Menu principale

DIR-815: Router Dual Band Wireless N 600

Aperto da Pondera, 12 Febbraio 2011, 11:41:22

safesky66

Avevo quello originale di fabbrica 1.0. Il B1 è il primo che ho messo perchè credevo fosse il più aggiornato. Ora quando entro nel router leggo firmware 1.03 Fri 09 Mar 2012. Dovevo aggiornare con un altro file?

Pondera

Eh?!?  ???
Scusa puoi riportarci i dati scritti sull'adesivo sotto al dispositivo?

safesky66

P/N  EIR815EEU.....A1E
H/W Ver: A1 F/W Ver.: 1.00
S/N PVIC...........

safesky66

Ciao e scusate tutti ancora; non so se hai ricevuto il messaggio precedente con le sigle presenti sull'etichetta adesiva. Quale dei firmware dovrei utilizzare per risolvere il problema di perdita connessione (fastweb) che continua a ripetersi costantemente anche questo pomeriggio?. Domani, in caso di mancata soluzione del problema, dovrei cambiare l'apparato. Quale dovrei scegliere per avere un ottimo range ed evitare il problema riscontrato con l'815. Grazie in anticipo e scusa il disturbo.

Pondera

L'ultimo è quello più appropriato in genere.

Per il tuo caso particolare credo tu intenda la connessione Fastweb e non il collegamento wireless. Nel qual caso presumo dipenda o da Fastweb o dall'HAG e il che esula dalle competenza del sottoscritto e di questo forum...

safesky66

Grazie comunque. Buona serata

Naturalmente davo per scontato dirvi che fino a ieri con il DIR-635 non esisteva nessun problema di disconnessione. Per cui non è fastweb ma un problema di compatibilità del DIR-815. Grazie

Pondera

Mai dare niente per scontato, già è difficile cercare di capire le vs. situazioni a distanza figuriamoci dando per scontato alcuni dettagli che possono stravolgere il senso delle descrizioni.

Che problema hai avuto col DIR-635?

Pondera

Pubblicata la versione del firmware 1.03 build 02 20121012 per la revisione hardware A1.
Esorto tutti ad aggiornare, specie gli utenti Fastweb!

albez

Citazione di: Pondera il 14 Novembre 2012, 08:12:15Pubblicata la versione del firmware 1.03 build 02 20121012 per la revisione hardware A1.
Esorto tutti ad aggiornare, specie gli utenti Fastweb!

Visto che a casa ho configurato tutto alla perfezione vorrei chiederti se facendo il banckup della configurazione posso ripristinarla sul nuovo fw o se ci sono delle attenzioni particolari in merito.

Questa sera quando tornerò a casa aggiornerò.

Graize mille!

Pondera

Di solito è sempre meglio resettare prima e dopo l'aggiornamento e poi rifare la configurazione (quindi è meglio segnarsi da qualche parte i parametri da impostare!).
Ma dato che il numero di versione resta lo stesso ma cambia il numero di creazione (build), cioé si tratta di una ricompilazione successiva aggiornata della stessa versione, non dovrebbero esserci problemi...

Pondera

Pubblicata la versione del firmware 2.02 build 01 20121113 per la revisione hardware B1.


DIR-815 Firmware Release Note



Firmware: FW v2.02
Hardware: Rev.B1
Date: 2012/11/13

Problems Resolved:
1. Remove 404 feature.
2. Fix issue that release button is not working when WAN SLAAC mode.
3. Fixed WLAN 5G MAC information issue in hidden page.
4. DS-lite does not connect automatically when user change IPv6 settings.
5. Add simple security option in IPv6 Firewall setting.
6. Fixed wrong status in wireless mode when STA connect to DUT with 802.11a.

Enhancements:

1. Enhance iOS 6 compatibility

Note:

N/A
---------------------- END ----------------------


Ricordo che i firmware per la revisione hardware B1 non sono retro compatibili con la revisione hardware A1.

P.S. Hidden page (pagina nascosta)?!?

Pondera

Pubblicato nel 1° messaggio di questa discussione nuovo firmware DIR-815 per revisione hardware A1 versione 1.04 build 02 con data 20130402.


DIR-815 Release Note

Firmware: DIR815A1_FW104b02.bin
Hardware: wrgnd08(rt3662+rt3090 dual band router)
Date: 2013/04/02

1. Fixed the multiple security vulnerabilities.


Firmware: DDIR815A1_FW103b02.bin
Hardware: wrgnd08(rt3662+rt3090 dual band router)
Date: 2013/01/18

1. Support manual year setting to 2037


Fonte D-Link IT
Aggiornamento Sicurezza Router

Sicurezza garantita per i router D-Link

Alcuni media hanno recentemente segnalato una vulnerabilità nella sicurezza dei router, includendo nel calderone anche i prodotti D-Link, ignorando che per l'azienda i temi della sicurezza e del buon funzionamento sono questioni di altissima priorità. D-Link pone infatti particolare attenzione in materia, curando l'aspetto della sicurezza dal processo di sviluppo e per tutto il ciclo di vita dei prodotti, sviluppando aggiornamenti firmware che rendano i prodotti compatibili con i nuovi standard vigenti in materia di sicurezza e qualità.
A garanzia di quanto sopra continueremo ad aggiornare questa pagina, a testare i nostri prodotti e produrre nuovi firmware per garantire che eventuali vulnerabilità vengano scoperte e risolte.
Di seguito alcune accortezze per evitare intrusioni nel vostro Router D-Link.

