Menu principale

DIR-880L: Router Gigabit Cloud Dual Band AC 1900

Aperto da Pondera, 22 Giugno 2014, 10:17:14

Pondera

Pubblicata nota edizione cumulativa di riferimento al firmware DIR-880L A1 1.03 build 02_f1je 20150119.


DIR-880L Release Note

Firmware: DIR880A1_FW103WWb02_ f1je.bin
Date: 2015/01/19

1. Based on svn server version 405 for DRU request
2. Implement "offline information"
3. Let GUI do DF this query every "one minute" from USB drive.


Firmware: DIR880A1_FW103b01_ecnh.bin
Date: 2014/12/23

1. The firmware is similar as DIR880A1_FW103WWb01_ecnd.bin and just modifies the firmware name.


Firmware: DIR880A1_FW103FBb01_ecnf.bin
Date: 2014/12/23

2. The firmware is similar as DIR880A1_FW103b01fb_ecjk.bin and just modifies the firmware name.


Firmware: DIR880A1_FW103WWb01_ecnd.bin
Date: 2014/12/23

1. The firmware is the same as DIR880A1_FW103b01fb_ecjk.bin without FaceBook WiFi function
2. The firmware name includes "WW" means worldwide.


Firmware: DIR880A1_FW103b01fb_ecjk.bin
Date: 2014/12/19

1. Sync. to D-Link new GUI with SVN r401 version
2. Add the Facebook WIFI function


Firmware: DIR880A1_FW102b14_eci9.bin(Beta)
Date: 2014/12/18

1. Fix when use DSP-W215 connect to ap. will cause kernel wifi panic


Firmware: DIR880A1_FW102b13_ ebbe.bin
Date: 2014/11/11

1. D-Link Yillin requests the behavior of enable or disable "Reserve IP" in client Edit Rule of Home.html should be followed the latest D-Link new GUI. When "Reserve IP" is disabled, it would show the current client IP address in "IP Address" item. When "Reserve IP" is enabled, it would show the input item with client reserved IP in "IP Address (Reserved)".
2. This firmware is base on DIR880A1_FW102b12_ ebae.bin and modified the files of Home.html and ConnectedClients.js without commit.


Firmware: DIR880A1_FW102b12_ ebae.bin
Date: 2014/11/10

1. D-Link Yillin request to contain three functions of "For manually input DDNS server address, we now support NO-IP (DDNS server)",  "IPv6 auto detection works fine in 6rd environment, but router won't send DHCP Discover to DHCP Server after reboot" and "WAN ipv6 address should be none if wan type is auto detection with 6rd" base on DIR880A1_FW102b11_ eb3i.bin.
2. For "For manually input DDNS server address, we now support NO-IP (DDNS server)" Refer DIR880A1_FW102b04_beta.bin (Without Commit).
3. For "IPv6 auto detection works fine in 6rd environment, but router won't send DHCP Discover to DHCP Server after reboot" and "WAN ipv6 address should be none if wan type is auto detection with 6rd", refer
DIR880A1_FW102b02_e7sa.bin(1.IPv6 auto detection works fine in 6rd environment, but router won't send DHCP Discover to DHCP Server after reboot.),
DIR880A1_FW102b01_e7ge.bin(6.WAN ipv6 address should be none if wan type is auto detection with 6rd.),
DIR880A1_FW101b11_e6p9.bin(when connection type is 6rd and 6rd Configuration is 6rd DHCPv4 Option, if all /64 prefix assigned to LAN, WAN will have no ip address, thus we using wangateway to determine network is connected or not), and
DIR880A1_FW101b10_e6hg.bin(1. Select IPv6 internet connection type as 6rd, user cannot save setting without input IPv6 DNS server IP address. 2. IPv6 6rd status always show disconnected and LAN side cannot get IPv6 IP address.). All of them are not Commit.


Firmware: DIR880A1_FW102b11_ eb3i.bin
Date: 2014/11/03

1. D-Link Yillin request to contain two functions of wireless 20/40Hz coexistence and new DHCP reservation base on DIR880A1_FW102b10_ eavk.bin.
2. For wireless 20/40Hz coexistence, refer DIR880A1_FW102b01_e7ge.bin, SVN version r48118 and SVN version r47749 (Without Commit).
3. For new DHCP reservation, refer DIR880A1_FW102b05_e8rh.bin, DIR880A1_FW102b03_e7ve.bin, SVN version r49254, SVN version, SVN version r49091 and SVN version r48362 and modify /js/ConnectedClients.js (Without Commit).
4. Show the MAC information in client info. Modify Home.html and /js/ConnectedClients.js (Without Commit).


