Aperto da Pondera, 25 Ottobre 2013, 09:49:25
Batterie compatibiliFUJI:NP-40/NP-60/NP-120/NP-95;Samsung:SLB-0737/SLB-0837/SLB-1037/SLB-1137;Olympus:LI-20B;Casio:NP-30;Panasonic:S004E;Kodak:KLIC-5000/KLIC-5001/KLIC-7005;Ricoh:DB-40/DB-43;Sanyo:DB-L50A;Kyocera:BP-1500S;Pentax:D-LI2/D-LI7/D-LI8; Dispositivi compatibiliFujifilm FinePix SeriesFinePix 603, FinePix M603, FinePix M603 Zoom, FinePix F10, FinePix F11, FinePix F10 Zoom, FinePix F11 ZoomCONTAXContax Tvs DigitalPENTAXPentax Optio 450, Pentax Optio 550,Pentax Optio 555, Pentax Optio 750, Pentax Optio 750Z, Pentax Optio MX, Pentax Optio MX4RICOHRicoh Caplio GX, Ricoh Caplio GX8, Ricoh Caplio R330, Ricoh Caplio RR10, Ricoh Caplio RR30, Ricoh Caplio RX, Ricoh Caplio 300G, Ricoh Caplio 400G wide, Ricoh Caplio 500G, Ricoh Caplio 500G wide, Ricoh Caplio 500SERicoh Caplio G3 SeriesCaplio G3, Caplio G3S, Caplio Pro G3, Caplio G3 model M, Caplio G3 model SRicoh Caplio G4 SeriesCaplio G4, Caplio G4wide
Citazione di: 240Tino282 il 25 Febbraio 2014, 12:33:29in particolare una ZTE K3806-Z (ufficialmente supportata)
Citazione di: m4ss1 il 25 Febbraio 2014, 21:53:33Citazione di: 240Tino282 il 25 Febbraio 2014, 12:33:29in particolare una ZTE K3806-Z (ufficialmente supportata)Ciao, versione hardware e firmware del DIR-506L?SIM Vodafone?
Citazione di: m4ss1 il 26 Febbraio 2014, 12:43:00L'errore è normale perchè non è connesso ad internet, metti la sim in un cellulare e prova a disattivare il pin.La ZTE funziona con il pc? Quando la metti nel router di che colore è il led?
Citazione di: 240Tino282 il 26 Febbraio 2014, 23:23:03la finestra del "countdown" è scritta in cinese?!?!?!?!?!
Citazione di: m4ss1 il 27 Febbraio 2014, 11:49:34Citazione di: 240Tino282 il 26 Febbraio 2014, 23:23:03la finestra del "countdown" è scritta in cinese?!?!?!?!?!Non preoccuparti hanno sicuramente dimenticato di tradurla...
Citazione di: Pondera il 31 Marzo 2014, 10:21:42@240Tino282Aggiorna all'ultimo firmware per la tua revisione hardware consigliato in evidenza nel 1° messaggio di questa discussione.
2012.08.10V2.11(EU)b01_R0.01c0New changes:1-Fixes: DIR-506L can't work with new iOS Shareport APP(220.127.116.11)2-Fixes: When DIR-506L is configured as WAN WiFi-Hotspot and the AP LAN IP is 192.168.1.0/24, the LAN/Wireless clients will not be able to connect to internet.3-Fixes: Avoid the files on USB device damaging or losing.4-New Feature: Modify the login page.5-New Feature: Modify WiFi-Hotspot WiFi password word.6-New Feature: Display WiFi-Hotspot AP SSID on Status page.7-New Feature: Disable ""Press WPS button to disable WiFi OFF"" feature.2012.08.17V2.11(EU)b02_R0.01c0New changes:1-Fixes: Can't display category files with NTFS format USB device.2-Fixes: Change DIR-506L's wireless encryption mode but will cause WAN WiFi-Hotspot can't reconnect after rebooting.3-Fixes: After establishing WiFi-Hotspot connection, Status page can't display default gateway information.4-New Feature: QRS APP can't detect WAN PPPoE type.2012.08.31V2.11(EU)b03_R0.01c0New changes:1-New Feature: Based on V2.11(EU)b02, implement the default settings below:· Default WiFi SSID "dlink_DIR-506L"· Default Password "0266000123"· Logon Details (192.168.0.1 or http://dlinkrouter.local)· UI User Name "admin"· UI Password "leave this blank"2012.09.05V2.12(EU)b01_R0.01c0New changes:1-New Feature: Extend Login PASSWORD length from 8 to 16.2-Fixes: After I have saved my Inbound filter settings then the UI jumps to the Outbound filter setup.3-Fixes: When UI language is German and the DIR-506L restarts then the restart window is in Chinese.2012.10.17V2.12(EU)b02_R0.01h0New changes:1. AP and Repeater Mode Status issue: When the DIR-506L is connected to the root WLAN router it gets IP from this root WLAN router. But in Status -> Device Info there will still displayed the 192.168.0.1 as the device IP, but the device has e.g. 192.168.0.100. [Solution]: Update the correct status to device information page when APconnection or Repeater connection is established.2. AP and Repeater setup Not working features: In AP and Repeater Mode the DIR-506L has Remote Management, NTP and DynDNS function. But they don't work. [Solution]: Remove Remote Management/NTP/DynDNS functions in AP only and Repeater mode.3. All Mode Unique SSID request.