Menu principale

DIR-865L: Router Gigabit Cloud Dual Band AC 1750

Aperto da Pondera, 12 Marzo 2013, 07:45:58

Pondera

D-Link DIR-865L Cloud Router 5700
instradatore senza fili 802.11ac 1750 a doppia banda simultanea
(450 Mbps su 2,4 GHz + 1300 Mbps su 5 GHz)
con tecnologia a nuvola




DIR-865L A1 (Broadcom BCM4706)

Caratteristiche (fonte scheda tecnica)
Connectivity:
• 802.11 a/b/g/n/ac Wireless LAN for wireless compatibility with all previous standards
• Gigabit WAN and LAN ports for high-speed wired connections
• USB 2.0 port to connect storage drives and printers for sharing
• Six antennas with beamforming technology to optimise your wireless coverage
mydlink™ Cloud Services:
• You can monitor website visits and intrusion attempts from wherever you are.
• Remotely view and manage your network over the Internet
• Access your network through the free mydlink™ app
Mobile Apps:
• mydlink™ Lite app helps you access, manage and view your network remotely
• SharePort™ Mobile app lets you stream and share media files and documents across your network
• QRS Mobile app to set up your network using a mobile device
Security:
• WPA & WPA2 wireless encryption protects the network from intruders
• Wi-Fi Protected Setup (WPS) securely adds devices to your network at the push of a button

Panoramica (Fonte D-Link IT 2013)
Upgrade to Wireless AC Performance
The Cloud Gigabit Router AC1750 creates a blazing fast home network that connects all of your computers and mobile devices to your broadband Internet connection, 6x faster than the previous standard. Concurrent dualband 802.11ac brings you the future of high-bandwidth wireless connectivity allowing you to stream HD video, make Internet calls, and surf the Internet from every corner of your home without interruption. The Cloud Gigabit Router AC1750 is mydlink™ Cloud enabled, so you can effortlessly access and view your network no matter where you are. This router is also backwards compatible with earlier wireless standards.

Fast and reliable home networking
This router creates the fastest home network possible today connecting all of your computers and mobile devices to your broadband Internet connection. Concurrent dualband 802.11ac brings you the future of high-bandwidth wireless connectivity allowing you to stream HD video, make Internet calls, and surf the Internet from every corner of your home without interruption. Gigabit Ethernet ports provide high-speed wired connections for up to four PCs or other devices. It's easy to-use, and comes IPv6-ready for a reliable network today and tomorrow.

Greater coverage and speeds with Wireless AC
This router uses the latest Wireless AC Technology, which can provide transfer rates of up to 1.3Gbps **(1300AC + 450N). Faster gigabit wireless speeds allow you to download content and synch files 6 times faster than the previous standard and provide you with whole home coverage. The router operates on both the 2.4 GHz band and 5 GHz wireless bands at the same time using concurrent dualband technology and six internal antennas. This allows you to browse the web, chat and email using the 2.4 GHz band, while simultaneously streaming digital media, playing online games, or making Internet phone calls on the 5 GHz band.

Stay informed and protected with mydlink™ Cloud Services

This router gives you complete control by allowing you to monitor who is connecting to your network, which sites they are visiting and block unwanted visitors. By downloading the free mydlink™ app you can monitor your home network remotely.

Share and stream files with SharePort™ Technology
Connect a USB storage device to your Cloud Gigabit Router AC 1750 to create a shared storage space, making it easy to access and share files between computers and devices connected to your network. Plug in a USB hard drive to stream your library of videos and music to your laptop. Plus, the SharePort™ Mobile app for iOS and Android™ devices allows you to back up photos and videos stored on your device. You can even customise your shared storage space by creating separate accounts to control access to the USB drive, so you can share your music with everyone but keep your personal files private. This Cloud Router can also be used as a media server for your home to stream media stored on your USB storage drive to any DLNA compliant player like the Boxee Box by D-Link.

** Maximum wireless signal rate derived from IEEE standard 802.11ac (draft) specifications which are subject to change. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental factors will adversely affect wireless signal range.

Specifiche (Fonte D-Link IT 2013)
Device interfaces
• 802.11 a/b/g/n/ac Wireless LAN
• Four 10/100/1000 Gigabit LAN ports
• 10/100/1000 Gigabit WAN port
• USB 2.0 port

Standards
• IEEE 802.11ac (draft)
• IEEE 802.11n
• IEEE 802.11g
• IEEE 802.11b
• IEEE 802.11a
• IEEE 802.3
• IEEE 802.3u

Antenna Type
• 6x internal antennas with beamforming technology

Minimum System Requirements
• Windows 7/Vista/XP SP3 or Mac OS X 10.4 or higher Microsoft Internet Explorer 6 or higher, Firefox 1.5 or higher, or other Java-enabled browser
• CD-ROM
• Ethernet network interface
• Cable or DSL modem
• Subscription with an Internet Service Provider

mydlink™ Features
• Remote Management
• View current upload/download bandwidth
• View currently connected clients
• View web browsing history per client
• Block/unblock client network access
• Manage wireless network details
• Accessible through a web browser or iOS or Android™ mobile app

Mobile App Support
• mydlink™ Lite
• SharePort™ Mobile
• QRS Mobile

Wireless Security
• WPA & WPA2 (Wi-Fi Protected Access)
• Wi-Fi Protected Setup (WPS) PIN/PBC

Dimensions
• 32 x 167 x 240 mm (1.26 x 6.57 x 9.45 inches) (without pedestal)
• 70 x 167 x 252 mm (2.76 x 6.57 x 9.92 inches) (with pedestal)

Weight
• 0.55kg

Power
• Input: 100 to 240 V AC, 50/60 Hz
• Output: 12 V DC, 3 A

Temperature
• Operating: 0 to 40 °C (32 to 104 °F)
• Storage: -20 to 65 °C (-4 to 149 °F)

Humidity
• Operating: 0% to 90% non-condensing
• Storage: 5% to 95% non-condensing

Certifications
• FCC Class B
• CE Class B
• C-Tick
• DLNA
• IPv6 Ready
• Wi-Fi Certified
• Wi-Fi Protected Setup (WPS)
• Wi-Fi Multimedia (WMM)
• Compatible with Windows

Documentazione
Scheda tecnica Altro
Guida installazione Altro
Manuale utente Altro