Firmware: DIR880A1_FW102b10_ eavk.bin
Date: 2014/10/31

1. D-Link request release a normal firmware.
2. Recovery to SVN version r47396 which is the last normal firmware (DIR880A1_FW101b09_e6ck.bin)
3. Solve the issue that port input field of port forwarding could not be 64536 ~ 64999 (version r47396 already done)
4. Modify Internet.html, Wizard.html and Wizard_Manual.html to set PPPoE with empty password (Without Commit)


Firmware: DIR880A1_FW102b09_ eauh.bin
Date: 2014/10/30

1. D-Link request release a normal firmware.
2. WEB is followed SVN r49417.
3. Webfile access and other code are latest SVN version.
4. Disable Facebook WiFi, Modify GUI to get the session storage of currneDevice
5. Modify Internet.html, Wizard.html and Wizard_Manual.html to set PPPoE with empty password


Firmware: DIR880A1_FW102b08_eaek.bin(Beta fw for DRU)
Date: 2014/10/14

1. For DRU, remove RC4-128 on MPPE encryption from web, only support RC4-40 when setting quick VPN


Firmware: DIR880A1_FW102b07_e9c8.bin
Date: 2014/09/12

6. Update power table for FCC new rule (WRGAC16_Power Table_20140909)


Firmware: DIR880A1_FW102b06_e99m.bin
Date: 2014/09/09

7. Sync. to main trunk followed D-Link WEB GUI SVN server with version r362


Firmware:DIR880A1_FW102b05_e8rh.bin(Beta)
Date: 2014/08/27

1. Solve the problem the hostname of client which used DHCP reservation IP would be empty after reboot.
2. Solve the problem the popup message would show "IP address can't be the same" if the DHCP IP of client was reservation and then set the nick name.


Firmware: DIR880A1_FW102b04_beta.bin (beta firmware)
Date: 2014/08/15

1. For manually input DDNS server address, we now support NO-IP (DDNS server).


Firmware:DIR880A1_FW102b03_e7ve.bin(Beta)
Date: 2014/07/31

1. The dhcpd daemon could not be executed if the hostname of DHCP reservation is empty.
2. Sync. to D-Link WEB SVN server with version r351


Firmware:DIR880A1_FW102b02_e7sa.bin
Date: 2014/07/28

1. IPv6 auto detection works fine in 6rd environment, but router won't send DHCP Discover to DHCP Server after reboot.


Firmware:DIR880A1_FW102b01_e7ge.bin(DIR880A1_FW102b01nc_e7ge.bin)(Beta)
Date: 2014/07/16

1. Sync. to D-Link WEB GUI SVN server with version 344.
2. Modify online help to http://dcms.dlink.com.tw/....
3. HT20/40 MHz Co-Exist Enable/Disable feature.
4. Add one return value for SetClientInfo HNAP action "ERROR_RESERVEIP_CONFLICT". If the GUI gets the return value, tell the user reservation IP is repeated.
5. OUI "C0-A0-BB" is not Cameo but D-Link. Modify MacList.js.
6. WAN ipv6 address should be none if wan type is auto detection with 6rd.
7. Solve the problem that happen kernel panic if enable guest zone when host zone is disabled. The guest zone use wrong profile to set host zone.


Firmware:DIR880A1_FW101b11_e6p9.bin(DIR880A1_FW101b11nc_e6p9.bin)(Beta)
Date: 2014/06/25

1. when connection type is 6rd and 6rd Configuration is 6rd DHCPv4 Option, if all /64 prefix assigned to LAN, WAN will have no ip address, thus we using wangateway to determine network is connected or not
2. Sync. the D-Link WEB SVN server with version r328.


Firmware:DIR880A1_FW101b10_e6hg.bin(DIR880A1_FW101b10nc_e6hg.bin)(Beta)
Date: 2014/06/17

1. Select IPv6 internet connection type as 6rd, user cannot save setting without input IPv6 DNS server IP address.
2. IPv6 6rd status always show disconnected and LAN side cannot get IPv6 IP address.