[Solution]: For the new FW, the SSID will become DIR506L-WXYZ(??), while WXYZ is the last 4 characters of each LAN MAC. 4. Repeater Mode SSID request: Follow DIR-505 design in the next release.[Solution]: There are two modes to configure DIR-506L SSID: ""Same as WiFi Network Name"" or ""Create A New WiFi Network Name"". And if Repeater connection is connected, DIR-506L will bridge IP address to wireless clients, but if Repeater connection fails to be established , DIR-506L will enable DHCP function and then assign IP address 192.168.0.0/24 to wireless clients.5. All Modes UI change: When the customer logs into the User Interface he lands on the "STATUS" screen the customer should land on the "SETUP" screen by default.[Solution]: Land on the "SETUP" screen by default.6. AP and Repeater mode Login method: Only allow Windows clients login DIR-506L via http://dlinkrouter .[Solution]: Windows/MAC/iOS clients should access DIR-506L GUI via http://dlinkrouter and http://dlinkrouter.local 7. Hotspot Mode The DIR-506L has IP 192.168.0.1 in Hotspot Mode will cause IP conflict with other Dlink AP routers.[Solution]: If DIR-506L detects the AP IP address is 192.168.0.1, DIR-506L IP will change to 192.168.100.1 automatically.8. WiFi-Hotspot/AP/Repeater mode Notify.[Solution]: Ethernet Port LED will light when WiFi-Hotspot/AP/Repeater connection is established. 9. Improve USB recognition and indexing performance.2012.11.02V2.12(EU)b03_R0.01h1New changes:1. Modify DLNA Device Name to DIR-506L.2. Fix the issue: .mp4 files are located on DLNA Music category.3. Repeater mode Extend WiFi Setup can't work properly.4. Support PPTX file.5. Fix the issue: V2.12(EU)b02 can't work with QRS APP.6. Improve DLNA operation.2012.11.20V2.12(EU)b04_R0.01h1New changes:1. Fix the issue: Repeater mode--> Extend WiFi name--> Select ""Same SSID"", will display the message ""NO Change"" and don't save the setting.2. Add new message when modifying Wireless mode.3. Improve LAN/WAN auto-detection operation.2012.11.23V2.13(EU)b01_R0.01h4New changes:1. Fix the issue: DIR-506L USB LED should always flash before finishing USB index.2. Improve DIR-506L SharePort./Wireless operation.2012.12.14V2.13(EU)b02_R0.01i0(beta01)"New changes:1. New Feature: Add 3G WAN type(only support the specific D-Link 3G dongles)."2013.01.21V2.13(EU)b04_R0.01k2"New change:1. Based on V2.13b04.2. New Feature: Support the latest iOS QRS APP.3. New Feature: Support the latest Android QRS APP(only for Router and AP mode). "2013.01.24V2.13(EU)b05_R0.01l0"New change:1. Based on V2.13(EU)b04.2. New Feature: Support QRS APP WiFi hotspot mode.3. Fixes: Android QRS APP can't work in Repeater mode."2013.02.08V2.14(EU)b01_R0.01m0"New changes:1. Base on V2.13(EU)b05.2. New Feature: Remove DLNA, adding all 3G/4G dongle support, make the "internet connection type" behavior in Web GUI the same as DWR-1613. Fixes: In WPS page, config status still show unconfigured even after manual config SSID and security."2013.02.18V2.14(EU)b02_R0.01m0"New changes:1. Fixes: The bug of wrong APN of Vodafone."2013.02.28V2.14(EU)b03_R0.01m0"New changes:Remove Ethernet Port LAN/WAN Auto-Detection mechanism. The Ethernet Port will be always configured as WAN, but it will automatically change to LAN mode only when you configure DIR-506L as Repeater mode."2013.02.28V2.14(EU)b04_R0.01m1"New changes:Original Ethernet Port LAN/WAN Auto-Detection design is that Port will be configured as LAN mode when DIR-506L sends out DHCP Discover&PADI but doesn't receive any server's response within 0.5 seconds. In this new firmware, we extend the waiting time to 1.2 seconds. "2013.03.19V2.14(EU)b05_R0.01m3"New changes:1. Base on 2.14b04.2. Implement new language strings for new Wizard feature."2013.04.23V2.14(EU)b06_R0.01n2"New changes:1-Fixes: Email Settings can't work properly.2-Improvement: Scanning the WLAN environment in HotSpot mode looks in Firefox browser very crappy. "2013.11.18V2.14(EU)b06"New changes:1-Fixes: Email Settings can't work properly.2-Fixes: LAN-port can't work in HotSpot mode"