Mini guide essenziali di configurazione

Visuale esterna del prodotto in 3D a 360°


Software
Programmi di utilità/App SharePort & SharePort Plus
Codice sorgente GPL

Firmware
WORLDWIDE (Mondiale)
DIR-865L A1 1.20 build 01-01_HOTFIX 20200511 con nota edizione
DIR-865L A1 1.20 build 01-01_HOTFIX 20181207 con nota edizione cumulativa + firmware intermedio & istruzioni per la transizione
DIR-865L A1 1.20 build 01_HOTFIX 20180227 con nota edizione + firmware intermedio & istruzioni per la transizione
DIR-865L A1 1.10 build 01_HOTFIX 20180125 con nota edizione + firmware intermedio & istruzioni per la transizione
DIR-865L A1 1.08 build 01 20150419 con nota edizione (ultimo firmware NON CRIPTATO da usare per il RECOVERY)

StarHub Customers (Singapore)
DIR-865L SHC

Supporto internazionale D-Link
Pagina prodotto: Italia, Medio Oriente, Australia
Repositorio scaricamenti: Europa, Singapore, USA, US-SEC_ADV, Germania, Polonia, Australia, Canada, USA
Supporto Tecnico: TW TSD, Singapore, Taiwan, Canada, US Legacy, America Latina, IT mydlink


Pondera

Pubblicato nel 1° messaggio di questa discussione firmware DIR-865L A1 1.04 build 01 patch 01 20121112.

Pondera

Note edizione cumulative del firmware DIR-865L A1 1.03 build 02 20121105.


DIR-865L Release Notes
======================

Firmware: v1.03b02
Hardware: A1
Date: Date: 2012/11/05

Problems resolved:

1. Fix mDNS packet (multicast packet) loss on 2.4Ghz Wireless LAN after several hours

Enhancements:

1. Update email max character limitation to 128 characters.

----------------------------------------------------
Firmware: v1.02
Hardware: A1
Date: Date: 2012/09/28

Problems resolved:

1. Fix 2.4GHz low throughput in noise environment
2. Fix setup wizard issue in iOS6
3. Fix setup wizard behavior

Enhancements:

1. Support QRS mobile pro
2. Support domain name http://shareport.local for web file access
3. Enhance NTFS write performance
4. Update mydlink agent
5. Enhance wireless Auto-Channel selection

----------------------------------------------------
Firmware: v1.01b06
Hardware: A1

- Initial Release.

Pondera

Pubblicato nel 1° messaggio di questa discussione firmware DIR-865L A1 1.04 build 06 20130108.


DIR-865L Release Notes
======================

Firmware: v1.04b06
Hardware: A1
Date: Date: 2013/08/01

Problems resolved:

1. NAT Loopback Issue

----------------------------------------------------

Pondera

Pubblicato nel 1° messaggio di questa discussione firmware DIR-865L A1 1.04 build 07 20130129.

Pondera

Pubblicato nel 1° messaggio di questa discussione firmware DIR-865L A1 1.05 build 03 20130509.


DIR-865L Release Note


Firmware: DIR865LA1_FW105b03.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2013/05/09

Problems Resolved:
1. Fixed DLNA issues.


Firmware: DIR865LA1_FW105b01.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2013/04/03

Problems Resolved:
1. Fixed the multiple security vulnerabilities.


Firmware: DIR865LA1_FW104B07.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2013/1/29

Problems Resolved:
1. change wifi 2.4g power from hw.
2. fix mydlink portal can't login DUT if CAPTCHA
3. fix lan packet at wan side if with invalid tcp flags(bt test)
4. When wireless security mode is WPA or WEP, WPS should be disable.
5. fix wrong passphrase value while set wifi setting from mydlink portal



Firmware: DIR865LA1_FW104B06_patch01.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2013/1/8

Problems Resolved:
1. Fix lan client virtual server loopback problem.


Firmware: DIR865LA1_FW104B06.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/12/26

Problems Resolved:
1. Fix mydlink can not binding account in EU server.
2. Fix QRS mobile can not set with special character (<>).
3. Fix Android QRS mobile can not set 5G setting.
4. The copyright change to 2012-2013


Firmware: DIR865LA1_FW104B05.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/12/17

Problems Resolved:
1. remove ctf pppoe/pptp/l2tp support, because can not pass bt test


Firmware: DIR865LA1_FW104B04.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/11/21

Problems Resolved:
1. Correct the jumbo frame switch register. Only support it at giga mode
2. Fix Upnp IGD do not period send notify.


Firmware: DIR865LA1_FW104B03.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/11/20

Problems Resolved:
1. Enable jumbo frame,support max 9k bytes.
2. Fix the Web UI very slow if DLNA access large file(decrease DLNA priority).
3. In dlink IPV6 env(PPP6 share with ppp4) cause the ppp4 mss adjust fail.( http://www.citibank.com.tw/ can not access.
4. Avoid user can ping 0.0.0.0 in UI check
5. Show correct 802.11ac information in wireless clients status


Firmware: DIR865LA1_FW104B02.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/11/16

Problems Resolved:
1. Broadcom patch 2.4G interference bug.( Fixed bug in clearing/restoring of bphy desense state during scans, which was causing hw and sw states to be out of sync. Also account for phy regs getting reset due to bw/band changes during scans.)
2. Change kernel printk level to 1.because the CTF print garbage.(We do not have source code).
3. Web file access remote access hyperlink as DDNS host if DDNS is connected.


Firmware: DIR865LA1_FW104B01.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/11/08

Problems Resolved:
1. Patch wifi driver from sdk 6.30.102.9 for 2.4G interference issue.
2. fix account will login WFA fail if no disk connected and account access path set root
3. Added mDNS TXT entries for HNAP services.

Copy from 1.03b01


Firmware: DIR865LA1_FW103B02.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/11/2

Problems Resolved:
1. base on 102B05 and update email max input as 128 characters.
2. Fix mdns packet(multicast packet) lose in 2.4G after several hours.


Firmware: DIR865LA1_FW103B02.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/11/2

Problems Resolved:
1. base on 102B05 and update email max input as 128 characters.
2. Fix mdns packet(multicast packet) lose in 2.4G after several hours.