Firmware:DIR880A1_FW101b09_e6ck.bin(DIR880A1_FW101b09nc_e6ck.bin)
Date: 2014/06/12

1. Sync. the D-Link WEB SVN server with version r323.
2. Solve the problem of Russia PPP
3. Fixed issue of power led solid orange and DHCP server disappear after enable/disable DLNA server many times.


Firmware:DIR880A1_FW101b08_e6ac.bin(DIR880A1_FW101b08nc_e6ac.bin)
Date: 2014/06/10

1. Sync. the D-Link WEB SVN server with version r322.


Firmware:DIR880A1_FW101b07_e63e.bin(DIR880A1_FW101b07nc_e63e.bin)
Date: 2014/06/03

1. When countrycode = RU, add Internet Connection : Russia PPPoE, Russia PPTP, Russia L2TP in Internet page.


Firmware:DIR880A1_FW100MKb01_e5rb.bin(DIR880A1_FW100MKb01nc_e5rb.bin)
Date: 2014/05/27

1. Marketing firmware for PCHOME
2. Update SG 5G power table and add FCC Band1 new rule, default is disabled.


Firmware:DIR880A1_FW101b06_e5mk.bin(DIR880A1_FW101b06nc_e5mk.bin)(Beta)
Date: 2014/05/22

1. Solve the problem it could not login after 128 DoS shareport login attack.


Firmware:DIR880A1_FW101b05_e5cg.bin(DIR880A1_FW101b05nc_e5cg.bin)
Date: 2014/05/21

1. Solve the problem IPv6 could not save settings.
2. Sync. the D-Link web GUI with version r319.
3. Update SG and CN power.


Firmware:DIR880A1_FW101b04_e5cg.bin(DIR880A1_FW101b04nc_e5cg.bin)
Date: 2014/05/12

1. Solve the problem that WAN DHCP client could not update lease time.


Firmware:DIR880A1_FW101b03.bin(DIR880A1_FW101b03nc.bin)
Date: 2014/05/09

1. Allow connect to VPN service without to modify the windows registry
2. patch from broadcom to fix the ping lost and interference mitigation issue
3. sync. from dlink UI (svn r317)
4. Modified the return value of "enable" in GET MACFILTER to fit the spec. "mydlink API Specification v1.01 for Cloud Series.pdf".
5. support auto-ip in bridge mode


Firmware:DIR880A1_FW101b02.bin(DIR880A1_FW101b02nc.bin)
Date: 2014/05/05

1. Correct firmware version.
2. Sync. to D-Link latest GUI.
3. Add CE adaptivity parameters.


Firmware:DIR880A1_FW101b01.bin
Date: 2014/04/30

1. Modified version name from DIR880A1_FW100b50.bin


Firmware:DIR880A1_FW101b01nc.bin
Date: 2014/04/30

2. Modified version name from DIR880A1_FW100b50nc.bin


Firmware:DIR880A1_FW100b50.bin
Date: 2014/04/30

3. Compress the HTML, Javascript and CSS files for WEB.


Firmware:DIR880A1_FW100b50nc.bin
Date: 2014/04/30

4. Sync. to D-Link SVN server with GUI.


Firmware:DIR880A1_FW100b49.bin
Date: 2014/04/02

1. Compress the HTML, Javascript and CSS files for WEB.


Firmware:DIR880A1_FW100b49nc.bin
Date: 2014/04/02

5. In 2014Q2, Broadcom tell us we can enable 2.4G implicit tx beamforming.


Firmware: DIR880A1_FW100b48.bin
Date: 2014/03/20

1. Compress the HTML, Javascript and CSS files for WEB.


Firmware: DIR880A1_FW100b48nc.bin
Date: 2014/03/20

6. For 4708 B1D, enable hardware NAT will cause switch cannot send or receive packets.  patch from Broadcom to fix this issue.
7. Fix ipv6 bug, with manual configuration or DHCPv6 option, network status is displayed as Disconnected and a blank button is shown.
8. Fix ipv6 bug, after press "IPv6 release" button, the IPv6 info did not update.
9. Fix UI error, in IE11, the IPv6 release/renew button does not in correct css style in HOME page.


