Valutazione discussione:
  • 2 voto(i) - 5 media
  • 1
  • 2
  • 3
  • 4
  • 5
D-Link powerline DHP-500AV, DHP-P500AV e kit DHP-501AV
(02-09-2014, 15:50)devilstorm Ha scritto:
(31-08-2014, 14:11)marika43 Ha scritto: l'aggiornamento firmware non ha funzionato con la utility avitar...

dopo aver selezionato "LOAD FW" nell'applicazione AVITAR, si seleziona il file . pib e l'utility emette un msg di errore.

it is easy.

1. select your device. if you cannot find your device select the correct network adapter first. You should see mac and firmware version of the device.

2. you may click read pib now. it will try to convert to the most recent version which will result in an error. That is ok.

3. You may also use defaults and just check legacy upgrad. To be safe enter the MAC in the field above.

4. Click LOAD FW

It works.

It would be nice to have an updated firmware expecially if it fix the random disconnection drops that aflict this model ( DHP-P501AV in my case ).

By the way I have 2 question anyway.

1) is there the risk to brick the device by flashing this firmware?
2) Is that possible to go back to the official firmware version in any moment?
Cita messaggio
(16-09-2014, 20:34)abraz artz Ha scritto: It would be nice to have an updated firmware expecially if it fix the random disconnection drops that aflict this model ( DHP-P501AV in my case ).

By the way I have 2 question anyway.

1) is there the risk to brick the device by flashing this firmware?
2) Is that possible to go back to the official firmware version in any moment?


1) There is always a risk (powerloss is always bad during firmware flash).
2) It does not check if the firmware version, so downgrading (reverting) is possible.
Cita messaggio
(07-10-2014, 17:02)devilstorm Ha scritto:
(16-09-2014, 20:34)abraz artz Ha scritto: It would be nice to have an updated firmware expecially if it fix the random disconnection drops that aflict this model ( DHP-P501AV in my case ).

By the way I have 2 question anyway.

1) is there the risk to brick the device by flashing this firmware?
2) Is that possible to go back to the official firmware version in any moment?


1) There is always a risk (powerloss is always bad during firmware flash).
2) It does not check if the firmware version, so downgrading (reverting) is possible.

Powerloss shouldn't be a great problem to me because I have the PC connected to an UPS. Regarding downgrading, it need to be done with the d-link utilty or with the one that you provide?

Also you have reported those models D-Link powerline DHP-500AV, DHP-P500AV and kit DHP-501AV ...Actually I have the DHP-P501AV ( http://www.dlink.com/it/it/support/produ...dapter-kit ) kit which has the passtrough port..it's the same firmware or it's different?
Cita messaggio


Vai al forum:


Utenti che stanno guardando questa discussione: 1 Ospite(i)