Firmware: DIR865LA1_FW103B01.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/10/22

Problems Resolved:
1. Add pppoe/PPTP/L2TP NAT acceleration.
2. Fix mdns packet(multicast packet) lose in 2.4G after several hours.
3. After download config setting, then change setting and reboot. The management username/password will change to default(admin/blank).
4. Add mydlink API error check in wifi security setting.
5. [IPV6] Solve the problem that after setting IPv6 to PPPoE with create a new session, IPv4 Internet connection is changed to last time mode.
6. [IPV6] Solve the problem that while setting IPv6 to share with IPv4, DNS settings cannot be modified and the warning message is displayed.
7. [IPv6]Modify the behavior of dhcp6c as follows:
a. At first, we use ::/56 for default pd hint.
b. Then we use the last time pd hint if the connection is reconnected.


Firmware: DIR865LA1_FW102B05.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/10/02

Problems Resolved:
1. Fix http daemon would crash


Firmware: DIR865LA1_FW102B04.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/09/28

Problems Resolved:
1. Fix setup wizard
2. Fix ios6 post cache


Firmware: DIR865LA1_FW102B03.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/09/27

Problems Resolved:
1. Update Language Pack
2. Fix setup wizard
3. Enhance auto channel
4. Fix ios6.0 safari


Firmware: DIR865LA1_FW102B02.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/09/20

Problems Resolved:
1. Update Mydlink API from trunk
2. Change the default remote https management port to 8090
3. Enable GRE as build in not module
4. Enable pppoe paassthrough
5. fix Mydlink dns_query_log date display error
6. Update WFA from trunk


Firmware: DIR865LA1_FW102B01.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/08/31

Problems Resolved:
1. Fix 2.4G low throughput in noise env.
*enable frameburst.
*set acs_pol_idx=3
* set interference_override=4.

2. add QRS pro support.
3. Remove WPS auto disable if mac filter enable.
4. When Enable SPI,LAN PC still receive TCP packet from WAN PC.(DUT should drop "all" fake TCP packet) There is no any fake TCP packet incoming in the status\log page.
5. IPv6 user defined DNS show error on status page.
6. Fix IE8 sometime can not login issue.(if cookie already exist in http request,the login will fail)
7. New mydlink agent without event notification(VERSION=2.0.16-b5)
8. Can't use Https (Remote port 8181) even disable SharePort Web Access in storage function
9. User can't setting port forward to 1-8079 ,even disable SharePort Web Access function in STORAGE
10. Enhance NTFS write perfornance.
11. Support domain name Http://shareport.local to access web file access.


Firmware: DIR865LA1_FW101B07.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/07/23

Problems Resolved:
1. Fix auto reboot issue


Firmware: DIR865LA1_FW101B06.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/07/19

Problems Resolved:
1. Update WIFI power table


Firmware: DIR865LA1_FW101B05.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/07/16

Problems Resolved:
1. Run nvram erase to clear bootcode variable when upgrade bootcode in firmware
2. Implement AutoIP function in APC mdoe


Firmware: DIR865LA1_FW101B04.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/07/12

Problems Resolved:
1. Change the wording of some web page.
2. Auto reboot if the bootcode is upgrade in firmware
3. Fix 5G autochannel can use HT20 only in noisy environment


Firmware: DIR865LA1_FW101B03.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/07/11

Problems Resolved:
1. Fix auto channel in 5G can run HT20 only.
2. In router mode, we can enter to web by using http://dlinkrouter.local
3. Upgrade bootcode automatically if we detect the bootcode is not the newest one. After upgraded, the no. of session will become 36000
4. Fix APC connection problem


Firmware: DIR865LA1_FW101B02.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/07/05

Problems Resolved:
1. Start branch from this version.
2. Fix bug no.104,118,120,165,170
3. Implement STA WPS-PBC.

Know issue:
1. Bug171:[Mydlink] Use IPOHNE to change 5GHz security, after reboot 2.4GHz don't have any beacon
2. Bug48: [Help -Internet ] The internet of help file lost bridge mode.


Firmware: DIR865LA1_FW100B25.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/06/7

Problems Resolved:
1. Fix APC (pata mode) rekey fail when endurance test.
2. Fix APC is hard to connect to AP when AP change WIFI setting.
3. PPPOE passthrough function
4. Static route function fail
5. Fix anti-spoof not work.
6. Fix the device will save db without db changed after WPS success. We should not do db save if the setting is not change.

Know issue:
1. WPA-EAP not work
2. APC (pata mode) sometimes can not re-connect automatically in special steps.


Firmware: DIR865LA1_FW100B24.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/06/4

Problems Resolved:
1. Patch Broadcom NEW SDK (linux-2.6-router-6.30.39.2001.tar.gz).
2. Always set WPA rekey time to 78 hours.(work around rekey fail when endurance test)
3. Fix NAT throughput (DHCP ,static IP) is low (300Mbps) after version 1.00b17
4. Mydlink account is set once to enter the empty information, "Login" button showing the gray scale on WebGUI
5. Fix hping cause device reboot.

Know issue:
1. WPA-EAP not work
2. APC (pata mode) rekey fail when endurance test.
3. APC (pata mode) sometimes can not re-connect automatically.
           

Firmware: DIR865LA1_FW100B23.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/05/29

Problems Resolved:
1. Remove WPA auto.Only have WPA only and WPA2 only.Because WPA auto is not work now.
2. Correct Web access session timeout algorithm.
3. Default wps as configured.
4. Redirect to mydlink portal after success setting mydlink.

Know issue:
1. WPA-EAP not work


Firmware: DIR865LA1_FW100B22.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/05/29

Problems Resolved:
1. APC +  AP wifi 5G can reach 640 Mbps.
2. The APC status page show connect status.

Know issue:
1. WPA-EAP not work
           

Firmware: DIR865LA1_FW100B21.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/05/29

Problems Resolved:
1. APC can not site survey channel 12,13 when country code is content channel 1~13.(b20 not fix)
2. Remove dnsquery, event log setting on WEB UI. This entry is setting on mydlink portal.

Know issue:
1. WPA-EAP not work
2. AC throughput is not as good as Broadcom SDK F/W.


Firmware: DIR865LA1_FW100B20.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/05/28


1. APC can not site survey channel 12,13 when country code is content channel 1~13.
2. Fix mydlink sendmail fail using google mail.
3. default enable mydlink dnsquery.