Email a cui non dare seguito
  • Se ricevete email indesiderate legate ai temi vulnerabilità e sicurezza che richiedono un'azione immediate, ignoratele! Cliccando sul link contenuto in questo tipo di email è probabile che autorizziate involontariamante un estraneo ad accedere al vostro router. D-Link o chi per essa non invierà mai email di questo genere, chiedendovi di installare nuovi software.
  • Accertatevi che la vostra connessione wireless sia protetta da password.
  • Disabilitare l'accesso da remote al vostro router (l'opzione è di norma attiva da subito nei router D-Link).

Aggiornamenti disponibili per i Router D-Link
I seguenti firmware risolvono le vulnerabilità segnalate in materia di sicurezza dei router. Raccomandiamo di installare gli aggiornamenti e garantiamo un continuo aggiornamento della pagina.
Poiché potrebbero esistere più versioni hardware di un singolo prodotto in commercio, preghiamo di controllare il numero di versione sul prodotto e poi di scaricare l'aggiornamento corrispondente. Il numero di versione hardware del prodotto si trova di norma sull'etichetta sotto/dietro il prodotto, accanto al numero di serie. In alternativa, la versione hardware è visibile anche nell'interfaccia web di installazione.
Una volta scaricato il file zip raccomandiamo di aprirlo e de-zippare i file in esso contenuti, per poterli installare correttamente.
[...]
DIR-815 Revisione Ax
29/04/13
Nuovo firmware 1.04b02
[...]
NOTA: all'interno della cartella compressa (ZIP file) troverete le istruzioni nel file TXT, che vi guideranno all'installazione.

qualcuno

Salve a tutti, ho il seguente problema:
possiedo due prodotti d-link, il primo utilizzato come router (modello DIR-815) e un DAP-1360 utilizzato come Client Wireless da cui parte il cavo ethernet per arrivare al my sky hd.

Ebbene il problema è che appena collego il dap 1360 la connessione va più che bene e funziona tutto. Dopo un tempo imprecisato (dalle 5 alle 20 ore) accade che non riesco più a collegarmi con il mio my sky hd tramite il dap 1360. Non riesco nemmeno a pingarlo dal pc. Se stacco l'alimentazione al dap 1360 e la riattacco funziona tutto, ma il problema si ripresenta.

Il firmware del dap è aggiornato all'ultima versione disponibile. Per di più ho provato ad utilizzarlo anche come repeater e il problema è equivalente.

Cosa mi consigliate di fare?

renzoma

Buonasera a tutti,
provo a scrivere per vedere se qualcun altro ha lo stesso mio problema e cioè questo:
il mio wisp ha cambiato il secondo DNS -- Server DNS secondario : xx.xx.xx.xxx (facoltativo)
vado a salvare la nuova impostazione ma esce un pop-uo con scritto TIPO DI INDIRIZZAMENTO IPV6 SCONOSCIUTO
non so dove sbattere la testa: le ho provate tutte (eccetto che reimpostare i dati di fabbrica e quindi riconfigurare il tutto)
il firmware l'ho sempre tirato giù da qui man mano che uscivo gli upgrade
sentito il wisp e loro dicono che dal lato loro è tutto ok
a nessuno risulta nulla?
ciao a tutti e buona serata

m4ss1

Ciao, come hai impostato la connessione wan?
Stai scrivendo l'indirizzo qui?

renzoma

ciao
mille grazie per l'interessamento
si esattamente: vado ad inserire in quella riga il nuovo dns
la modalità è quella di IP statico
ma quello che è strano è che anche se azzero il campo mi esce quel pop-up di errore

renzoma

ok risolto,
ho resettato l'apparato premendo il bottoncino sul retro del router e reinserito a mano i nuovi valori che questa volta mi ha accettato senza problemi
presumo che si sia "sporcata" la configurazione di accesso del router in quanto anche provando a switcharlo alla modalità IP dinamico usciva sempre quel dannato pop-up riportante tipo di indirizzamento ipv6 sconosciuto - senza tanti giri di parole avendo solo io accesso alla fine penso di essere io,,,,,,
non accettava più alcun comando, neanche l'azzeramento dei campi
i dati li ho inseriti manualmente e non utilizzando il file di configurazione generato dal router e salvato in locale in quanto, non so se ha torto o ragione, avevo paura che venisse clonato l'errore e di trovarmi sempre con quella segnalazione
sul desk-top
beh dai, tutto è bene quel che finisce bene e ricordarsi alla lettere che quel che funziona,,, mai metterci le mani
buon lunedì

Pondera

Pubblicato nel 1° messaggio di questa discussione nuovo firmware DIR-815 per revisione hardware A1 versione 1.04 build 03 con data 20130515.
Aggiornate le sezioni Documentazione e Supporto mondiale D-Link.
Sfoltiti i collegamenti ai firmware: lasciate le ultime edizioni (build) definitive (non beta).

1st Release Notes


DIR-815 Release Note
Firmware: DIR815A1_FW104b03.bin
Hardware: wrgnd08(rt3662+rt3090 dual band router)
Date: 2013/05/15
SVN: 36747..
1. Add router_info.xml for DCC can detect WAN link status(DCC bug,Fw workarround)

Firmware: DIR815A1_FW104b02.bin
Hardware: wrgnd08(rt3662+rt3090 dual band router)
Date: 2013/04/02
SVN: r35476
* Solve the security problem that curl -H "Cookie: uid=9gIdu6X6nF" -d "EVENT=%26%20telnetd%26" http://192.168.0.1/service.cgi would cause script injection issue to execute telentd.
* Reduce the logout timeout from ten to three minutes for D-Link request due to security consideration.
* Solve security problem that turn off the widget function and remove the relative files like router_info.xml.
* Solve security problem that don't let version.php show too much router information without authentication.
* Solve security problem that disable telnetd after the router is not longer factory default.
* Add authentication checking before getting configuration.
* Fix the ping ";reboot" will cause system reboot. we need do shell command escape before execute.