D-Link_DIR-506L Release notes2014.9.30V2.15b08_03ND0.1014New Feature: Support NAT enable/disable feature on DHCP/StaticIP/PPPoE/3G WAN type. 2014.7.2V2.15b07_03ND0.1013New changes:1-New Feature: Support New 3G dongle DWP-156B1.2-New Feature: Support New 3G dongle DWP-157B1.3-New Feature: Support 3G dongle MF-193A. 2014.2.7V2.15b06_03ND0.1010New Feature: Support New 3G dongle Micromax 300G(ISP:- BSNL). 2013.10.15V2.15b05_03ND0.1009New Feature: Support New 3G dongles ZTE MF825A and MF628. 2013.9.10V2.15b04_03ND0.1008New Feature: Support New 3G dongle ZTE MF825A. 2013.8.7V2.15b03_03ND0.1007New Feature:Support New 3G dongle T-U500. 2013.7.8V2.15b02_03ND0.1005New changes:Fixes: DIR-506L can't work stable under AP/Repeater mode. 2013.7.5V2.15b02_03ND0.1005New Feature: Resume LAN port function while DIR-506L works on 3G/WiFihotspot mode. 2013.6.13V2.15b01_03ND0.1003New changes:Base on V2.14b07 and implement the latest O3G code.1-Fixes: After set password on DUT, the page should display hidden characters.2-Fixes: There is no dialogue window for WPS working(PBC) when user win7 LAC PC connect to DUT.3-Fixes: After entering into folder view, and modify account by inputting different account in web address after "Sid=", canswitch to other account without login again.4-Fixes: User can sometimes change the user id url in Web Access folder view and bypass authentication.5-Fixes: Sometims User will not know which folder he's current locate in.6-Fixes: Sometims User will not know which folder he's current locate in.7-Fixes: User can sometimes change the user id url in Web Access folder view and bypass authentication.8-Fixes: The login password length can input 16 characters but login password setting page only allow 8 characters.9-Fxies: There is no dialogue window for WPS working(PBC) when user win7 LAC PC connect to DUT.10-Fixes: WPS1.0 should support WEP security.WPS2.0 not support WEP and WPA TKIP.(It's a standard)11-Fixes: Wireless security field of repeater mode with WEP cannot input 64bit ASCII value.12-Fixes: After click "Email Log Now" button, the UI message will not auto disappear.13-Fixes: The password always display blank, even user have setting a password.14-Fixes: When DUT is AP mode, device time always is wrong.15-Fixes: If DUT is AP mode, the tool page will have no syslog setting page but from log page of link button will redirect tosyslog setting page.16-Fixes: If set WAN side to static, DUT always show connect to Internet.(DUT WAN port no connect cable)17-Fixes: Create a folder in web access which name contains a quotation, the warning message is ambiguous.18-Fixes: In Shareport Web Access or Shareport app, userwithout a write permission can still click the "upload", "delete" and"create folder" button and UI will let user to choose which file toupload, which file to delete or the folder name to create.19-Fixes: When setting to AP or repeater mode, there are still "WAN" showed in status and shows PPPoE or DHCP20-Fixes: Set DUT to AP and repeater mode and change lan ip settings, config will not be saved.21-Fixes: UPnP information is not correct.22-Fixes: Change email recipient and save, then click email log now, recipient will change back to the previous one.23-Fixes: Use HTC Android 4.0.3 browser to open web UI and change WAN type to 3G/4G, settings annot be saved.24-Fixes: Cannot detect DWM-157 A1.25-Fixes: After user use internet connection setup wizard to setting DUT wireless, the WPS setting page still display "unconfigured".26-Fixes: After downgrade to old firmware and then upgrade to new firmware, DUT will crash.27-Fixes: Repeater mode of wireless setting page should display repeater SSID, but DUT display