Menu principale

DIR-890L: Router Gigabit Cloud Tri-Band AC 3200

Aperto da Pondera, 04 Maggio 2015, 08:59:56

Pondera

I collegamenti a me funzionano.
In ogni caso metti l'ultimo firmware in evidenza consigliato nel 1° messaggio che è più recente ancora. Sembra che i problemi di caduta del collegamento senza fili siano stati risolti. Se hai ancora problemi provvedi a disattivare l'opzione di collegamento intelligente (Smart Connect). Facci sapere in ogni caso.

maxone78

Scusa ancora,mi risulta impossibile aprire un qualsiasi link.

Pondera

Non è che per caso usi uno smartphone/tablet Android? Perché l'app Internet non aggiornata non è in grado di aprire i link FTP.

maxone78

Ho provato da edge ed explorer su pc windows e safari da mac. Purtroppo nulla.....

Pondera

Allora può essere che dipenda dal tuo fornitore di servizio Internet: evidentemente hai qualche operatore mobile che rilascia indirizzi IP riservati ai propri sottoscrittori, ma non sapevo esistessero delle restrizioni per quanto riguarda gli accessi FTP.

Ti carico l'ultimo firmware su un servizio di archiviazione temporanea in Rete, resterà attivo per i prossimi due giorni. Clicca sul logo del servizio di seguito per andare sulla pagina di scaricamento poi premi il pulsante celeste [Download Files].
Se riscontri ancora problemi continua a farci sapere che cerchiamo di trovare un'altra soluzione. ;)  




P.S. Non c'è bisogno di rispondere ai messaggi precedenti con la citazione: appesantisce la lettura ed è un uso ridondante di collegamenti che il servizio di allocazione (hosting) del forum ci bacchetta. :D

maxone78

Grazie.
Sono riuscito a scaricare.
Appena avro' installato postero' le mie impressioni

Pondera

Pubblicato firmware DIR-890L Ax 1.11 build 02_beta01 20170519.


DIR-890L/R Firmware Patch Notes

Firmware: FW1.11b02_beta01
Hardware: A1 Date: 2017/05/19

Note:
Reported by: Igor Kirillov (i.kirillov at embedi dot com) from Embedi

Problems Resolved:
1. Cgibin file incorrectly parses parameters sent by POST-request thus it allows an unauthorized user to execute php-sqript which discloses admin login and password.

Enhancements:
None

Known Issues:
None

Pondera

Pubblicato firmware DIR-890L Ax 1.20 build 01 20170927.
N.B. Occorre aggiornare prima alla versione di transizione DIR-890L Ax 1.11 build 04 20170925 contenuta nel pacchetto.

Nota edizione EU

DIR-890L Firmware Release Notes

Firmware: FW v1.11b04
Hardware: Rev. A1
Release Date: 2017/10/3

Note:
1. The firmware v1.11b04 is the transitional version for upgrading to v1.20b01 or later version.
2. Below is the procedure for firmware upgrade:
• Connect to the router via LAN port or WIRELESS interface.
• Log in to the D-Link management page (http://192.168.0.1 or http://dlinkrouter.local./)
• Go to the firmware upgrade page, upload the firmware v1.11b04 and wait for the device to reboot.
• Log in to the D-Link management page again.
• Go to the firmware upgrade page and check the button of online firmware check and download the firmware v1.20b01 or later version.
• Upload the firmware v1.20b01
• Wait for the device to reboot and don't power off the router during the firmware upgrade.
• The router is fully upgraded. For the detailed information, please refer to the firmware release note of v1.20b01.



DIR-890L Firmware Release Notes

Firmware: FW v1.20b01
Hardware: Rev. A1
Release Date: 2017/10/3

Note:
1. The firmware version is advanced to v1.20
2. The firmware v1.20b01 must be upgraded from the transitional version of firmware v1.11b04.

Problems Resolved:
1. Fixed the security issues reported by Embedi.com on Sep 12th ,2017.
Issue 1) Command Injection in http://192.168.0.1/getcfg.php
Issue 2) Stack overflow HNAP in http://192.168.0.1/HNAP1/
Issue 3) Command Injection for "EXEC REBOOT SYSTEM" command for service jcpd.





Nota edizione DE cumulativa

DIR-890L Rev.A Release Note


Firmware: FW 1.20b01
Release Date: 2017/10/3

Note:
1. The firmware version is advanced to v1.20
2. The firmware v1.20b01 must be upgraded from the transitional version of firmware v1.11b04.