Firmware: DIR815A1_FW104b01.bin
Hardware: wrgnd08(rt3662+rt3090 dual band router)
Date: 2013/02/08
SVN: 34254.
1. Some files /htdocs/web/*.php could not access without authentication.

Firmware: DIR815A1_FW103b02.bin
Hardware: wrgnd08(rt3662+rt3090 dual band router)
Date: 2012/10/12
SVN: 31787.
2. Remove smart40 that fix iOS detect WISP error.
 NOTE: This model do not have setup wizard when factory default


Firmware: DIR815A1_FW103b01.bin
Hardware: wrgnd08(rt3662+rt3090 dual band router)
Date: 2012/03/09
SVN: 26389
3. Change band width default from HT20 to HT20/40 auto.
4. Formal release for lab-in.


Firmware: DIR815A1_FW102patch03b06.bin
Hardware: wrgnd08(rt3662+rt3090 dual band router)
Date: 2012/03/09
SVN: r26389(beta)
1. 1.remote access loopback issue.remove web server bind interface on wan interface.
2.virtual server and port forward loopback issue.the rule leak newline.

Firmware: DIR815A1_FW102patch02b06.bin
Hardware: wrgnd08(rt3662+rt3090 dual band router)
Date: 2012/02/23
SVN: beta
1. To fix a bug for that a strange STA(DWA-133) make us to calculate wrong data rate when coexistence function is enabled and we need to fall back to 20MHz.



Firmware: DIR815A1_FW102patch01b06.bin
Hardware: wrgnd08(rt3662+rt3090 dual band router)
Date: 2012/02/14
SVN: beta
1.when opening schedule menu with Safari browser, then the Safari displays a page with HTML script.
2. enable/disable QOS engine show some error message, the setting can not be saved.


Firmware: DIR815A1_FW102b06.bin
Hardware: wrgnd08(rt3662+rt3090 dual band router)
Date: 2012/01/19
SVN: 23156 + partial update + default enable pin lock and do some ui check.

1. Fix pin lock function fail after doing PBC success.

Firmware: DIR815A1_FW102b05.bin
Hardware: wrgnd08(rt3662+rt3090 dual band router)
Date: 2012/01/17
SVN: 23156 + partial update + default enable pin lock and do some ui check.

2. match dlink behavior.

Dlink spec:
No matter what interface does a Wi-Fi configuration come from (e.g. QRS, DCC, Web UI, PIN, PBC, reload config file¡K.etc), the following behaviors should be followed and taken into account.
A:  Unconfigure mode --> Configure mode, WPS-PIN Method should be disabled
B:  Configure mode --> Configure mode , WPS-PIN  method should be disabled
Take B for example, a router is wireless configured, and WPS PIN method is disabled by the system. A user enables PIN method manually, and then re-configure device's wi-fi, WPS PIN method should be once again disabled automatically when the change is applied.

Firmware: DIR815A1_FW102b03.bin/ DIR815A1_FW102b04.bin
Hardware: wrgnd08(rt3662+rt3090 dual band router)
Date: 2012/01/17
SVN: 23156 + partial update + default enable pin lock and do some ui check.
1. this version should be ignore.(have some issue.)

Firmware: DIR815A1_FW102b02.bin
Hardware: wrgnd08(rt3662+rt3090 dual band router)
Date: 2012/01/16
SVN: 23156 + partial update + default enable pin lock and do some ui check.

1.When user WPS is configured after upgrade new F/W ,the PIN lock should be enabled.


Firmware: DIR815A1_FW102b01.bin
Hardware: wrgnd08(rt3662+rt3090 dual band router)
Date: 2012/01/13
SVN: 23156 + partial update

1.WPS pin lock from dlink request.

NOTE: base on 1.01b14 (svn 23156) and update pin lock issue needed
file :
   svn up progs.priv/hostapd_wps (rev 25793).
   svn up boards/wrgnd08/template.aries/services/hostapd_0_5_9_hostapd_wps/
   WIFI/wpsset.php(rev 25793).
   Svn up templates/aries/progs/htdocs/hnap/[ SetWLanSettings24.php SetWLanSecurity.php  SetWLanRadioSettings.php SetWLanSettings54.php SetWLanRadioSecurity.php ]
  
    
  



Firmware: DIR815A1_FW101b14_ patch03.bin
Hardware: wrgnd08(rt3662+rt3090 dual band router)
Date: 2011/12/7
SVN: 25551

1. Fix DHCP reservation issue.

Firmware: DIR815A1_FW101b14_ patch02.bin
Hardware: wrgnd08(rt3662+rt3090 dual band router)
Date: 2011/08/3
SVN: 24470

1. After the PPP on demand mode idle timeout trigger IP down, the LAN PC can't trigger PPP dial via broswer. Web will show 404 error page.

Firmware: DIR815A1_FW101b14_ patch01.bin
Hardware: wrgnd08(rt3662+rt3090 dual band router)
Date: 2011/07/29
SVN: 24368

Fixed bug reported by OBU EU
2. After setup the PPPoE connection over Setup Wizard the Reconnect Mode is Always on.Please set to On demand and the Maximum Idle Time to 5 minutes.
3. It is not possible to set the DHCP Server range to offer only one IP, e.g. range = 22 – 22 Else I get the error message that the Start IP address has to be shorter than the End IP address.
4. Remote Management doesn't work when try to connect with DynDNS address.
5. After setup the PPPoE internet connection over the DCC the Reconnect Mode is On demand
6. Language Pack issues(extend language mtd size to 128K,and merge IPV6 string from DIR-645)


Firmware: DIR815A1_FW101b14.bin
Hardware: wrgnd08(rt3662+rt3090 dual band router)
Date: 2011/05/12
SVN: 23156