extend SSID.28-Fixes: Repeater mode of auto channel scan behavior very strange.29-Fixes: Wireless LAN will auto disable auto scan function, if DUT from router mode change to AP mode.30-Fixes: Setup wizard will allow user to save setting that enable security without key.31-Fixes: Sometimes user cannot select shareport folder after USB hot plug/unplug.32-Fixes: Opera browser cannot login to WebAccess.33-Fixes: Some page's banner are wrong(advance wireless, advance network).34-Fixes: After setup with internetion connection wizard, wireless auto-scan will be disabled.35-Fixes: DUT does not support DWM-156 A5/A6 in this version (Known issue).36-Improvement: After set application rule then create traffic from WAN to WLAN, the DUT will reboot.37-Improvement: If DUT make shareport index file, the wireless client cannot get IP from DUT.38-Improvement: BT download is unstable. 2013.4.17V2.14b07_R0.01n2New changes:1. Base on V2.14b06.2. Implement the latest APN Table "D-Link WW APN_2013_03_27(3G).xls". 2013.3.27V2.14b06_R0.01m4New changes:1. Base on V2.14b05.2. Fixes: DIR-506L can't work with DWM-156A5/A6 and Huawei EC156.3. Fixes: SNMP feature can't work with PowerSNMP Free Manager andSolarWinds Network device manager. 2013.3.21 V2.14b05_R0.01m3New changes:1. Base on V2.14b04.2. Modify the language strings of new Wizard. 2013.3.5V2.14b04_R0.01m3New changes1. Fixes: Wizard string change.2. New Feature: Disable Ethernet Port functionality when DIR-506L is configured as WiFi Hotspot WAN.3. Improvement: After 12hours BT Endurance test, DUT have reboot.4. Fixes: Cannot complete upload big file to storage from shareport WEB access.5. Fixes: IPhone cannot upload file from shareport mobile APP.6. Fixes: In WPS page, config status still show unconfigured even after manual config SSID and security.7. Improvement: DUT will reboot during FTP wireless endurance test.8. Fixes: If there is folder named !@#$%^&()_+ would cause SharePort Web Access unable to display.9. Fixes: After hot plug and unplug USB storage, press DUT reboot button, the WEB GUI will display garbled characters.10. Fixes: In Shareport web ccess and shareport app, files larger than 2G will not be displayed.11. Fixes: A user with "read only" permission can still upload files and create folders using IE.12. Fixes: If plug storage device off from dut after filescaning completed, click on reboot button or doing any settings thatneed rebooting for taking effect, web ui would become garbled.13. Fixes: In shareport USB disk, if a file's name contaions "+", click it in Web Access browser will show "Cannot display the webpage".14. Fixes: On android and iOS shareport app, both can notaccess subfolder of root folder if switch to other manual created useraccount while storage device has massive files(4684 Files and 253Folders of 5.29G).15. Fixes: A user with "read only" permission can still upload files and create folders using IE.16. Fixes: DUT cannot disable WPS because DUT dump a warning message about "PIN code length must=8".17. Fixes: Can not config device through android device with QRS mobile app, but iOS can.18. Fixes: Sometimes changes Web Access view to folder view will cause Web Access stop working.19. Fixes: In Shareport web ccess and shareport app, files larger than 2G will not be displayed.20. Fixes: A user with "read only" permission can still upload files and create folders using IE and Shareport mobile app.21. Fixes: In shareport USB disk, if a file's name contaions"+", click it in Web Access browser will show "Cannot display the webpage".22. Fixes: DUT cannot disable WPS because DUT dump a warning message about "PIN code length must=8".23. Fixes: Can not config device through android device with QRS mobile app, but iOS can.24. Fixes: After hot plug and unplug USB storage, press DUT reboot button, the WEB GUI will display garbled characters.25. Improvement: At during BT download, WLAN PC ping internet timeout rate over 20%.26. Fixes: On android and iOS shareport app, both can notaccess