Know issue:
1. WPA-EAP not work
2. AC throughput is not as good as Broadcom SDK F/W.


Firmware: DIR865LA1_FW100B19.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/05/27

Problems Resolved:
1. Fix WPA/WPA2 auto fail in APC mdoe
2. Modify power table provide from HW.

Know issue:
1.WPA-EAP not work.
2. Sometimes WIFI 5G beacon transmit stop or loss
3. AC throughput is not as good as Broadcom SDK F/W.


Firmware: DIR865LA1_FW100B18.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/05/23

Problems Resolved:
1. Fix WPS fail if device as enrollee
2. Remove TKIP+AES auto mode in APC mode.(driver not support)
3. Disable frameburst on 2.4G band.(just reference to Broadcom sdk config)
4. Fix APC site survey will lose 1 entry.
5. Fix QRS mobile can't set WIFI 5G .

Know issue:
1. WPA-EAP not work.
2. iphone sometime can't connect to WIFI 2.4G.
3. AC throughput is not as good as Broadcom SDK F/W.


Firmware: DIR865LA1_FW100B17.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/05/23

Problems Resolved:
1. Update mydlink agent to VERSION=2.0.15-b12
2. Fix event data (flag and version fied) error(mydlink report).
3. Fix kernel panic after setting access control.Now It is need boot after setting access control to take effect.
4. Remove TKIP+AES auto mode in APC mode.(driver not support)
5. Fix tool matrix21 test max session fail.

Known issue:
1. WPA-EAP not work.


Firmware: DIR865LA1_FW100B16.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/05/22

Problems Resolved:
1. Correct picture in wizard(cable not connect),smart404 error page,lld2d icon.
2. Add mfc wlan24g and mfc wlan5 for mfg.

Known issue:
1. WPA-EAP not work.


Firmware: DIR865LA1_FW100B15.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/05/21

Problems Resolved:
1. Fix AC low throughput issue,
2. Remove mydlink in APC mode.
3. Fix mydlink API security issue.(bug:API can get data without authentication )
4. Disable schedule function in APC wirelesee config.

Known issue:
1. WPA-EAP not work.


Firmware: DIR865LA1_FW100B14.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/05/21

Problems Resolved:
1. Enable wlan driver support test mode.(For HW verify wifi power.)
2. Fix mydlink block device fail.

Known issue:
1. WPA-EAP not work.


Firmware: DIR865LA1_FW100B13.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/05/21

Problems Resolved:
1. Fix device memory leak qhen enable QoS.
2. Fix mydlink status show blank wan ip in pppoe,pptp,l2tp mode.

Known issue:
1. WPA-EAP not work.


Firmware: DIR865LA1_FW100B12.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/05/19

Problems Resolved:
1. Fix APC password field disappear when WPA auto selected.

Known issue:
1. WPA-EAP not work.


Firmware: DIR865LA1_FW100B11.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/05/19

Problems Resolved:
1. Update mydlink agent from 2.0.15-b10 to 2.0.15-b11
2. Fix guest zone not work.
3. Fix android shareport mobile can't upload file.
4. Fix DHCP list do not show PC name.
5. remove APC mode security WPA only and WPA2 only,change to WPA AUTO.
6. Change PPP mode from dial on demeon to always after mydlink register success.
7. let device reboot when out of memory.
8. Remote management access fail.
9. WIFI station information error in 5G mode.
10. Change description when router mode change to bridge mode.
11. Remove orange blinking when F/W update.Because This is not in spec.
12. Current using random as auto channel.

Known issue:
1. WPA-EAP not work.


Firmware: DIR865LA1_FW100B10.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/05/18

Problems Resolved:
1. Fix Bridge mode do not using HT80 as default in A band.
2. Remove blinking orange led when F/W upgrade.
3. Fix the WAN port link speed can not work.
4. Other GUI bug following bugtracker.

Known issue:
1. Bridge mode wifi is not fine tune.
2. WIFI auto channel not work.
3. WPA-EAP not work.


Firmware: DIR865LA1_FW100B09.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/05/17

Problems Resolved:
1. Fix Access control url filter not work.
2. Modify power table for FCC request by HW RD.
3. Enable fastroute for USB performace.
4. Fix Bridge mode wifi can not connect to 2.4G.(add 5G/24G selection on UI)
5. Fix kernel BUG_ON cause bt stress test fail.(test bt again)
6. Update wizard language for some error checking message.
7. Fix disable 20/40 coexist not works.

Known issue:
1. Bridge mode wifi is not fine tune.
2. WIFI auto channel not work.
3. WPA-EAP not work.


Firmware: DIR865LA1_FW100B08.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/05/16

Problems Resolved:
1. Fix 5G AP not work in routermode.
2. Add mydlink event trigger.
3. Fix hidden page show WLAN 2 (5G)mac
4. Fix special char ", & ""can set to wifi ssid.


Firmware: DIR865LA1_FW100B07.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/05/16

Problems Resolved:
1. add bridge mode (WIFI is station mode only.But now is work on A band only)
2. bridge mode device have 192.168.0.50 management ip.
3. Modify wizard setup flow.
4. Modify auto detect timezone in wizard.
5. 5G wmm should not be config in AC mode.
6. Modify default guest zone ssid to dlink-guest and dlink-media-guest.
7. Fix web file access fail if the disk cache file damage.
8. FiX xbox360 can't discover device DLNA.
9.  Redirect any web access to wizard if device is factory


Firmware: DIR865LA1_FW100B06.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/05/16

Problems Resolved:
1. This version have kernel issue.Ignore this version.


Firmware: DIR865LA1_FW100B05.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/05/11

Problems Resolved:
1. Fix mydlink CGI get_Wireless form_wireless bug. When WPA mode  the get value display error.
2. Patch new Broadcom driver 6.30.39.13
3. Storage disk do not mount when pluged usb booting.
4. Correct model,hw,F/W version info on WEB access UI
5. Add pptp acceleration.
6. Change 5G wilreless mode "802.11ac only"to "Mixed 802.11ac"
7. Fix web file access(Storage) can not works.