7. Fix ipv6 wizard issue with static ip.
8. Fix ipv6 autodetect bug and static have two ip issue.

Firmware: DIR815A1_FW101b13.bin
Hardware: wrgnd08(rt3662+rt3090 dual band router)
Date: 2011/05/11
SVN: 23114

1. SLACC &DHCPv6 rdnss, PC can not get ip.
2. Fix issue that user can set link-local address in LAN.

Firmware: DIR815A1_FW101b12.bin
Hardware: wrgnd08(rt3662+rt3090 dual band router)
Date: 2011/05/10
SVN: 23094

1. PPPoE shared mode PC can not get ip.
2. Wizard cannot work.

Firmware: DIR815A1_FW101b11.bin
Hardware: wrgnd08(rt3662+rt3090 dual band router)
Date: 2011/05/06
SVN: 23046

3. Fix error checking on IPv6 page.

Firmware: DIR815A1_FW101b10.bin
Hardware: wrgnd08(rt3662+rt3090 dual band router)
Date: 2011/05/06
SVN: 23038

4. Update setting page about IPv6 follow DLINK spec.

Firmware: DIR815A1_FW101b09.bin
Hardware: wrgnd08(rt3662+rt3090 dual band router)
Date: 2011/04/22
SVN: 22708

1.Follow DLINK F/W naming rule.
2. Add RUSSIA pptp and RUSSIA pppoe back
3. fix 404 error page contrack cache issue.



Firmware: dir815_v1.01b08_patch01_b4fb_beta.bin (Beta to support)
Hardware: wrgnd08(rt3662+rt3090 dual band router)
Date: 2011/04/15
SVN: 22522

1. Beta to support to fix bug pptp server ip address can't enter more than 15 character
///////////////////////////////////////////////////////////////////////////////////////////////////////////////
///////////////////////////////////////////////////////////////////////////////////////////////////////////////
Firmware: dir815_v1.01b08_patch01_b3se.bin (Beta to support)
Hardware: wrgnd08(rt3662+rt3090 dual band router)
Date: 2011/03/28
SVN: 22320

1. Fix bug: When port scanning on port 0 and 1 in PPPOE mode, our status is CLOSED instead of STEALTH

Firmware: dir815_v1.01b07_b2pg.bin
Hardware: wrgnd08(rt3662+rt3090 dual band router)
Date: 2011/02/25
SVN: 21803

1. Add syslog feature.

Firmware: dir815_v1.01b06_b1qi.bin
Hardware: wrgnd08(rt3662+rt3090 dual band router)
Date: 2011/01/26
SVN: 21516.

2. Fix : pptp l2tp not work with some servers
3. Fix : UPnP messages cannot be handled correctly when smart404 is enabled
4. Fix : google browser can't upload language pack

Firmware: dir815_v1.01b05_abia.bin
Hardware: wrgnd08(rt3662+rt3090 dual band router)
Date: 2010/11/18
SVN: 19506.

1. The 2.4G mac as wan mac.Let the 5G and 2.4G have different mac.
2. Fix the PS3 dhcp client cause the dhcp server panic.



Firmware: dir815_v1.01b04_abch.bin
Hardware: wrgnd08(rt3662+rt3090 dual band router)
Date: 2010/11/12
SVN: 19408.

1. Fix wlan 5g led error.(also issue on previous version No,345)
2. Correct 404 error page style(No.347)
3. The NETWORKING PAGE will error when the LAN PC have wide character hostname.
4. WAN dhcp mode fail with ZIPB adsl modem.
5. Port forwarding rule fallow DLINK US request.
6. UPNP IGD sometimes function fail.(No.350)
7. Remove the Russia PPTP and PPPoE ,that dlink PP request.
8. Do not save password when the config backup(dlink request).
Buglist fixed:
No: 351,334,320,319,318,317,239

Firmware: dir815_v1.01b03_ab1k.bin
Hardware: wrgnd08(rt3662+rt3090 dual band router)
Date: 2010/11/01
SVN: 19127.

9. Fix wlan 5g led error.
10. Add smart 404 function.
11. Fix web bug no.1,6,7 from US DLink.( "DIR-815 A1 1.00 A7EE" file).
12. Add radius server default port.
13. Fix hnap bug for DCC.
IPv6
14. Support IPv6 DNS and resolv.
15. Add 6rd-relay_prefix in 6rd command.
16. Set global ipv6 address to ppp interface.


Firmware: dir815_v1.01_a8pe.bin
Hardware: wrgnd08(rt3662+rt3090 dual band router)
Date: 2010/08/25
SVN: 17965.

1. TCP mss adjust fail.(the fast net cause this issue)
2. Fix the ppp dial on demand function fail.(a8kf fix NO.8 side effect)

Reject issue:
1. The wireless IOT issue with Atheros chips [DWA-645] ==> is normal in RD side test.



Firmware: dir815_v1.01_a8kf.bin
Hardware: wrgnd08(rt3662+rt3090 dual band router)
Date: 2010/08/20
SVN: 17870.

Note: Change version from 1.00 to 1.01

2. Fix the bt 100M test.(enable Fastnat)
3. manual dns entry doesn't work.
4. cannot remove ip of lan when changing mode from 6rd to others.
5. press wps, disable wifi, wps light still blinks. after win7 (upnp), wps light doesn't blink.
6. Redirect the blocket website to blacked information page.
7. Fix the UI that can not be selected tkip when n only mode.
8. Fix sometime the forward is error when ip up.(lan PC continue ping ,change the wan ip ,sometime the ping response will fail.)
9. Clone PC's MAC address in DHCP mode failed at Internet Wizard.
10. add Firmware External Revision : V1.01bxx in hidden page



Firmware: dir815_v1.00_a86b.bin
Hardware: wrgnd08(rt3662+rt3090 dual band router)
Date: 2010/08/06
SVN: XXXX
////////////////////////////////////////////////////////////////////////////////////////////////////////////////
Fix:
1. Fix 6rd and 6to4 tunnel can not works because leak firewall accept rule.
2. Fix the default time zone as +8:00 taipei

Firmware: dir815_v1.00_a83m.bin
Hardware: wrgnd08(rt3662+rt3090 dual band router)
Date: 2010/08/03
SVN: 17412

Fix:
3. LAN page can't save setting.
4. Wlan page can't disable 2.4G & 5G mode.
5. 2.4G N-only WPA2-PSK-AES Chaiort Test RXtoLAN will Disconnect(No299).
6. Hidden page bug about language package.
7. Helpful hints have some error word from lab.