subfolder of root folder if switch to other manual created user account.27. Fixes: If WAN type is PPTP, the DUT status page connection time will became to network status.28. Fixes: The WAN status of "connection time" is countdown, not increase the time.29. Fixes: After change wireless mode to AP mode, cannot use "dlinkrouter.local" to login WebUI.30. Fixes: Change DUT to AP mode and DUT get IP from DHCP server, but DUT status page still display 192.168.0.1.31. Fixes: Repeater mode setting page have display special symbol.32. Fixes: Repeater mode security is WEP, client cannot connect to DUT.33. Fixes: When DUT is repeater mode and PC use IE9, sometimes click site survey DUT will no any response.34. Fixes: After change wireless to AP mode the login main page still display "Internet connection setup Wizard".35. Fixes: If change wireless from AP mode to router mode, the wireless LAN side will get WAN side IP.36. Fixes: Internet connection wizard of next button will changed to gray out, after the page from wifi hot spot to static.37. Fixes: After set application rule then create traffic from WAN to WLAN, the DUT will reboot.38. Fixes: The AP mode login UI need to login twice.39. Fixes: DUT cannot be change default LAN IP.40. Fixes: Only admin can access storage, other user cannot access storage even user have permission of read/write.41. Fixes: If DUT change access port, shareport app cannot access storage anymore.42. Fixes: Use Google Chrome and Firefox to login DUT Web UI, user cannot change WAN type to 3G/4G(but IE can).43. Fixes: Use HTC Android 4.0.3 browser to open web UI and change WAN type to 3G/4G, settings annot be saved44. Fixes: No 3G option in internet setup wizard.45. Fixes: Connection wizard will fail to proceed if you type the original password in wizard step 1.46. Improvement: BT download is unstable. 2013.3.4V2.14b03_R0.01m3New changes1. String change2. Browser control by session3. Remove PPPoE ip address & Service name4. Add Device name , default as "dlinkrouter"5. Wizard string change. 2013.03.01V2.14b02_R0.01m2New changes:1. New Feature: Implement new Internet Connection Setup Wizard.2. New Feature: Add the UI indicated what mode the DIR-506L is in. 2013.02.08V2.14b01_R0.01m0New changes:1. Base on V2.13b04.2. New Feature: Remove DLNA, adding all 3G/4G dongle support, make the"internet connection type" behavior in Web GUI the same as DWR-1613. Fixes: In WPS page, config status still show unconfigured even aftermanual config SSID and security. 2013.01.11V2.13b04_R0.01k1New changes:1. Base on V2.13(CNTW)b04.2. New Feature: Add 3G WAN type(only support the specific D-Link 3G dongles). 2013.01.04V2.13b02_R0.01h4New changes:1. Base on V2.13(EU)b02.2. Fix the issue: Can't change LAN IP Address. 2012.11.23V2.13b01_R0.01h4New changes:1. Base on V2.13(EU)b01.2. Fix the issue: DIR-506L USB LED should always flash before finishing USB index.3. Improve DIR-506L SharePort./Wireless operation. 2012.08.13V2.11b02_R0.01c0New changes:1-Fixes: Can't display category files with NTFS format USB device.2-Fixes: Change DIR-506L's wireless encryption mode but will cause WAN WiFi-Hotspot can't reconnect after rebooting.3-Fixes: After establishing WiFi-Hotspot connection, Status page can't display default gateway information.4-New Feature: QRS APP can't detect WAN PPPoE type. 2012.08.10V2.11b01_R0.01c0New changes:1-Fixes: DIR-506L can't work with new iOS Shareport APP(18.104.22.168)2-Fixes: When DIR-506L is configured as WAN WiFi-Hotspot and the AP LAN IP is 192.168.1.0/24, the LAN/Wireless clients will not be able toconnect to internet.3-Fixes: Avoid the files on USB device damaging or losing.4-New Feature: Modify the login page.5-New Feature: Modify WiFi-Hotspot WiFi password word.6-New Feature: Display WiFi-Hotspot AP SSID on Status page.7-New Feature: Disable "Press WPS button to disable WiFi OFF" feature. 