Appunti sparsi di compilazione firmware router

Pondera · 13 Aprile 2016, 09:05:45

Appunti sparsi
di compilazione firmware router

Pondera · 13 Aprile 2016, 09:13:49


=========================
0. Intriduction

   This file will show you how to build the GPL linux system.
   
Step 1. Install fedora linux 10 (choose Software Development) on 32bit CPU.

Step 2. Setup Build Enviornment($means command)

 1) please login as a normal user such as john,and copy the gpl file to normal user folder,
 
 such as the folder /home/john
 
 2) $cd /home/john
 
 3) $tar zxvf DIR645A1_GPL101.tar.gz
 
 4) $cd DIR645A1_GPL101
 
 5) #cp -rf mipsel_gcc-4.3.3_uclibc-0.9.30.1 /opt (ps : switch to root permission)

 6) #rpm -ivh ./build_gpl/fakeroot-1.9.7-18.fc10.i386.rpm
  
 7) $source ./setupenv (ps : switch back to normal user permission)
 
Step 3. Building the image
 1) $make
 2) $make
 3) $make
     ===================================================
 You are going to build the f/w images.
 Both the release and tftp images will be generated.
 ===================================================
 Do you want to rebuild the linux kernel ? (yes/no) : yes
 
      4) there are some options need to be selected , please input "enter" key to execute the default action. 
 
      5) After make successfully, you will find the image file in ./images/.

Pondera · 13 Aprile 2016, 09:25:13

Fonte D-Link Forums USA

Citazione di: 'ambercap'Here are the steps I used:
I downloaded and installed VirtualBox from Oracle (free).
The GPL readme.txt says:
Install fedora linux 10 (choose Software Development) on 32bit CPU.
Fedora 10 is EOL so you can't find it on their website anymore, but I did manage to find a torrent for this which worked (took about 8 hours to download)!
So I created a new Fedora VM in VirtualBox with 1GB memory installed and 8GB dynamic HDU, with Fedora 10 32-bit, and selected the install options for "Software Development".
After installing system updates, I then followed the remaining instructions exactly:
Copy the DIR645.tar.gz file to ~/
cd ~
tar zxvf DIR645.tar.gz
cd DIR645

Then run su to become root.
cp -rf mipsel_gcc-4.3.3_uclibc-0.9.30.1 /opt
rpm -ivh ./build_gpl/fakeroot-1.9.7-18.fc10.i386.rpm
Then exit su

source ./setupenv
Then run make 3 times:
make
make
make
Enter yes to build the kernel and choose defaults
F/w will be in ./images/.

Fonte D-Link Forums USA

Citazione di: 'Paul2'You can find them here:
http://ftp-stud.hs-esslingen.de/pub/Mirrors/archive.fedoraproject.org/fedora/linux/releases/

Appunti sparsi di compilazione firmware router

Pondera

Pondera

Pondera