Firmware: dir815_v1.00_a7uh.bin
Hardware: wrgnd08(rt3662+rt3090 dual band router)
Date: 2010/07/30
SVN: 17317

Fix:
1. Remove the ap mode support.
2. The 160A2 atheros chipset low throught put issue.
 

From US issue:
Fixed:
1. Typo - When using PIN, it shouldn't show users "press down the push button"(No1)
2. If you click "Link to log settings", it will link you to "email settings"(No6)
3. Wireless bandwidth and mode should be on the "wireless settings" page(No7)
4.
Not duplicated
1. Ping test on web UI – Cannot ping 192.168.0.102(XXXXX)(No2)
2. Wireless – can go up to 130 Mbps only(No5)
3. The Throughput of the WLAN to LAN on 2.4 GHz are low(No8)
4. The throughput of the 100Mbps Full duplex and Auto on WAN to LAN are low.(No9)



Reject:
1. Web Filter – When allowing computer access to those websites, it takes a long time and still can't load the page. (No3)
2. Port Forwarding - The list is wrong (No4 ,fix in next phase.)
3. Wireless Security – Cannot connect n only with TKIP on WPA/WPA2.(No10 ,???UI??.)

From LAB:
Bugs Fixed
1. [Wireless] [WEP]DUT wireless security mode ?shared key ?, ?????open???????(No280)
2.  [WPS] WCN via vista/win 7 fail.(NO268)
3.  [WAN] Russia-WAN ??????, ?PPP WAN????, default gateway ??physical WAN, ?physical WAN????.PPP ???, default gateway ???Public PPP WAN(No264).
4.  [HW] ??WPS ??,disable WPS/disable Wireless, LED?????????(No253)
5.  [HW]??WIN7 WCN??wireless, ???WPS LED???(No172)
6.  [Wireless] 5G N-Only WPA2-PSK-AES ? dwa-160a2 ?? time out ??? ping ?? RG(No166)
7.  [HW] ??WPS ??,??wireless ??, LED?????(No41)
8. Charoit Test radius server Throughput will time out (same as bug 166 No273)
9.  [WPS] wireless ???wps(push button)?????????, wps wizard\manual ??????(No270)
10.  [Wireless Wizard] ????wireless security 64??????hex?? ??????(??error message)(No267)
11.  [Schedule] ???????????????, ???????????.(No263, 251 )
12.  [Log]Log ???400?(No224)
13.  [Wireless] Wireless wizard,???2.4/5GHz security password, ?????error message, ?????(No217)
14.  [Log] Log full ????log type ????(No215)
15.  [WPS] WPS Wizard\Manual, ?security ?shared????WEP Key(No214)
16.  [Help][Port Forwarding] Virtual Server??????Port Forwarding.(No137)
17.  [Help][Virtural Server] 815??Access control?function, ???help??.(No136)
18.  [Help][Network Settings] ????"local domain name"???.(No135)
19.  [Wireless] ??country code?wireless channel ??spec (???X??)(No134)
20.  [Log]????log type???UI??(No130)
21.  [Firewall] Firewall rule can input 192.168.0.0100, and dut can't pop-up warning message.( No113)
 
 
 
Bugs Rejected
1. [AP Mode] AP Mode ?????MAC ?device info??????(No support ap mode)(No247)
2.  [Wireless] In AP mode, STATUS\WIRELESS won't show clients' IP.     (No support ap mode)(No229)
3.  [WPS] WPS???2.4G?5G?SSID????dlink + MAC???. ??2.4G?5G?SSID??.   (No support ap mode)(No225)
4.  [Wireless] ??????, disable wireless function re-enable?. UI ???????????. (UI design)( No218)
5.  [QoS][AP Mode]?AP Mode?,QoS??,??????Enable QoS??.     (No support ap mode) (No212)
6.  [Firewall] When firewall rule have not select interface,can input 192.168.0.0 / 192.168.0.255 / 192.168.0.1. dut can't pop-up warning message. (UI design, doesn't need too much prevention for advanced users)(No114)

Know issue:
100Mbps bt test fail



Firmware: dir815_v1.00_a7ee.bin
Hardware: wrgnd08(rt3662+rt3090 dual band router)
Date: 2010/07/14
SVN: 16981

1. Change the netbois name from model name (DIR-815) to dlinkrouter according dlink spec.
2. Disable fast net that cause Bt test crash.
3.After factory reset, we do wps and success, but the web isn't updated to "success". The web only keep counting untill endtime.(bug 271).

Firmware: dir815_v1.00_a78h.bin
Hardware: wrgnd08(rt3662+rt3090 dual band router)
Date: 2010/07/8
SVN: 16884

1. WPS profile content error when AP is unconfigured.
2. Country Can be set AS EU.( For EU we recommand set to GB)


Firmware: dir815_v1.00_a77e.bin
Hardware: wrgnd08(rt3662+rt3090 dual band router)
Date: 2010/07/7
SVN: 16853

3. WPS fail with dlink utility.
4. PPTP hard to dial to WDS pptp server.(also solve some CD router problem.)
5. RUSSIA PPTP phy interface do not work.
6. Xbox360 WPA2 can not connect to AP.
Know Issue:
1. DWA 160A2  throughput test fail.