Firmware: DIR880A1_FW100b47.bin
Date: 2014/03/17

1. Compress the HTML, Javascript and CSS files for WEB.


Firmware: DIR880A1_FW100b47nc.bin
Date: 2014/03/17

1. Modify the web page for mobile.
2. Reboot device after website filter settings
3. When setting the NTP Server to "MANUAL" Mode, NTP Server address can't be empty.
4. Increase the Year that user can select in Manual Time Configuration.
5. Fix the bug of the ntpclient retry mechanism for sync time may fail if we enable ipv6 for NTP but didn't have ipv6 NPT server.
6. Fix LA 5g channel list for UI


Firmware: DIR880A1_FW100b46.bin
Date: 2014/03/12

1. Revert VPN modification, it is not work for IOS.


Firmware: DIR880A1_FW100b45.bin
Date: 2014/03/11

1. Upgrade ucode to fix rxchain powersave issue.


Firmware: DIR880A1_FW100b44.bin
Hardware: wrgac16 (bcm4708 + bcm4360 11gn + bcm4360 11ac)
Date: 2014/03/10

1. Fix the schedule issue. (how to explain 24:00)


Firmware: DIR880A1_FW100b43.bin
Date: 2014/03/06

1. Disable password AES encryption, for QRS mobile.


Firmware: DIR880A1_FW100b42.bin
Date: 2014/02/26

1. Fix HNAP misuses hmac_md5 calculation.
2. Correct kbit to kbyte in some languages (statistics page).


Firmware: DIR880A1_FW100b41.bin
Date: 2014/02/21

1. Update GUI for meeting request from D-Link.
2. Fix pppoe traffic skipping ctf.ko.


Firmware: DIR880A1_FW100b40.bin
Date: 2014/02/20

1. Fix CPU deadlock issue by skb_tcp_segment.
2. Firmware query string issue.


Firmware: DIR880A1_FW100b39.bin
Date: 2014/02/17

1. Fix wrong packets count and bytes in GUI.
2. VPN connection cannot access internet when WAN type is pppoe.


Firmware: DIR880A1_FW100b38.bin
Date: 2014/02/13

1. Update correct web icons from D-Link.
2. Add strRegion in firmware query string.
3. Add VPN configuration download.


Firmware: DIR880A1_FW100b37.bin
Date: 2014/02/11

1. Fix issue about cannot access device by using IPv6 address.


Firmware: DIR880A1_FW100b36.bin
Date: 2014/02/11

1. Update Paragon driver to fix deadlock issue.
2. Fix SSID appending "\n"  issue.


Firmware: DIR880A1_FW100b35.bin
Date: 2014/02/07

1. Add workaround to fix Paragon driver ufsd_write_inode calling linux writeback thread.
2. Fix some bridge mode issues.


Firmware: DIR880A1_FW100b34.bin
Date: 2014/01/28

1. Upgrade wireless driver to 6.37.14.62 for TX beamforming.
2. Update power table from hardware RD.


Firmware: DIR880A1_FW100b33.bin
Date: 2014/01/28

1. Add workaround to avoid command df blocking xmldb when using a broken disk.


Firmware: DIR880A1_FW100b32.bin
Date: 2014/01/27

1. Fix issue about Mydlink cannot register.
2. Sitesurvey cannot show correct signal strength.


Firmware: DIR880A1_FW100b31.bin (special)
Date: 2014/01/27

1. Update wireless driver to 6.37.14.62 for TXBF (a beta firmware, not commit yet).


Firmware: DIR880A1_FW100b30.bin
Date: 2014/01/24

1. Keep disk awake to avoid Paragon driver crash.
2. Command df blocks device when disk is broken.
3. Wizard cannot register mydlink.


Firmware: DIR880A1_FW100b29.bin
Date: 2014/01/23

1. Fix SAMBA change password issue.
2. Remove new GUI home page when bridge mode.


Firmware: DIR880A1_FW100b28.bin
Date: 2014/01/22

1. Merge UI code from D-Link.
2. Add reboot behavior for configuring Broadcom's HW NAT.


Firmware: DIR880A1_FW100b27.bin (special)
Date: 2014/01/22

1. Enable FCC and CE for 5g band3 and 2.4g channel 13.
2. Change phy_ed_thresh from -63 to -73.
3. Use the Broadcom patch for weather radar detection test.
4. Apply patch for DFS CCTT.


Firmware: DIR880A1_FW100b26.bin
Date: 2014/01/21

1. Enable GRO for SAMBA write performance.
2. Enable CTF for pppoe to avoid deadlock issue.
3. Disable HW NAT when WAN type is ppp4 because HW NAT not support it.