Firmware: DIR865LA1_FW100B04.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/05/10

Problems Resolved:
1. Add mydlink wizard ,mydlink settion.
2. Fix WEP can not work on 2G and 5G band.
3. Fix new mini board(P307) can work with main board.
4. Add mfc init command with wifipassword parameter.if the wifipassword setting,the default ssid and password will as #5 rule.
5. Default wifi ssid is dlink-XXXX and dlink-midea-XXXX,XXX is wifi mac last 2 btye in hex string.(if wifipassword setted.)

Known issue:
1. web file access(Storage),Mydlink ????, ????.


Firmware: DIR865LA1_FW100B03.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: XXXXX

Problems Resolved:
1. We do not have 1.00b03 version.because some beta code have this name.

Note:
1. wireless through put is not fine tune.


Firmware: DIR865LA1_FW100B02.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/05/2

Problems Resolved:
1. add guest zone.
2. Add storage.(shareport mobile.)

Note:
1. wireless through put is not fine tune.


Firmware: DIR865LA1_FW100B01.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/04/24

Problems Resolved:
1. First release

Note:
1. wireless through put is not fine tune.

Pondera

Aggiunti in testa alla discussione firmware DIR-865L A1 1.05 build 01 e build 02.

blackazure

Buonasera a tutti,
ho comprato per la nuova abitazione il router Dlink DSL-320B che si connette perfettamente e il DIR-865L che non ne vuole sapere...o forse e meglio dire che non riesco a fare connettere.
Ho provate diverse configurazioni ma nulla..il led della rete è sempre rosso!!
Io ho un'adsl Alice Telecom Italia e i suddetti prodotti...
Potete indicarmi la procedura da seguire perchè non riesco ad utiliuzzare questo fantastico Cloud Router...
Grazie in anticipo.
Antonio

Pondera

Per la configurazione leggi della seguente discussione sul ns. forum:

Connettere un router DIR a internet mediante modem, altro router, HAG Fastweb

la sezione "Connessione PPPoE mediante modem o altro router".

Che revisione hardware sono e che versione di firmware hanno i due dispositivi?

blackazure

Citazione di: Pondera il 05 Agosto 2013, 08:37:45Per la configurazione leggi della seguente discussione sul ns. forum:

Connettere un router DIR a internet mediante modem, altro router, HAG Fastweb

la sezione "Connessione PPPoE mediante modem o altro router".

Che revisione hardware sono e che versione di firmware hanno i due dispositivi?

Grazie infinite per l'aiuto, grazie alla tua guida ora tutto funziona perfettamente!
Grazie grazie

Pondera

Non hai risposto! :D

Citazione di: Pondera il 05 Agosto 2013, 08:37:45Che revisione hardware sono e che versione di firmware hanno i due dispositivi?

Pondera

Pubblicato nel 1° messaggio di questa discussione firmware DIR-865L A1 1.05 build 07 20130619.


DIR-865L Software Release Notes

Firmware: v1.05
Hardware: A1
Date: 2013/07/18

Problems Resolved:
1. Fix IPv6 Auto Detection can't work
2. Fix DLNA photo display incomplete while USB dongle is NTFS format
3. Fix UPnP security issue

Enhancements:
None

Note:
None

Pondera

Messo in testa firmware DIR-865L A1 1.06SHC build 07 20131106.
N.B. Vengono solamente aggiunte le frequenze valide per Singapore, quindi può essere usato anche per il resto del mondo.


DIR-865L Software Release Notes

Firmware: v1.06SHC
Hardware: A1
Date: 2013/11/06

Problems Resolved:
1. Fix SAMBA security issue
2. Fix DS-Lite detection failed
3. Fix IPv6 connection issue
4. Fix NAT low throughput issue on 10/100 force mode.
5. Fix device reboot issue when click some web media player

Enhancements:
1. Update SG frequency table

Note:
None

Pondera

Pubblicato nel 1° messaggio di questa discussione firmware DIR-865L A1 1.06 build 06 20131025.


865DIR-865L Release Note


Firmware: DIR865LA1_FW106B06.bin
Date: 2013/10/25

Problems Resolved:
1. Email cannot send mail via smtp.gmx.de server.


Firmware: DIR865LA1_FW106B05.bin
Date: 2013/10/16

Problems Resolved:
1. Update wizard slp of PT.


Firmware: DIR865LA1_FW106B04.bin
Date: 2013/10/09

Problems Resolved:
1. Remove channel 52 for TW.


Firmware: DIR865LA1_FW106B03.bin
Date: 2013/09/10

Problems Resolved:
1. Fix internet mode switch fail while current mode is DS-Lite.
2. Fix Lan PC ping fail while internet mode switch to DS-Lite with special steps.


Firmware: DIR865LA1_FW106B02.bin (beta firmware)
Date: 2013/08/16

Problems Resolved:
1. Disable symbolic link in SAMBA.
2. SAMBA needs password to access it.
3. Cannot use relative path for web file access path.
4. Remove plaintext password from /var/passwd and /var/etc/hnapasswd.


Firmware: DIR865LA1_FW106B01.bin
Date: 2013/08/14

Problems Resolved:
1. Add 5g card 4360B0 support.


Firmware: DIR865LA1_FW105B07.bin
Date: 2013/06/19

Problems Resolved:
1. BT test maybe OOM if enable anti-spoof.
2. Fix shell injection in upnp igd addportmapping action.


Firmware: DIR865LA1_FW105b07.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2013/07/18

Problems Resolved:
1. Fix IPv6 Auto Detection can't work
2. Fix DLNA photo display incomplete while USB dongle is NTFS format
3. Fix UPnP security issue


Firmware: DIR865LA1_FW105b03.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2013/05/09

Problems Resolved:
1. Fixed DLNA issues.


Firmware: DIR865LA1_FW105b01.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2013/04/03

Problems Resolved:
1. Fixed the multiple security vulnerabilities.


Firmware: DIR865LA1_FW104B07.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2013/1/29

Problems Resolved:
1. change wifi 2.4g power from hw.
2. fix mydlink portal can't login DUT if CAPTCHA
3. fix lan packet at wan side if with invalid tcp flags(bt test)
4. When wireless security mode is WPA or WEP, WPS should be disable.
5. fix wrong passphrase value while set wifi setting from mydlink portal



Firmware: DIR865LA1_FW104B06_patch01.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2013/1/8

Problems Resolved:
1. Fix lan client virtual server loopback problem.