 
Firmware: dir815_v1.00_a71h.bin
Hardware: wrgnd08(rt3662+rt3090 dual band router)
Date: 2010/07/1
SVN: 16763.

7. Iintel utility WPS setup will error issue.
8. ipfilter ipv6 igmp filter fail.
9. URL filter ui error.
10. language pack upgrade error.
11. QRS Wireless setting bug and Some wan setting error.
12. DCC Wireless setting bug and Some wan setting error.
13. Change URL filter, mac filter default as turn off.
14. Device will panic when receive 1Q packet.(bug 228)

Other buglist:
243,240,230,193,228,227,226
Reject:223,213,129,127,125
Change priority:198,237--->3


Firmware: dir815_v1.00_a6ni.bin
Hardware: wrgnd08(rt3662+rt3090 dual band router)
Date: 2010/06/23
SVN: 16609.

1.remove the easy setup.
2.2.4G wep key index 2 ,3,4 not work.
3.support the WIN7 logo test.
4.fix the QOS bandwidth detection cause panic when restart wireless.

Firmware: dir815_v1.00_a6mb.bin
Hardware: wrgnd08(rt3662+rt3090 dual band router)
Date: 2010/06/22
SVN: .

1.Fix th UI can not dial up when pppoe manual mode.

Firmware: dir815_v1.00_a6ii.bin
Hardware: wrgnd08(rt3662+rt3090 dual band router)
Date: 2010/06/18
SVN: 16539.

1. Fix the wan mac clone will cause kernel panic.

Buglist:
207,205,200,196,195,194,192,191,190,188,187,186,185,184,182,181,180,179,175,170,171,167,165,164,162,161,160,159,157,156,154,151,150,149,148,145,144,143,141,139, ,103,96,94,93,92,91,90,88,87,86,85,84,81,80,79,78,75,64,63,
Reject:
183,176,168,152,32


Firmware: dir815_v1.00_a5rb.bin
Hardware: wrgnd08(rt3662+rt3090 dual band router)
Date: 2010/05/27
SVN: 15995

1. Fix the wireless max entry will cause device crash.
2. Fix the mfc force run ht40.

Firmware: dir815_v1.00_a5oi.bin
Hardware: wrgnd08(rt3662+rt3090 dual band router)
Date: 2010/05/24
SVN: 15917

1. Fix all of the wireless setting will error!


Firmware: dir815_v1.00_a5li.bin
Hardware: wrgnd08(rt3662+rt3090 dual band router)
Date: 2010/05/21
SVN: 15885

Buglist:
1,2,3,4,5,6,7,8,10,11,12,13,14,15,17,18,19,21,22,23,25,26,27,28,29,30,33,34,35,37,38,40,41,42,43,44,45,46,47,48,49,50,51,52,54,55,56,57,58,59,60,61,62,65,67,68,69,70,83,95,100,102,105,107,112,118
Reject:
36,39,76,99,106

NOTE :The kernel have upgrade to 2.6.33.Main function need to test again.


Firmware: dir815_v1.00_a4rl.bin
Hardware: wrgnd08(rt3662+rt3090 dual band router)
Date: 2010/04/27
SVN: 15354
1.Add ipv6 that can be test.

Known issue :
Wps pbc overlap on a and g band.

Firmware: dir815_v1.00_a4lf.bin
Hardware: wrgnd08(rt3662+rt3090 dual band router)
Date: 2010/04/22
SVN: 14647
1. First release for lab in.




2nd Release Note


DIR-815 Firmware Release Notes

Firmware: FW 1.04.B03
Hardware: A1
Date: 2014/09/04

Note:
None

Problems Resolved:
1. Resolve security issue

Enhancements:
None

Known Issues:
None



Firmware: FW 1.04.B02
Hardware: A1
Date: 2013/07/30

Note:
None

Problems Resolved:
1. Fixed WLAN 5G LED behavior
2. Fixed Clone MAC address issue in DHCP mode
3. Enhanced performance

Enhancements:
None

Known Issues:
None

Pondera

Pubblicato nel 1° messaggio di questa discussione nuovo firmware DIR-815 per revisione hardware B1 versione 2.03 build 08 con data 20130806.


DIR-815B Release Note
Firmware: DIR815B_FW203b08.bin
Hardware: wrgnd12 (rt3352 + rt3572 )
Build no: d86i
SVN : r 39497.
Date: 2013/08/06

1. Fix bt stress test fail when enable anti-spoof.

Firmware: DIR815B_FW203b07.bin
Hardware: wrgnd12 (rt3352 + rt3572 )
Build no: d5hb
SVN : r 36730.
Date: 2013/05/17

1. Security : HNAP GetWLanRadios should authenication.

irmware: DIR815B_FW203b06.bin
Hardware: wrgnd12 (rt3352 + rt3572 )
Build no: d5ff
SVN : r 36730.
Date: 2013/05/15

1. 1. Add router_info.xml for DCC can detect WAN link status(DCC bug,Fw workarround)


Firmware: DIR815B_FW203b05.bin
Hardware: wrgnd12 (rt3352 + rt3572 )
Build no: d4mg
SVN : r36110.
Date: 2013/04/22

1.If there is no cookie contains the key words with "uid=", it would generate a cookie for authentication.(bug :if broswer already have cookie,It will login fail.)