Firmware: DIR880A1_FW100b25.bin
Date: 2014/01/16

1. Disable GRO to avoid CPUs deadlock issue.


Firmware: DIR880A1_FW100b24.bin (special)
Date: 2014/01/14

1. Enable FCC and CE for 5g band3 and 2.4g channel 13.
2. Change phy_ed_thresh from -63 to -73.
3. Use the Broadcom patch for weather radar detection test.


Firmware: DIR880A1_FW100b23.bin
Date: 2014/01/10

1. Fix encrypted password issue in APC mode.
2. Modifiy LEDs behavior to meet D-Link spec.
3. Fix encrypted password issue in mobile web page.


Firmware: DIR880A1_FW100b22.bin
Date: 2014/01/09

1. Fix encrypted password bug.
2. Update power table.
3. Fix web page cache issues.


Firmware: DIR880A1_FW100b21.bin
Date: 2014/01/08

1. Fix VPN bug.
2. Fix wrong mount option in Silex (cannot remove folder).
3. Fix UI bugs.
4. Fix IPv6 bugs.
5. Fix device web home page error in IE.


Firmware: DIR880A1_FW100b20.bin
Date: 2014/01/07

1. Merge new GUI from DIR868L.


Firmware: DIR880A1_FW100b19.bin
Date: 2013/12/31

1. Fix kernel oops when HD from spin-down to spin-up.
2. Fix some VPN issues.


Firmware: DIR880A1_FW100b18.bin
Date: 2013/12/24

1. Improve samba throughput.
2. Add paragon driver for NTFS.


Firmware: DIR880A1_FW100b17.bin (special)
Date: 2013/12/24

1. Enable FCC and CE for 5g band3 and 2.4g channel 13.
2. Change phy_ed_thresh from -63 to -73.
3. Release to Sporton for adaptivity testing


Firmware: DIR880A1_FW100b16.bin
Date: 2013/12/18

1. Fix statistic information pages.
2. Fix bridge mode issues.
3. IP collision issues.


Firmware: DIR880A1_FW100b15.bin
Date: 2013/12/17

1. Disable devdata erasing in "mfc init" command, avoid to clean txbf parameters in F1.
2. Disable mfc mode after "mfc init".
3. Enable implicit TX beamforming.


Firmware: DIR880A1_FW100b14.bin
Date: 2013/12/11

1. Fix device webpage freeze issue (bridge mode and setting QOS)  


Firmware: DIR880A1_FW100b13.bin
Date: 2013/12/09

1. Update LEDs (for new hardware)
2. Update WIFI parameters (5G PA curve)  
3. Fix a lot of UI bugs


Firmware: DIR880A1_FW100b12.bin
Date: 2013/11/29

1. Add AP client mode
2. Enable jumbo frame
3. Disable ctf acceleration (HW-NAT) for pppx
4. Fix tons of UI bugs


Firmware: DIR880A1_FW100b11.bin (special)
Date: 2013/11/27

1. Enable FCC and CE for 5g band3 and 2.4g channel 13
2. Release to Sporton for testing


Firmware: DIR880A1_FW100b10.bin
Date: 2013/11/20

1. Fix a lot of UI bugs
2. Release to LAB


Firmware: DIR880A1_FW100b09.bin
Date: 2013/11/15

1. Add implict txbf calibration parameter in mfc block


Firmware: DIR880A1_FW100b08.bin

Date: 2013/11/14

1. Enable hardware NAT


Firmware: DIR880A1_FW100b07.bin
Date: 2013/11/13

1. Upgrade to SDK 6.37.14.56
2. Update board limit setting


Firmware: DIR880A1_FW100b06.bin
Date: 2013/11/01

1. Add station mode
2. Update PA curve
3. Update FCC power table
4. (For HW tests TX bramforming)


Firmware: DIR880A1_FW100b04.bin
Date: 2013/10/07

1. Enable 2.4G 256QAM feature.


Firmware: DIR880A1_FW100b03.bin
Date: 2013/09/30

1. Upgrade SDK from 6.37.14.0 to 6.37.14.49
2. Update new PA curve parameters.
3. Enable 5g band 2 and band 3 for H/W test power.


Pondera

Aggiunti nel 1° messaggio di questa discussione collegamenti al progetto firmware gratuito alternativo DD-WRT relativi al DIR-880L A1.

Entheos

Ma dal firmware D-Link DIR-880L A1 1.03 build 02_f1je 20150119 non è possibile disabilitare la funzione WPS.

