall protects against attacks over the Internet, and industry-standard WPA/WPA2 security prevents unauthorised access to your network

Stay Connected, Wherever You Are
Small enough to fit in your pocket with high-capacity rechargeable battery, lets you work and play for longer on the go

Caratteristiche
Connectivity
• Uses a SIM card to connect to the 4G LTE mobile Internet
• Compatible with 802.11n/g/b devices
• Micro-USB port for easy charging

Portability
• Up to 8 hours of battery life in one charge so you stay connected for longer
• Portable design is small enough to fit in your pockets to take with you wherever you go
• Support Wi-Fi offloading technology

Security
• WPA/WPA2 Wi-Fi security protocols provide the latest in wireless security
• Built-in firewall blocks unauthorised connections
• Wi-Fi Protected Setup (WPS) for one-touch secure setup with other devices

Panoramica
The DWR-932 4G LTE Mobile Wi-Fi Hotspot 150 Mbps is a 4G/LTE Cat4 high speed broadband Wi-Fi mobile hotspot. The DWR-932 uses a 4G Internet connection to give you a simple and fast Wi-Fi network anywhere you need³. Instead of limiting your mobile Internet connection to a single device through a USB dongle, the DWR-932 allows you to create a Wi-Fi hotspot to share your Internet connection with multiple devices. The portable size and battery powered enabled you to share your connection anywhere. Share a single mobile Internet connection with your friends or colleagues to send and receive e-mail, surf the Internet or make VoIP calls, on multiple devices, all at the same time.

Connect Anywhere
Simply insert your data-enabled SIM card and share you Internet to let your family and friends stay connected. Ideal for business trips to share an Internet connection during a meeting or while travelling, allowing you to provide all your travel companions Internet access whether, they’re using a laptop or a mobile device.

Flexible Usage
The DWR-932 4G LTE Mobile Wi-Fi Hotspot 150 Mbps gives you instant connectivity in a powerful yet portable device that fits easily into your pocket, wherever you go. Wi-Fi Protected Setup (WPS) lets you create a secure Wi-Fi network with just the touch of a button. The rechargeable 2640 mAh Li-on battery allows you to stay connected for longer periods of time and it’s plug-and-play with no complicated software to install. Getting online with the DWR-932 4G LTE Mobile Wi-Fi Hotspot 150 Mbps is quick, easy and convenient.

Specifiche
General
Frequency Support¹
• GSM/GPRS/EDGE: 850/900/1800/1900 MHz
• FDD-LTE: Band 3, 7, 20
• LTE output power class: 23 dBm (class 3)

Data Throughput²
• Downlink up to 150 Mbps
• Uplink up to 50 Mbps

Security
• WPA/WPA2 PSK Auto (TKIP/AES)
• WPS Push-Button Connection

Advanced Functions
• Built-in firewall
• Built-in NAT
• UPnP

Physical
Interfaces
• 802.11n/g/b wireless LAN
• 6-pin USIM card interface
• Micro-USB port
• Micro SD card slot

Antenna
• DL SIMO (1x2)
• 2T2R Wi-Fi antenna
• 1T2R LTE/3G antenna

Display
• Network type
• Signal strength
• Roaming status
• SMS & SMS status
• Internet connection status
• Carrier
• Battery status
• Wi-Fi & security status
• Wi-Fi clients

Power
• DC 5 V/1 A ± 5%

Battery
• 2640 mAh Li-ion battery

Battery Life
• Standby - up to 500 hours
• Idle time - up to 50 hours (Wi-Fi on)
• Idle time - up to 100 hours (Wi-Fi off)
• LTE - up to 8 hours
• 3G - up to 10 hours
• 2G - up to 10 hours

Dimensions
• 70.6 x 70.6 x 16.6 mm

Weight
• 140 g

Operating Temperature
• -10 to 45 ˚C (14 to 113 ˚F)

Storage Temperature
• -10 to 70 ˚C (14 to 158 ˚F)

Operating Humidity
• 10% to 90% (non-condensing)

Certifications
• CE
• RoHS

¹ Supported frequency band is dependent upon regional hardware version.
² Data rates are theoretical. Data transfer rate depends on network capacity and signal strength.
³ Please check regional mobile operators for 4G LTE/3G mobile Internet availability.