Firmware: DIR815B_FW203b04.bin
Hardware: wrgnd12 (rt3352 + rt3572 )
Build no: d4mc
SVN : r36099.
Date: 2013/04/22

1. In b03 the Device info page will show wrong 5g mac.
2. Chanhe 5g mac = 2.4g mac + 255 (mac byte4 + 1 )


Firmware: DIR815B_FW203b03.bin(Beta)
Hardware: wrgnd12 (rt3352 + rt3572 )
Build no: d4jf
SVN : 36071.
Date: 2013/04/19

1. change 5G mac to lan mac + 2,because iPAD/iphone5 (abgn wifi) is hard to connect to AP.When concurrent dual band AP using same 5g and 2.4g mac, iOS with abgn wifi will connect fail.

Firmware: DIR815B_FW203b02.bin
Hardware: wrgnd12 (rt3352 + rt3572 )
Build no: d4ae
SVN :35705
Date: 2013/04/10

1. Solve the security problem that curl -H "Cookie: uid=9gIdu6X6nF" -d "EVENT=%26%20telnetd%26" http://192.168.0.1/service.cgi would cause script injection issue to execute telentd.
2. Reduce the logout timeout from ten to three minutes for D-Link request due to security consideration.
3. Solve security problem that turn off the widget function and remove the relative files like router_info.xml.
4. Solve security problem that don't let version.php show too many router information without authentication.
5. Solve security problem that disable telnetd after the router is not longer factory default.

Firmware: DIR815B_FW203b01.bin
Hardware: wrgnd12 (rt3352 + rt3572 )
Build no: d12f
SVN : 33340
Date: 2013/01/02

1. fix upnp notify fail (modify argument check number)
2. patch coexist HT20/40 fallback to ht20, DUT also set to HT20 not HT40

Firmware: DIR815B_FW202b02.bin
Hardware: wrgnd12 (rt3352 + rt3572 )
Build no:
SVN : 28936 partial r31781
progs.gpl/mathopd-1.6/sources/mathopd-1.6b9.tar.gz.alpha.diff templates/aries/progs/events/update_smart404.php templates/aries/progs/htdocs/smart404/index.php
templates/aries/progs/scripts/dbsave.sh
Date: 2012/11/8

1.Base on shipping version (2.01b02) update remove smart404 and apple issue (see 2.01b03 no. 2).

Firmware: DIR815B_FW202b01.bin
Hardware: wrgnd12 (rt3352 + rt3572 )
Build no: catf
SVN : 31781
Date: 2012/10/29

1. On ly change the version from 2.01b03 to 2.02b01.(Dlink request)

Firmware: DIR815B_FW201b03.bin
Hardware: wrgnd12 (rt3352 + rt3572 )
Build no: cabg
SVN : 31781
Date: 2012/10/11
1. remove smart 404.
2. skil http user-agent CaptiveNetworkSupport that is apple (ipad iphone ) detect wisp.we do not response 302.if response 302 apple device will redirect to WEB to config wisp.We do not want this behavior.
3. Fix issue that change ppp6 setting (ex:dns) may change IPv4 connection mode.
4. Modified for Disable checkboxes of IPv6 DDNS List when IPv6 is not Enable.
5. Add Simple Security regarding sysfrag attack.
6. Change log level of "received RA ..." to debug level.(log display error RA message.)
7. Fix issue that release button is not working when WAN is SLAAC mode.
8. Fixed for user can input max 30 chars in domain at PPTP/L2TP.
9. Fix issue that ntp6 can't work.
10. Fix issue that guest zone can't get ipv6 address.
11. Fix issue that set dns manually in ppp10(ipv6 ppp share with ipv4 ppp) can't work. (Not save to resolv.conf)

Firmware: DIR815B_FW201b02.bin
Hardware: wrgnd12 (rt3352 + rt3572 )
Build no: c6pi
SVN : 28936
Date: 2012/06/25
1. Fix iOS can not access "dlinkrouter" on browser.
2. Can pass UNH-IOL 1.00b06 test plan


Firmware: DIR815B_FW201b01.bin
Hardware: wrgnd12 (rt3352 + rt3572 )
Build no: c6li
SVN : 28897
Date: 2012/06/22

1.[DS-Lite]DS-lite does not connect automatically when user change IPv6 settings.[B200]"
2.Wizardv6 UI detection time is not enough.[B211]
3.[IPv6][Autodetection]WANv6 get no default gateway.[B212]
4.[IPv6][Autodetection] Autodetection setup 5 is failed, DUT cannot get IPv6.[B210]
5.[IPv6][PPPoE shared with IPv4] Reconnection mode PPPoEv4 is not the same settings with PPPoEv6.[B205]
6.[IPv6][PPPoE] DNSv6 cannot be set. [B203]
7.[IPv6 Firewall] The firewall website does not have simple security option.[B162]
8.WPS wizard won't work when only one band is not in schedule.[B199]
9.When wan uses l2tp / pptp on demand mode, wan can trigger get ip but web site will redirect to normal error page. [B105]
10.Web wizard set russia pppoe, mtu is 1400. but default should be 1492. [B193]
11.Web wizard set russia pppoe can not connection and count down over, open dlink webpage failed. [B208]
12.Wizard of wi-fi ssid and password can input all blank, ssid can scan but can not connection. manual setup could not be blank. [B196]
13.Wireless mode is wrong when STA connect DUT with 802.11a.[B170]
14.fix hidden page should show wlan 5g mac.

Firmware: DIR815B_FW200b12.bin
Hardware: wrgnd12 (rt3352 + rt3572 )
Build no: c43g
SVN : r26928
Date: 2012/04/03

1. Fix QRS tool sometime work abnormal.
2. Fix Opendns utility always login fail.
3. Extend wait time to connect to dlink website after wizard setup complete to avoid sometimes connect fail.