Pondera

Pubblicato firmware DIR-880L A1 1.03 build 10_f3rf 20150327.

Fonte D-Link Forums
Citazione di: 'mtztraktoros'Hi!

Here comes the newest fw:
https://drive.google.com/file/d/0B5lW5LRWpQcHN3l0dXd0MGw3cWs/view?usp=sharing
please test it!

Pondera

Pubblicato firmware DIR-880L A1 1.03 build 07_f3bi 20150311.

Pondera

Con l'opzione Smart Connect (connessione intelligente) il router gestisce in maniera automatica il collegamento senza fili fra le bande di frequenza di 2,4 & 5 GHz

Fonte D-Link Italia
e collega automaticamente alla migliore e più libera ogni dispositivo presente in rete, per avere in ogni momento il collegamento di qualità più alta.


Da come risulta da questa tabella di Marzo 2015 pubblicata da D-Link USA dovrebbe essere disponibile per il modello DIR-880L A1 da questo mese di Aprile 2015.
Compare a partire dal firmware DIR-880L A1 1.03 build 07_f3bi 20150311.




Pondera

Aggiunto nel 1° messaggio di questa discussione emulatore DIR-880L A1 1.01 2014-05-05.

Pondera

Pubblicato firmware DIR-880L A1 1.04 build 01 20150419.


DIR-880L Firmware Patch Notes

Firmware: FW1.04.B01
Hardware: A1
Date: 2015/04/19

Note:
None

Problems Resolved:
• Fixed Security vulnerabilities as described on [SAP10054]
- HNAP Privilege Escalation
- Command Injection
For details visit:
http://securityadvisories.dlink.com/security/publication.aspx?name=SAP10054

Enhancements:
None

Known Issues:
None


P.S. Smart Connect presente.


Pondera

Pubblicato firmware DIR-880L A1 1.03 build 11_f41b 20150401.


DIR-880L Firmware Release Notes
===============================

Hardware: A1
Firmware: v1.03b11
Date:     01/04/2015

Problems Resolved:
1. Update to new Web UI version
2. Fix guest zone issue
3. Revise behavior of DHCP reservation
4. Add PPPoE MAC clone

Enhancements:
1. Support D-Link Smart Connect (Single SSID/Network Name)

Pondera

Fonte TrustedReviews
D-Link DIR-880L – Features
In hopping aboard the AC1900 bandwagon the 880L plays some familiar cards: a full fat 1300Mbit 802.11ac implementation with 3x3 antenna array and bolstered 600Mbit 802.11n which leads to the enlarged 'AC1900' figure.

How the latter figure is achieved is by 'Turbo QAM', a proprietary technology from Broadcom used to boost 802.11n on the ageing 2.4GHz band. The snag is it requires a Turbo QAM compatible wireless receiver to reap the benefits on this [...]. The good news is with the wealth of AC1900 routers appearing many more Turbo QAM receivers are in the works.

But Turbo QAM isn't the 880L's only trick. Its three 5dBi dual-band dipole antennas are significantly larger than anything we've seen on any rival router (which usually stick to 3Bi) and they are backed by SmartBeam compliance.

Pondera

Pubblicato firmware DIR-880L A1 1.05 build 01_f73b 20150703.


DIR-880L Firmware Patch Notes

Firmware: FW1.05.B01
Hardware: A1
Date: 2015/07/16

Note:
None

Problems Resolved:
• Fixed Security vulnerability
- UPnP Buffer Overflow
- HTTP Buffer Overflow
For details visit:
http://securityadvisories.dlink.com/security/publication.aspx?name=SAP10060

Enhancements:
None

Known Issues:
None

Ziobill

buonasera, ho acquistato da poco questo router, e volevo chiedere alcune delucidazioni al riguardo:

- Posso montare una delle antenne  al piano inferiore della mia abitazione, in quanto il segnale Wi-Fi non mi copre tutto il piano, collegata con un cavo di qualche metro? Se si, quale delle 3 oppure é indifferente.

- Perché non mi rileva gli aggiornamenti di fatto elencati su questo forum io sono fermo alla 1.02 ma non mi rileva i successivi. Posso aggiornarli in manuale. Il mio hardware é A1

- alla porta wan é collegato un Hag FASTWEB. Mi conviene ripetere le porte forwardate sul router, oppure aprirle tutte sull'hag e forwardarte solo sul router.