2012.08.07V2.10b05_R0.01c0New changes:1-Improvement: Reduce the time of establishing/update index.2-New Feature: Implement new LED design.3-New Feature: Implement ethernet port LAN/WAN auto-detectionmechanism(only for WAN DHCP/PPPoE with auto-reconnect enabled).4-New Feature: LAN/Wireless clients can access DIR-506L's GUI via http://dlinkrouter .5-New Feature: When DIR-506L is configured as AP Only/Repeater mode,LAN/Wireless Windows clients can access DIR-506L's GUI via http://dlinkrouter .6-Fixes: All LEDs will be off nearly 12 seconds during booting.7-Fixes: Hotplug exFAT USB device will cause the follow-up USB device to lose all files.8-Fixes: After uploading some files to USB device, sometimes need to wait some time and then those files display. 2012.07.30V2.10b04_R0.01c0New changes:1-Fixes: Remove Guest Zone feature from GUI.2-Improvement: During DIR-506L booting process, LED Wi-Fi/USB/Ethernet will light on sequentially (跑馬燈).3-Fixes: Avoid iOS device IP address conflict. 2012.07.26V2.10b03_R0.01b0New changes:1-Fixes: Wireless Guest SSID is always alive even if users don't enableit on GUI.2-Improvement: USB LED is always flashing if you hotplug USB device under booting ok status. 2012.07.25V2.10b02_R0.01b0New changes:1-New Feature: Follow new USB LED indication in "New LED Indication" tab:a. Share port is not ready --> regular flashing green.b. Share port ready --> solid green.c. Remove USB --> off.2-New Feature: Wi-Fi won't be workable until SharePort function is readyif USB storage is attached during booting procedures. 2012.07.23V2.10b01_R0.01b0New changes:1-New Feature: QRS implemetation.2-New Feature: INFO card supported.3-New Feature: Implement Auto-Channel Scan by default.4-New Feature: Open GUI via http://dlinkrouter 2012.07.13V2.00b02_R0.01a0New changes:1-Fixes: iPad/iPhone connect to DIR-506L but the connection mode can't be changed from 3G mode to wireless mode. 2012.06.28V2.00b01_R0.01a0New changes:1-Fixes: DBG12060174 Shareport Web Access Link cannot redirect to correct page if DUT set DDNS.2-Fixes: VBG12060251 D-Link DDNS can't register successfully.3-Fixes: DBG12060153 DUT DDNS always register fail.4-Fixes: DBG12060108 If folder name is special characters, DUT cannot create new folder.5-Fixes: DBG12060114 If user name is special characters, this user cannot access any files on web access page.6-Fixes: DBG12060173 Internet connection setup wizard of wifi hotspot will redirect to 3G setup page.7-Fixes: DBG12060170 Internet setup wizard of static IP address page is wrong.8-Fixes: VBG12060250 Internet Wizard "Static IP" and "WiFi hotspot" mode can't redirect to the correct setup page.9-Fixes: DBG12060176 After use wireless connection setup wizard to setup WEP with ASCII password, the wizard setup page of password field willdisplay blank.10-Fixes: DBG12060177 Manual wireless setup cannot choose WEP of security HEX or ASCII.11-Fixes: DBG12060155 GUI copyright years too old.12-Fixes: DBG12060158 Schedules page will display some special characters.13-Fixes: DBG12060125 At wireless of WEP setting page format not alignment (firefox and chrome and IE8.9).14-Fixes: DBG12060131 When DUT is AP with wireless security EAP, the wireless client cannot connect to DUT.
Citazione di: Pondera il 18 Marzo 2013, 09:38:23Sembra che questo sistema di recupero fosse presente su diversi vecchi modelli di altra marca basati sul Ralink RT3050F con un bootloader chiamato Jboot (Jon bootloader?) presente allo stesso IP.Presente pure sul vecchio DI-524 con ben 11 revisioni hardware, due delle quali,la H1 e la I1, basate sempre su Ralink.Disponibile ora sul nuovo DSL-2770L basato, quindi, su MediaTek (Ralink prima e TrendChip prima ancora).
Citazione di: 'fratzicu'while pressing the reset button I powered on the device. The device has the IP 192.168.123.254 and dhcp active. I acessed the failsafe webinterface there
Citazione di: 'primetimelive'I used an IP Scanner to find out what the router was broadcasting it's IP Address to be and logged on using that. In my case it was 192.168.123.254
Citazione di: 'asteed'
Pagina creata in 0.105 secondi con 25 interrogazioni.