Firmware: DIR815B_FW200b11.bin
Hardware: wrgnd12 (rt3352 + rt3572 )
Build no: c42j
SVN : r26914
Date: 2012/04/02

4. Fix the bt stress issue.But need confirm the iefi throughput is not inpact.(RD side test ,it seem find)
5. Change default value a.igmp v4 enable to disable. Bdhcp server broadcast enabled.c.https server disabled.
6. Fix HNAP tool test issue.
4.[IPv6] [Autodetection] When set WAN to autodetection, DUT will run in loop. DUT cannot factory reset


Firmware: DIR815B_FW200b10.bin
Hardware: wrgnd12 (rt3352 + rt3572 )
Build no:
SVN :
Date: 2012/03/27

1. Improve DWA645 and 160A2 low throughput issue.
2. Fix guest zone schedule issue.
3. WPS pin lock issue.(5G lock fail if 24G is locked.)


Firmware: DIR815B_FW200b09.bin
Hardware: wrgnd12 (rt3352 + rt3572 )
Build no: c3fg
SVN : r26659
Date: 2012/03/23

1. remove account "USER".
2. Change the UI "ADMIN" to "Admin"
3. Fix IPV6 bug reported on bug tracker.
4. About throughput issue, we need more time to check it.



Firmware: DIR815B_FW200b08.bin
Hardware: wrgnd12 (rt3352 + rt3572 )
Build no: c3fg
SVN : r26523
Date: 2012/03/15

1. About throughput issue, please re-test with this F/W.
RD side can not duplicate low throughput issue.

2.CD-router IGMP test fial on pppoe mode.
3. Change wireless and then change WAN mode settings will make wireless 5GHz channel error.
4. No drop-down list by right clicking on DUT icon in IPV6 only(IPV6 IGD).
5. Others follow bug tracker.


Firmware: DIR815B_FW200b07.bin
Hardware: wrgnd12 (rt3352 + rt3572 )
Build no: a2ac
Date: 2012/02/10

1. add wps pin lock isuue.
2. Others follow bug tracker.


Firmware: DIR815B_FW200b06.bin
Hardware: wrgnd12 (rt3352 + rt3572 )
Build no: bach
Date: 2011/10/12

1.runtime disable ipsec pass through will cause system panic
Others follow bug tracker.

Firmware: DIR815B_FW200b05.bin
Hardware: wrgnd12 (rt3352 + rt3572 )
Build no: b8qi
Date: 2011/08/26

1.after run web wizard,the pppoe should dial on demand with idle time 5 minutes.
2.default enable alg.(pptp,l2tp,ipsec,sip)
3.enable bonjour(http service) by default.
4.add pptp acceleration,
5.fix the igmp/mld multi-client fail issue.
6.fix sometime system do not reboot after f/w upgrade .
7.modify hostapd for wps2.0 logo.
8.fix the upnp should show info following dlink request.
9.correc the model name is DIR-815 not DIR-815B
10.Sometime webserver crash.
11.fix the win7 logo upnp packet count test fail issue.




Firmware: DIR815B_FW200b04.bin
Hardware: wrgnd12 (rt3352 + rt3572 )
Build no: b8ci
Date: 2011/08/12

1. Upgrade Wifi 5G driver from 2.5.0.2 rev1 to rev2 to support DFS feature.
2. Add new feature - ALPHA_MFC_CACHE_EEFLASH - for wireless driver to skip the number of flash write operation. It can save much time when do manufactory  test.

Known issue: DFS function fail. It will detect non-dfs channels as dfs channel.

Firmware: DIR815B_FW200b03.zip
Hardware: wrgnd12 (rt3352 + rt3572 )
Build no: b7dk
Date: 2011/07/13

3. Third release of dir815b.
4. HW_NAT driver upgrade from 0.91 to 0.92 to fix IPv6's PPPoE can not acceleration issue.
5. Wireless 2.4G driver upgrade from 2.5.0.4 to 2.5.0.6 to fix H/W BBP R3 initial value
6. Wifi 5G driver will be updated later. Please postpone wifi 5G related test.

Firmware: DIR815B_FW200b02.zip
Hardware: wrgnd12 (rt3352 + rt3572 )
Build no: b71i
Date: 2011/07/1

7. Secondary release of dir815b.
8. Wifi 5G driver will be updated later. Please postpone wifi 5G related test.

Firmware: DIR815B_FW100b01.zip
Boot loader firmware: WRG-ND12_svn544.uboot.img.zip
Hardware: wrgnd12 (rt3352 + rt3572 )
Date: 2011/06/14

9. First release of dir815b.
10. Wifi 5G driver will be updated later. Please postpone wifi 5G related test.



DIR-815 Firmware Release Notes

Firmware: FW v2.03
Hardware: Rev.B1
Date: 2013/07/31

Problems Resolved:
1. Resolve security vulnerabilities.
2. Fix UPnP notify issue.
3. Fix coexist HT20/40 issue.

Enhancements:

Note:
N/A

---------------------- END ----------------------


Tolti tutti i collegamenti ai firmware precedenti.

oraziotes

Salve a tutti ho un problema nel configurare il mio Dir-815. Dovrei collegarlo ad un modem-router netgear perché devo ampliare il segnale della mia ADSL Infostrada. Il problema che mi si presenta è che una volta fatti i vari collegamenti, ovvero cavo ethernet da uscita lan del netgear ad ingresso internet del dlink e aver seguito passo passo tutte le indicazioni del cd, nel momento in cui mi va a rilevare la connessione internet mi visualizza un errore " verificare la connessione cable/dsl e controllare le configurazioni delle connessioni ad internet" (il messaggio grosso modo questo era). Vorrei sapere cosa dovrei fare per risolvere questo problema! sono molti giorni che ci sto perdendo la testa, complice anche il fatto che non sono tanto capace in queste cose.
 :-/

Licenza Creative Commons
Il contenuto dei messaggi del forum è distribuito con
Licenza Creative Commons Attribuzione Non commerciale 4.0
Tutti i marchi registrati citati appartengono ai legittimi proprietari