Mi sono reso conto che sull'hag non si entra, presumo che sia bloccato. É un Pirelli.

Grazie

Pondera

Pubblicato firmware DIR-880L A1 1.05 build 02_f7hb 20150717.

DE Release Notes


DIR-880L Firmware Release Notes

Firmware: FW v1.05
Hardware: Rev. Ax
Date: July 30 , 2015

Enhancement:
1. Close a public disclosed potential vulnerability.
2. Improve Smart Connect functionality.
3. QoS Maximum bandwidth is now configurable.

Problem Resolves:
1. Resolve login UI issue while captcha enabled.
2. Resolve a multicast issue for Russia IPTV.




US Release Notes


DIR-880L Firmware Release Notes

Firmware: FW1.05.B02 (Release)
Hardware: A1
Date: 2015/09/02

Notes:
None

Problems Resolved:
1. Resolve login UI issue while captcha is enabled
2. Resolve multicast issue
3. Fixed the following Security Vulnerabilities:
- HNAP Privilege Escalation
- Command Injection

Enhancements:
1. Improve Smart Connect Functionality
2. QoS Maximum bandwidth is now configurable

Known Issues:
None

Pondera

@Ziobill
Aggiorna manualmente all'ultimo firmware che trovi nel 1° messaggio della discussione.
Meglio lasciare le antenne al loro posto e prendere un ripetitore.

Ziobill

Grazie Pondera,
ho installato l'ultimo firmware 1.05 b1 fino a ieri sera tutto ok, vista la tua segnalazione di un nuovo aggiornamento, ieri sera ho installato la versione 1.05 b2.
Stamattina, assenza internet, assenza rete, Ho spento il router, riacceso; tutto ok! Penso sarà stato un caso!
Intorno alle 11, mio figlio mi chiama al cellulare, Non c'è internet, non c'è rete; IO: spegni e riaccendi il router, spegni e riaccendi l'Hag di Fastweb, ad operazione conclusa, tutto OK!
Ero tanto preso da problematiche d'ufficio, che non mi sono soffermato più di tanto, tempo 5 minuti, mi richiama mio figlio: Papi idem come prima,. ho provato a spegnere e accendere il router, rimane accesa sempre la spia rossa e non va avanti!
IO: collega il portatile all'hag con un cavo ethernet e vai avanti; torno stasera e controllo.
Penso. mi sa che l'ultimo firmware è baggato, il router dopo un pò si inchioda.
Rientro a casa, dopo una serie di accendi e spegni, riesce a partire, subito flasho  il firmware precedente, ma il problema rimane. lo usi un pò e poi inchidamenti continui e impossibilità di avviare il router. si inchioda con la spia rossa accesa e non si avvia.
Alla fine si avvia ...  salvo la configurazione, lo impacchetto e rimonto il vecchio netgear wnr3500.
Domani lo consegnerò per la sostituzione.
Sfortuna, oppure i router di oggi non sono più come quelli di una volta?? troppa plastica!!
Ero indeciso fra il D-link DIR-880L e  l'ASUS RT-AC68U.

Ho Fatto bene la mia scelta????
Ziobill

Pondera

I nuovi router e modem-router (di tutte le marche nessuno escluso!) in generale sono "più chiusi" dall'esterno rispetto ai modelli precedenti per non permettere ai nuovi malware che sono usciti in questi ultimi due anni di prendere in gestione la connessione casalinga. Tutte le nuove problematiche che abbiamo riscontrato qui sul forum sono quasi sempre riconducibili a questo fattore.
Nel tuo caso bisogna per forza valutare con delle prove perché hai pure Fastweb (se hai l'HAG dovresti avere la fibra) e a distanza non è mai facile individuare il problema in poco tempo.

Pondera

Pubblicato firmware DIR-880L Ax 1.06 build 01_fbkf 20151120.


DIR-880L Firmware Release Notes

Firmware: FW v1.06
Hardware: Rev. Ax
Date: December 2, 2015

Enhancement:
1. Supporting hardware version A2.

Pondera

Pubblicato firmware DIR-880L Ax 1.07beta build 06_g2je 20160219.

Licenza Creative Commons
Il contenuto dei messaggi del forum è distribuito con
Licenza Creative Commons Attribuzione Non commerciale 4.0
Tutti i marchi registrati citati appartengono ai legittimi proprietari