Problems Resolved:
1. Fixed the security issues reported by Embedi.com on Sep 12th ,2017.
Issue 1: Command Injection in http://192.168.0.1/getcfg.php
Issue 2: Stack overflow HNAP in http://192.168.0.1/HNAP1/
Issue 3: Command Injection for "EXEC REBOOT SYSTEM" command for service jcpd.

---------------------------

Firmware: FW 1.11b04
Release Date: 2017/10/3

Note:
1. The firmware v1.11b04 is the transitional version for upgrading to v1.20b01 or later version.

---------------------------

Firmware: 1.11b02_gbii
Date: 2016/11/18

Changes:
1. Fix internet connection issue when WAN type is Dynamic IP and WAN subnet mask is 255.255.255.255

---------------------------

Firmware: 1.11b01_g97i
Date: 2016/09/07

Changes:
1. Fix HNAP Service Stack-Based Buffer Overflow Vulnerability
CWE-121 CVE-2016-6563 VU#677427
http://www.kb.cert.org/vuls/id/677427

---------------------------

Firmware: 1.10b07
Date: 2016/05/24

Enchancement:
1. USB performance enhancement.
2. WiFi stability enhancement.
3. iQoS supporting.
4. VLAN support for internet access.
5. IPv6 6in4 improved.

---------------------------

Firmware: 1.10b02-02_g37i
Date: 2016/03/07

Changes:
1. Fix DHCP Reservation and Parental Corntrol.
Max number of DHCP Reservation rules = 24
Max number of Paretal Corntrol rules = 24

---------------------------

Firmware: 1.10b02
Date: 2016/02/04

Changes:
1. Mix Microsoft Edge issue.

Enchancement:
1. New QoS Setup
2. Add WPS-PBC on/off function. Default is on.
3. Add WPS-PIN lock/unlock function. Lock is off - Unlock is on. Default is off.

---------------------------

Firmware: DIR890A1_FW108b04.bin
Date: 2015/07/14

Changes:
1. Solve the issue that the client number would become zero in client information sometimes.
2. Mobile phone Samsung S6 Internet slow [HQ20150702000007]
3. Fixed Security vulnerability
- UPnP Buffer Overflow
- HTTP Buffer Overflow
For details visit: http://securityadvisories.dlink.com

---------------------------

Firmware: DIR890A1_FW108b03.bin
Date: 2015/07/07

Changes:
1. Apply Broadcom's group key sync patch between driver and hardware. [DUSA Webber's problem]

---------------------------

Firmware: DIR890A1_FW108b02.bin
Date: 2015/07/03

Changes:
1. Using different transaction IDs when doing DNS query.
2. Avoid query same DNS server twice at the same time.

---------------------------

Firmware: DIR890A1_FW108b01.bin
Date: 2015/06/30

Changes:
1. [Bug Fix] UI shows IPv6 WAN type as Auto detection after setting Link-local when WAN ethernet is not connected.
2. Increase the length of PPTP/L2TP server address characters to 32.
3. DHCP change to Unicast by default(Disable Always Broadcast in DHCP server settings) in Network.html.
4. [IP reservation] In some situation, the reserved IP will be given to another client. (Sync from main trunk)
5. Change IPv6 default mode back to auto detection.

---------------------------

Firmware: DIR890A1_FW107b12.bin
Date: 2015/06/26

Changes:
1. Fix that 802.11n (5GHz) devices are still able to connect DIR-890L.The r49935 have solved about 2.4g kind of 802.11n problem before, but the 5g band use the same rule cause to the ac only can still connect with 802.11n.
2. BTD2015041149 [Wizard] After default wizard finished, sometimes the 5G wireless settings are not changed.
a. remove 'Reboot' function.
b. restart WIFI service after SMARTCONNECT service restarted.
c. add timer for SMARTCONNECT service.
3. Restart IPv6 protocol stack in IPV6ENABLE event.To send IPv6 DAD in booting, we do not enable IPv6 protocol stack when starting PHYINF.ETH-X services.
4. For Russia, set IPv6 default mode to Link Local

---------------------------

Firmware: DIR890A1_FW107b11.bin
Date: 2015/06/09

Changes:
1. Reduce expiration time of SCB pending, improve 43602 memory usage.

---------------------------

Firmware: DIR890A1_FW107b10.bin(beta)
Date: 2015/06/05

Changes:
1. Fix some security issue from D-Link DIR-868L security report
2. Fix bug of kernel panic when enable Qos and connect to guest zone
3. fix bug of Parental Control in Home page will disappear
4. Fix SharePort plus not work issue.
5. Resolve few types of video file can't be identified by DLNA.
6. Allow L2TP and PPTP can input domain name into Server IP Address field.