D-Link European Headquarters. Updated April 2016

[Immagine: dwr-932_b1side.png]
DWR-932 B1

[Immagine: dwr-930_a1side_0.png]
DWR-932 A1

Documentazione
H/W Ver.: D1
Scheda tecnica
Guida installazione
Manuale utente

H/W Ver.: C1
Scheda tecnica
Guida installazione
Manuale utente

H/W Ver.: B1
Scheda tecnica
Guida installazione
Manuale utente

H/W Ver.: A1
Scheda tecnica
Guida installazione
Manuale utente

Firmware
H/W Ver.: D1
4.00 eu b04 en 20151125

H/W Ver.: C1
2.00 eu b02 en 20161011

H/W Ver.: B1
DWR932-DLINK_161017 (02.05WW).zip
8271-DWR932-DLINK_150616_02.04WW.zip
DWR-932_fw_revB1_2-03EU_eu_en_20161031.zip

H/W Ver.: A1
DWR-932_A1_v2.00.00.0312.zip | DWR-932 A1 FW_2.00.00.0312 release note_20140321.doc

Supporto internazionale D-Link
Pagina prodotto: Italia | Taiwan-B1 | Medio Oriente: B1, C1 | Iran: A1, B1, C1, D1
Sito FTP: Europa, Germania
Supporto Tecnico: Taiwan TSD | Iran: A1, B1
Cita messaggio
#2
Documentazione multimediale
H/W Ver.: D1
digikala (Visuale esterna del prodotto in 3D)
RighTel (Foto)
MobilMania (Foto)




H/W Ver.: B1






Cita messaggio
#3
Disponibile nuovo firmware per versione hardware Bx (primo messaggio).
Cita messaggio
#4
Fonte D-Link IT>Supporto>Tech Alerts
Multiple potential vulnerabilities found in the DWR-932 H/W vers. B1
mercoledì 19 ottobre 2016 08:57

Overview

It has recently been reported that multiple vulnerabilities are found on hardware version B1 of the D-Link DWR-932 4G LTE Mobile Router. Only this end-of-life hardware version B1 is potentially affected by the reported vulnerabilities. The current shipping hardware version D1 or any other hardware versions are not affected.



Reference

● https://pierrekim.github.io/blog/2016-09...l#backdoor



Current Status

Security is of the utmost importance to D-Link across all product lines. This is not just through the development process but also through regular firmware updates to comply with the current safety and quality standards. After a full investigation into all the vulnerabilities reported, it became clear that most of the claims have been falsely stated. These false claims include:

● Default WPS PIN
   ○ [D-Link] The WPS PIN function is disabled by default. Should a user decide to enable WPS PIN, they have the option to create their own unique PIN.
● Weak WPS PIN Generation - with a reverse-engineered algorithm
  ○ [D-Link] The WPS PIN function is disabled by default. If the user chooses not to use the automatically generated WPS PIN, they have the option to create their own unique PIN.
● Leaking No-IP account (?)
   ○ [D-Link] There is no DDNS function on the DWR-932 H/W vers. B1, this vulnerability is not possible.
● Remote FOTA (Firmware Over The Air)
   ○ [D-Link] There is no remote FOTA function on the DWR-932 H/W vers. B1, this vulnerability is not possible.
● Bad security practices
   ○ [D-Link] The user has the ability to set unique Wi-Fi SSID and password through the web configuration to secure their Wi-Fi network. It is impossible to access shell commands if potential attackers cannot connect to the secure Wi-Fi network.
● Security removed in UPnP
  ○ [D-Link] The UPnP function is disabled by default. The user has the ability to set unique Wi-Fi SSID and password through the web configuration to secure their Wi-Fi network. It is impossible to enable UPnP or add firewall rules if the potential attacker cannot connect to the secure Wi-Fi network.



Update 19th October, 2016 - An updated firmware (v2.03), which addresses all other vulnerabilities reported, is now available to download. To upgrade the firmware, please log in to the device web configuration (accessible by entering "192.168.0.1" in your web browser address field). Under the System tab, select Firmware Upgrade. Choose the file you have just downloaded (you do not need to unzip the file) and press Start Update. Once the update is completed, press OK to reboot the device. Once the device has rebooted, please press the WPS and Power button together simultaneously and hold for 10 seconds to factory reset the device. Please remember to change the device administrator and Wi-Fi password to a unique password.



Affected Products

● DWR-932 H/W vers. B1

Fonte DWR-932 B1 2.03EU_ReleaseNote_20161012.doc
Codice:
DWR-932

VERSION: 02.03EU
Release date: 2016-10-12
Firmware Version: 02.03EU
Hardware Version: B1

ENHANCEMENTS & NEW FEATURES
1. Disable telnet
2. Disable SSH
La prima cosa da leggere in questo forum | Siti globali D-Link

Siate CHIARI SINTETICI E DETTAGLIATI altrimenti non possiamo aiutarvi!!!

N.B. Purtroppo non ho il tempo di rispondere in PVT: 1) usa un motore di ricerca; 2) usa la funzione "Cerca" del forum; 3) chiedi nel forum. GRZ!!!
Questo forum non è un centro assistenza, ma una comunità.
Prima di chiedere a NOI di risolvere il problema che hai TU, chiediti come TU puoi dare una mano a TUTTI.

Cita messaggio


Vai al forum:


Utenti che stanno guardando questa discussione: 1 Ospite(i)