Firmware: DIR865LA1_FW104B06.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/12/26

Problems Resolved:
1. Fix mydlink can not binding account in EU server.
2. Fix QRS mobile can not set with special character (<>).
3. Fix Android QRS mobile can not set 5G setting.
4. The copyright change to 2012-2013


Firmware: DIR865LA1_FW104B05.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/12/17

Problems Resolved:
1. remove ctf pppoe/pptp/l2tp support, because can not pass bt test


Firmware: DIR865LA1_FW104B04.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/11/21

Problems Resolved:
1. Correct the jumbo frame switch register. Only support it at giga mode
2. Fix Upnp IGD do not period send notify.


Firmware: DIR865LA1_FW104B03.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/11/20

Problems Resolved:
1. Enable jumbo frame,support max 9k bytes.
2. Fix the Web UI very slow if DLNA access large file(decrease DLNA priority).
3. In dlink IPV6 env(PPP6 share with ppp4) cause the ppp4 mss adjust fail.( http://www.citibank.com.tw/ can not access.
4. Avoid user can ping 0.0.0.0 in UI check
5. Show correct 802.11ac information in wireless clients status


Firmware: DIR865LA1_FW104B02.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/11/16

Problems Resolved:
1. Broadcom patch 2.4G interference bug.( Fixed bug in clearing/restoring of bphy desense state during scans, which was causing hw and sw states to be out of sync. Also account for phy regs getting reset due to bw/band changes during scans.)
2. Change kernel printk level to 1.because the CTF print garbage.(We do not have source code).
3. Web file access remote access hyperlink as DDNS host if DDNS is connected.


Firmware: DIR865LA1_FW104B01.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/11/08

Problems Resolved:
1. Patch wifi driver from sdk 6.30.102.9 for 2.4G interference issue.
2. fix account will login WFA fail if no disk connected and account access path set root
3. Added mDNS TXT entries for HNAP services.

Copy from 1.03b01


Firmware: DIR865LA1_FW103B02.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/11/2

Problems Resolved:
1. base on 102B05 and update email max input as 128 characters.
2. Fix mdns packet(multicast packet) lose in 2.4G after several hours.


Firmware: DIR865LA1_FW103B02.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/11/2

Problems Resolved:
1. base on 102B05 and update email max input as 128 characters.
2. Fix mdns packet(multicast packet) lose in 2.4G after several hours.


Firmware: DIR865LA1_FW103B01.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/10/22

Problems Resolved:
1. Add pppoe/PPTP/L2TP NAT acceleration.
2. Fix mdns packet(multicast packet) lose in 2.4G after several hours.
3. After download config setting, then change setting and reboot. The management username/password will change to default(admin/blank).
4. Add mydlink API error check in wifi security setting.
5. [IPV6] Solve the problem that after setting IPv6 to PPPoE with create a new session, IPv4 Internet connection is changed to last time mode.
6. [IPV6] Solve the problem that while setting IPv6 to share with IPv4, DNS settings cannot be modified and the warning message is displayed.
7. [IPv6]Modify the behavior of dhcp6c as follows:
a. At first, we use ::/56 for default pd hint.
b. Then we use the last time pd hint if the connection is reconnected.


Firmware: DIR865LA1_FW102B05.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/10/02

Problems Resolved:
1. Fix http daemon would crash


Firmware: DIR865LA1_FW102B04.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/09/28

Problems Resolved:
1. Fix setup wizard
2. Fix ios6 post cache


Firmware: DIR865LA1_FW102B03.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/09/27

Problems Resolved:
1. Update Language Pack
2. Fix setup wizard
3. Enhance auto channel
4. Fix ios6.0 safari


Firmware: DIR865LA1_FW102B02.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/09/20

Problems Resolved:
1. Update Mydlink API from trunk
2. Change the default remote https management port to 8090
3. Enable GRE as build in not module
4. Enable pppoe paassthrough
5. fix Mydlink dns_query_log date display error
6. Update WFA from trunk


Firmware: DIR865LA1_FW102B01.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/08/31

Problems Resolved:
1. Fix 2.4G low throughput in noise env.
*enable frameburst.
*set acs_pol_idx=3
* set interference_override=4.

2. add QRS pro support.
3. Remove WPS auto disable if mac filter enable.
4. When Enable SPI,LAN PC still receive TCP packet from WAN PC.(DUT should drop "all" fake TCP packet) There is no any fake TCP packet incoming in the status\log page.
5. IPv6 user defined DNS show error on status page.
6. Fix IE8 sometime can not login issue.(if cookie already exist in http request,the login will fail)
7. New mydlink agent without event notification(VERSION=2.0.16-b5)
8. Can't use Https (Remote port 8181) even disable SharePort Web Access in storage function
9. User can't setting port forward to 1-8079 ,even disable SharePort Web Access function in STORAGE
10. Enhance NTFS write perfornance.
11. Support domain name Http://shareport.local to access web file access.


Firmware: DIR865LA1_FW101B07.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/07/23

Problems Resolved:
1. Fix auto reboot issue


Firmware: DIR865LA1_FW101B06.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/07/19

Problems Resolved:
1. Update WIFI power table


Firmware: DIR865LA1_FW101B05.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/07/16

Problems Resolved:
1. Run nvram erase to clear bootcode variable when upgrade bootcode in firmware
2. Implement AutoIP function in APC mdoe


Firmware: DIR865LA1_FW101B04.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/07/12

Problems Resolved:
1. Change the wording of some web page.
2. Auto reboot if the bootcode is upgrade in firmware
3. Fix 5G autochannel can use HT20 only in noisy environment


Firmware: DIR865LA1_FW101B03.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/07/11

Problems Resolved:
1. Fix auto channel in 5G can run HT20 only.
2. In router mode, we can enter to web by using http://dlinkrouter.local
3. Upgrade bootcode automatically if we detect the bootcode is not the newest one. After upgraded, the no. of session will become 36000
4. Fix APC connection problem


Firmware: DIR865LA1_FW101B02.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/07/05

Problems Resolved:
1. Start branch from this version.
2. Fix bug no.104,118,120,165,170
3. Implement STA WPS-PBC.

Know issue:
1. Bug171:[Mydlink] Use IPOHNE to change 5GHz security, after reboot 2.4GHz don't have any beacon
2. Bug48: [Help -Internet ] The internet of help file lost bridge mode.