---------------------------

Firmware: DIR890A1_FW107b09.bin
Date: 2015/05/26

Changes:
1. Fix issue that wireless client identify icon doesn't correct.

---------------------------

Firmware: DIR890A1_FW107b08.bin
Date: 2015/05/25

Changes:
1. Fix issue that wireless client identify icon doesn't correct.

---------------------------

Firmware: DIR890A1_FW107b07.bin
Date: 2015/05/22

Changes:
1. Fix command injection by upnp m-search method.
2. Update QOS alert message for DUSA.
3. Update Russian translation.
4. Cannot use ipv6 address to login device web page with https when device using ipv6 static setting.
5. Reserve IP not work. [DEUR20150504000010-North Europe]
6. Fix SharePort plus not work issue.
7. Fix "IP address cannot be the same" message at wrong position.
8. Fix issue the clients disappear and re-appear in 3-5 sesonds on UI.
9. Resolve few types of video file can't be identified by DLNA.

---------------------------

Firmware: DIR890A1_FW107b06.bin
Date: 2015/05/18

Changes:
1. Apply 2 Broadcom's patches to fix 43602 firmware crash issues. [drop-expired-ampdu-rx-pkts.diff], [ignore_amsdu_ptks_with_invalid_scb.diff].
2. Fix wireless client band info at wrong position.
3. [DEUR20150429000011-Central Europe] UI only shows one USB drive when user plugs 2 USB drives.

---------------------------

Firmware: DIR890A1_FW107b05.bin
Date: 2015/05/14

Changes:
1. Fixed: IPv6 firewall still not works when setting IPv6 Firewall Rules to "Turn IPv6 Filtering ON and ALLOW rules listed".
2. Fixed STA band message overlay.

---------------------------

Firmware: DIR890A1_FW107b04.bin (beta firmware)
Date: 2015/05/13

Changes:
1. Add band information of wireless station in web UI Homepage.

---------------------------

Firmware: DIR890A1_FW107b03.bin
Date: 2015/05/12

Changes:
1. Fix IPv6 ingress filtering didn't work. When we modify setting and reboot, the setting lost.

---------------------------

Firmware: DIR890A1_FW107b02.bin
Date: 2015/05/07

Changes:
1. Modify some wifi parameters for 2.4g interference mitigation.
2. Fix driver (43602) crash issues [memory leak and driver trap].
3. Fix schedule not work properly [BTD2015030934].
4. Use buffer length checking memory manipulation in HNAP CGI.
5. Fix IP CAM (DCS-5029) cannot connect with WPA/PSK.
6. Add QOS bandwidth setting help message.
7. Modify QOS bandwidth from Kbps to Mbps.
8. Fix QOS has too low throughput than bandwidth setting.
9. Fix IPv6 firewall issue [DUSA20150506000001].
10.  Rollback mydlink agent to 2.0.18-b25, avoid DLNA cannot list video files.

---------------------------

Firmware: DIR890A1_FW107b01.bin
Date: 2015/04/24

Changes:
1. Change smart connect setting will reboot DUT
2. Fix Host zone Smart connect setting would be modified via Guest zone
3. Avoid system hang (served, xmldb)

---------------------------

Firmware: DIR890A1_FW106b06.bin(beta)
Date: 2015/04/29

Changes:
1. fix the DNS server in LAN can't access internet issue

---------------------------

Firmware: DIR890A1_FW106b04.bin
Date: 2015/04/17

Changes:
2. The connected client number should not count the offline client but only connecting client.
3. 12 noon should not show 00:00 PM but 12:00 PM for D-Link OBU requestment.
4. Solve the cache issue with different firmware version.
a. add missing timestamp for some pages.
b. replace 'ini_ver' with timestamp.
4. Take care SetOperationMode implemented into SetMultipleActions.php to make sure QRS Mobile could work well.
Now DIR-890L only support wireless Router mode and wireless AP mode.
5. Prevent HNAP GetDeviceSettings command injection
  a. Replace strstr function with strcmp function to check HNAP GetDeviceSettings to prevent command injection
  b. Replace sprintf function with snprintf function to prevent the buffer overflow security issue.