Firmware: DIR865LA1_FW100B25.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/06/7

Problems Resolved:
1. Fix APC (pata mode) rekey fail when endurance test.
2. Fix APC is hard to connect to AP when AP change WIFI setting.
3. PPPOE passthrough function
4. Static route function fail
5. Fix anti-spoof not work.
6. Fix the device will save db without db changed after WPS success. We should not do db save if the setting is not change.

Know issue:
1. WPA-EAP not work
2. APC (pata mode) sometimes can not re-connect automatically in special steps.


Firmware: DIR865LA1_FW100B24.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/06/4

Problems Resolved:
1. Patch Broadcom NEW SDK (linux-2.6-router-6.30.39.2001.tar.gz).
2. Always set WPA rekey time to 78 hours.(work around rekey fail when endurance test)
3. Fix NAT throughput (DHCP ,static IP) is low (300Mbps) after version 1.00b17
4. Mydlink account is set once to enter the empty information, "Login" button showing the gray scale on WebGUI
5. Fix hping cause device reboot.

Know issue:
1. WPA-EAP not work
2. APC (pata mode) rekey fail when endurance test.
3. APC (pata mode) sometimes can not re-connect automatically.
           

Firmware: DIR865LA1_FW100B23.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/05/29

Problems Resolved:
1. Remove WPA auto.Only have WPA only and WPA2 only.Because WPA auto is not work now.
2. Correct Web access session timeout algorithm.
3. Default wps as configured.
4. Redirect to mydlink portal after success setting mydlink.

Know issue:
1. WPA-EAP not work


Firmware: DIR865LA1_FW100B22.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/05/29

Problems Resolved:
1. APC +  AP wifi 5G can reach 640 Mbps.
2. The APC status page show connect status.

Know issue:
1. WPA-EAP not work
           

Firmware: DIR865LA1_FW100B21.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/05/29

Problems Resolved:
1. APC can not site survey channel 12,13 when country code is content channel 1~13.(b20 not fix)
2. Remove dnsquery, event log setting on WEB UI. This entry is setting on mydlink portal.

Know issue:
1. WPA-EAP not work
2. AC throughput is not as good as Broadcom SDK F/W.


Firmware: DIR865LA1_FW100B20.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/05/28


1. APC can not site survey channel 12,13 when country code is content channel 1~13.
2. Fix mydlink sendmail fail using google mail.
3. default enable mydlink dnsquery.

Know issue:
1. WPA-EAP not work
2. AC throughput is not as good as Broadcom SDK F/W.


Firmware: DIR865LA1_FW100B19.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/05/27

Problems Resolved:
1. Fix WPA/WPA2 auto fail in APC mdoe
2. Modify power table provide from HW.

Know issue:
1.WPA-EAP not work.
2. Sometimes WIFI 5G beacon transmit stop or loss
3. AC throughput is not as good as Broadcom SDK F/W.


Firmware: DIR865LA1_FW100B18.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/05/23

Problems Resolved:
1. Fix WPS fail if device as enrollee
2. Remove TKIP+AES auto mode in APC mode.(driver not support)
3. Disable frameburst on 2.4G band.(just reference to Broadcom sdk config)
4. Fix APC site survey will lose 1 entry.
5. Fix QRS mobile can't set WIFI 5G .

Know issue:
1. WPA-EAP not work.
2. iphone sometime can't connect to WIFI 2.4G.
3. AC throughput is not as good as Broadcom SDK F/W.


Firmware: DIR865LA1_FW100B17.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/05/23

Problems Resolved:
1. Update mydlink agent to VERSION=2.0.15-b12
2. Fix event data (flag and version fied) error(mydlink report).
3. Fix kernel panic after setting access control.Now It is need boot after setting access control to take effect.
4. Remove TKIP+AES auto mode in APC mode.(driver not support)
5. Fix tool matrix21 test max session fail.

Known issue:
1. WPA-EAP not work.


Firmware: DIR865LA1_FW100B16.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/05/22

Problems Resolved:
1. Correct picture in wizard(cable not connect),smart404 error page,lld2d icon.
2. Add mfc wlan24g and mfc wlan5 for mfg.

Known issue:
1. WPA-EAP not work.


Firmware: DIR865LA1_FW100B15.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/05/21

Problems Resolved:
1. Fix AC low throughput issue,
2. Remove mydlink in APC mode.
3. Fix mydlink API security issue.(bug:API can get data without authentication )
4. Disable schedule function in APC wirelesee config.

Known issue:
1. WPA-EAP not work.


Firmware: DIR865LA1_FW100B14.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/05/21

Problems Resolved:
1. Enable wlan driver support test mode.(For HW verify wifi power.)
2. Fix mydlink block device fail.

Known issue:
1. WPA-EAP not work.


Firmware: DIR865LA1_FW100B13.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/05/21

Problems Resolved:
1. Fix device memory leak qhen enable QoS.
2. Fix mydlink status show blank wan ip in pppoe,pptp,l2tp mode.

Known issue:
1. WPA-EAP not work.


Firmware: DIR865LA1_FW100B12.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/05/19

Problems Resolved:
1. Fix APC password field disappear when WPA auto selected.

Known issue:
1. WPA-EAP not work.


Firmware: DIR865LA1_FW100B11.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/05/19

Problems Resolved:
1. Update mydlink agent from 2.0.15-b10 to 2.0.15-b11
2. Fix guest zone not work.
3. Fix android shareport mobile can't upload file.
4. Fix DHCP list do not show PC name.
5. remove APC mode security WPA only and WPA2 only,change to WPA AUTO.
6. Change PPP mode from dial on demeon to always after mydlink register success.
7. let device reboot when out of memory.
8. Remote management access fail.
9. WIFI station information error in 5G mode.
10. Change description when router mode change to bridge mode.
11. Remove orange blinking when F/W update.Because This is not in spec.
12. Current using random as auto channel.

Known issue:
1. WPA-EAP not work.


Firmware: DIR865LA1_FW100B10.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/05/18

Problems Resolved:
1. Fix Bridge mode do not using HT80 as default in A band.
2. Remove blinking orange led when F/W upgrade.
3. Fix the WAN port link speed can not work.
4. Other GUI bug following bugtracker.