---------------------------

Firmware: DIR890A1_FW106b03.bin
Date: 2015/04/10

Changes:
1. [BTD2015031091] [mydlink lite] Skip setup wizard and register mydlink, before DUT reboot the mydlink lite can't access DUT.
2. Fix WOL(wake on lan) not work
3. Set 802.1x to highest priority
4. Solve the issue the captcha login could not work well.
5. a.Extend reciprocal number to prevent sometimes the remote management will fail after saving settings serval times.
b.remote access should be changed to http while https server is disabled.
6. BCM patch to fix the memory leak problem
7. Update 43602 firmware for "BCM patch to fix the memory leak problem".
8. Solve the port forwarding issue
  a. DIR_890_port forwarding rule issue[DUSA20150311000004-Canada]
  b. DIR-890L Doesn't allow port forwarding with a single TCP or UDP port, but it does allow forwarding both![DUSA20150409000001-USA]
9. Work around the issue from D-Link OBU: Change MTU to 1300 and change back to 1492, MTU still 1300 actually after save settings. Reboot will resolve this issue.
10. NVR (beta) agent added in firmware, and no LAB test

---------------------------

Firmware: DIR890A1_FW106b02.bin
Date: 2015/03/25

Changes:
1. Modify client information in Home.html
a. Show the "OFFLINE" style for DHCP reservation client in Home.html if it is not connected to router now.
b. Add the "Add client DHCP reservation card add" to follow the D-Link New GUI design.
c. Add the error check if the DHCP reservation IP is conflict to another current client IP address.
2. Update wireless network interface card firmware. ([devel] We remove some mfg features from 43602 firmware. It should not be in normal firmware.)

---------------------------

Firmware: DIR890A1_FW106b01.bin
Date: 2015/03/20

Changes:
1. Checkout code from SVN server
2. fix when wan type is static, WAN LED turn to amber after unplug and plug in WAN Ethernet cable
3. fix the dhcpd daemon could not be executed if the hostname of DHCP reservation is empty
4. Add the error check if the reserve IP is not belonging to LAN IP
5. Apply BCM patch to fix the low signal power issue

---------------------------

Firmware: DIR890A1_FW105b04.bin
Date: 2015/03/17

Changes:
Base on DIR890A1_FW105b03.bin
1. BTD2015030846  [security] To set Primary SSID security as WEP and Guest security as WPA-PSK, then STA can not connect to Guest SSID.
   SVN update aries/dlink.2013gui/services/SMARTCONNECT.php r52377
2. BTD2015030514 [AP mode] Can't access http://192.168.0.50 after saving any shreaport function
  SVN update aries/progs/htdocs/hnap_ui/SetStorageUsers.php r52815
3. BTD2015030828 [AP+MAC Clone] MAC clone can't work on AP mode(DHCP/Static IP)
  SVN update aries/dlink.2013gui/dir890/htdocs/web/Internet.html r52817
4. BTD2015030839 [Web UI][Guest zone] Can't disable 'Internet Access Only' function.
  SVN update aries/dlink.2013gui/dir890/htdocs/web/GuestZone.html r52824

---------------------------

Firmware: DIR890A1_FW105b03.bin
Date: 2015/03/16

Changes:
Base on DIR890A1_FW105b02.bin
1. SVN update
aries/dlink.2013gui/dir890/htdocs/web/js/ initialJQ.js r52279
2. Solve the bugs in bug tracker
BTD2015030732 [Wizard] Default wizard can't work or cancel

---------------------------

Firmware: DIR890A1_FW105b02.bin
Date: 2015/03/13

Changes:
Base on DIR890A1_FW105b01.bin
1. SVN update
aries/dlink.2013gui/dir890/htdocs/web/GuestZone.html r52764
aries/dlink.2013gui/dir890/htdocs/web/Home.html r52189
aries/dlink.2013gui/dir890/htdocs/web/Wizard.html r52370
aries/dlink.2013gui/dir890/services/LAYOUT.php r52780
aries/progs/htdocs/hnap_ui/SetUSBStorageSettings.php r52246
aries/progs/htdocs/hnap_ui/SetWanSettings.php r52780
aries/progs/htdocs/hnap_ui/SetSmartconnectSettings.php r52779
2. Solve the bugs in bug tracker
BTD2015030293 [WebUI+Guest+Schedule] Enable primary and guest wifi by schedule, guest wifi can work well but it shows disabled on guest zone page
BTD2015030303 [Web UI] Enable guest zone with none security, after save the setting the password fiels will be grayed.
BTD2015030449 [WebUI+Guest] Guest SSID textbox need fool proof(null SSID can be saved but guest wifi won't work)
BTD2015030467 [AP mode+IP setting] Change DUT's IP mode(Static/DHCP) but it need reboot to tack effect.
BTD2015030512 [AP Mode+DHCP] Enable DLNA on AP mode, then DUT's DHCP server will be enabled
BTD2015030514 [AP mode] Can't access http://192.168.0.50 after saving any shreaport function
BTD2015030517 [CN+Wizard] Check internet connectivity will fail when WAN detect DHCP mode
BTD2015030621 [AP+Wireless] Enable guest zone then change to AP mode, primary and guest wifi will become none security
BTD2015030626 [Guest+security] Can't change security from WPA to None security