Known issue:
1. Bridge mode wifi is not fine tune.
2. WIFI auto channel not work.
3. WPA-EAP not work.


Firmware: DIR865LA1_FW100B09.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/05/17

Problems Resolved:
1. Fix Access control url filter not work.
2. Modify power table for FCC request by HW RD.
3. Enable fastroute for USB performace.
4. Fix Bridge mode wifi can not connect to 2.4G.(add 5G/24G selection on UI)
5. Fix kernel BUG_ON cause bt stress test fail.(test bt again)
6. Update wizard language for some error checking message.
7. Fix disable 20/40 coexist not works.

Known issue:
1. Bridge mode wifi is not fine tune.
2. WIFI auto channel not work.
3. WPA-EAP not work.


Firmware: DIR865LA1_FW100B08.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/05/16

Problems Resolved:
1. Fix 5G AP not work in routermode.
2. Add mydlink event trigger.
3. Fix hidden page show WLAN 2 (5G)mac
4. Fix special char ", & ""can set to wifi ssid.


Firmware: DIR865LA1_FW100B07.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/05/16

Problems Resolved:
1. add bridge mode (WIFI is station mode only.But now is work on A band only)
2. bridge mode device have 192.168.0.50 management ip.
3. Modify wizard setup flow.
4. Modify auto detect timezone in wizard.
5. 5G wmm should not be config in AC mode.
6. Modify default guest zone ssid to dlink-guest and dlink-media-guest.
7. Fix web file access fail if the disk cache file damage.
8. FiX xbox360 can't discover device DLNA.
9.  Redirect any web access to wizard if device is factory


Firmware: DIR865LA1_FW100B06.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/05/16

Problems Resolved:
1. This version have kernel issue.Ignore this version.


Firmware: DIR865LA1_FW100B05.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/05/11

Problems Resolved:
1. Fix mydlink CGI get_Wireless form_wireless bug. When WPA mode  the get value display error.
2. Patch new Broadcom driver 6.30.39.13
3. Storage disk do not mount when pluged usb booting.
4. Correct model,hw,F/W version info on WEB access UI
5. Add pptp acceleration.
6. Change 5G wilreless mode "802.11ac only"to "Mixed 802.11ac"
7. Fix web file access(Storage) can not works.


Firmware: DIR865LA1_FW100B04.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/05/10

Problems Resolved:
1. Add mydlink wizard ,mydlink settion.
2. Fix WEP can not work on 2G and 5G band.
3. Fix new mini board(P307) can work with main board.
4. Add mfc init command with wifipassword parameter.if the wifipassword setting,the default ssid and password will as #5 rule.
5. Default wifi ssid is dlink-XXXX and dlink-midea-XXXX,XXX is wifi mac last 2 btye in hex string.(if wifipassword setted.)

Known issue:
1. web file access(Storage),Mydlink ????, ????.


Firmware: DIR865LA1_FW100B03.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: XXXXX

Problems Resolved:
1. We do not have 1.00b03 version.because some beta code have this name.

Note:
1. wireless through put is not fine tune.


Firmware: DIR865LA1_FW100B02.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/05/2

Problems Resolved:
1. add guest zone.
2. Add storage.(shareport mobile.)

Note:
1. wireless through put is not fine tune.


Firmware: DIR865LA1_FW100B01.bin
Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac)
Date: 2012/04/24

Problems Resolved:
1. First release

Note:
1. wireless through put is not fine tune.


P.S. Rilevati ancora problemi con la DWA-182 A1 risolti con le seguenti indicazioni:

Citazione di: Pondera il 16 Gennaio 2014, 09:26:30
Citazione di: 'D-Link Stati Uniti'Please try to uncheck auto channel scan and set a static channel. Please test channel 1, 6, 9 and 11.

Tolti tutti i collegamenti ai firmware precedenti.

Frigor

Salve a tutti.
Non so quanti lo sanno, ma questo router è in grado di far accedere ad internet attraverso il FACEBOOK WIFI.
Ovvero, installando il router in un luogo pubblico (o anche a casa), e dopo averlo associato alla propria pagina facebook, consente di collegarsi ad internet e di navigare registrandosi con il proprio account facebook...quindi senza bisogno di password da rilasciare all'utente.
Qualcuno di voi che lo possiede, ha notato se esiste una paginetta del menu del router in cui viene menzionato questo? oppure, come per il netgear compatibile con questo FACEBOOK WIFI, è disponibile un firmware apposito?
E poi: se volessi estendere il range del wifi con un RANGE EXTENDER...come potrei fare per allungare un wifi di questo tipo? l'extender mi dovrebbe comunque consentire di allacciarmi ad internet facendomi loggare a facebook...e sapevo che gli extender avevano bisogno di collegarsi in primis al wifi da estendere....

grazie mille, ciao a tutti.

andyonos

Buongiorno, ho il router in oggetto, da qualche settimana mi sta facendo impazzire. I miei device connessi in Wifi perdono il collegamento, per poi ricollegarsi dopo un paio di minuti. Questo avviene sia con il pc con la cam (dcs932l) e il telefonino e tablet....
Avevo l'ultimo fw installato ho provato a fare un downgrade ma il problema non si risolve..
Nel log del router non si vedono informazioni...  che faccio lo butto?
:@

Carciofone

Hai provato ad effettuare un reset?
Se non risolvi devi mandarlo in RMA e fartelo sostituire dal negoziante o direttamente da D-Link.

andyonos

Citazione di: C@rciofone il 07 Marzo 2014, 07:31:01Hai provato ad effettuare un reset?
Se non risolvi devi mandarlo in RMA e fartelo sostituire dal negoziante o direttamente da D-Link.
reset non ho provato, si fa via software?
il router l'ho acquistato ad aprile 2013... come funziona per l'assistenza..? se poi me lo tengono via 1 mese dovrei cmq comprarne uno in sostituzione... uff

Carciofone

Ti devi registrare sul sito dell'assistenza D-Link e chiedere direttamente il rientro in RMA che ti autorizzeranno per la sostituzione del router.

Licenza Creative Commons
Il contenuto dei messaggi del forum è distribuito con
Licenza Creative Commons Attribuzione Non commerciale 4.0
Tutti i marchi registrati citati appartengono ai legittimi proprietari