Nota edizione US

DIR-890L Firmware Release Notes

Firmware: FW v120b01
Hardware: Rev. A1
Release Date: 2017/10/2

Note:
1. The firmware version is advanced to v120b01
2. The firmware v120b01 must be upgraded from the transitional version of firmware v111b04.

Problems Resolved:
• Fixed the following security issues
• Add Firmware Protection to BIN file and System
• WAN && LAN - XSS exploit
▪ (CVE-2017-14413, CVE-2017-14414, CVE-2017-14415, CVE-2017-14416)
• WAN - Weak Cloud protocol
▪ (CVE-2017-14419, CVE-2017-14420)
• WAN && LAN - Stunnel private keys
▪ (CVE-2017-14422)
• WAN && LAN - Nonce brute forcing for DNS configuration
▪ (CVE-2017-14423)
• Local - Weak files permission and credentials stored in clear text
▪ (CVE-2017-14424, CVE-2017-14425, CVE-2017-14426, CVE-2017-14427, CVE-2017-14428)
• LAN – DoS attack against some daemons
▪ (CVE-2017-14430)
• Security fixes to PHP CGI files to mitigate exposing credentials
• Correct stack overflow vulnerability caused by HNAP

Pondera

Pubblicato firmware DIR-890L Ax 1.21_BETA build 02 20171214.

N.B. Riguardo le date di uscita di questa versione beta c'è un po' di putiferio. È stata pubblicata nella cartella degli avvisi di sicurezza dell'FTP USA in data 20180724 mentre la nota edizione riporta 20180406; tuttavia nella sezione di aggiornamento dell'interfaccia di configurazione figura 20171214.


DIR-890L Firmware Patch Notes

Firmware: FW1.21B02 BETA
Hardware: Ax
Date: April 6, 2018

Note: On Oct. 2, 2017, the Google security team disclosed security flaws in the DNSmasq Linux software package that may lead to remote code execution (RCE) and information leaks.

Problems Resolved:

CVE-2017-14491 – Remote code execution in the DNS subsystem that can be exploited from the other side of the internet against public-facing systems and against stuff on the local network. The previously latest version had a two-byte overflow bug, which could be leveraged, and all prior builds had an unlimited overflow.

CVE-2017-14492 – The second remote code execution flaw works via a heap-based overflow.

CVE-2017-14493 – Google labels this one as trivial to exploit. It's a stack-based buffer overflow vulnerability that enables remote code execution if it's used in conjunction with the flaw below.

CVE-2017-14494 – This is an information leak in DHCP which, when using in conjunction with CVE-2017-14493, lets an attacker bypass the security mechanism ASLR and attempt to run code on a target system.

CVE-2017-14495 – A limited flaw this one, but can be exploited to launch a denial of service attack by exhausting memory. Dnsmasq is only vulnerable, however, if the command line switches --add-mac, --add-cpe-id or --add-subnet are used.

CVE-2017-14496 – Here the DNS code performs invalid boundary checks, allowing a system to be crashed using an integer underflow leading to a huge memcpy() call. Android systems are affected if the attacker is local or tethered directly to the device.

CVE-2017-13704 – A large DNS query can crash the software.

Enhancements:
None

Known Issues:
None

Pondera

Pubblicato firmware DIR-890L Ax 1.21 build 03-01_i3cg 20180312.

N.B. Per le versioni precedenti fino alla 1.11 del 2017 occorre aggiornare prima alla versione di transizione 01_DIR-890L_RevA_MiddleFirmware111b04.bin [20170925] contenuta nel pacchetto.


DIR-890L Rev.A Release Note


Firmware: 1.21b03-01-i3cg
Date: 20180312

Changes:
1. Fix SharePort Plus issue.

----------

Firmware: FW 1.20b01
Release Date: 2017/10/3

Note:
1. The firmware version is advanced to v1.20
2. The firmware v1.20b01 must be upgraded from the transitional version of firmware v1.11b04.

Problems Resolved:
1. Fixed the security issues reported by Embedi.com on Sep 12th ,2017.
Issue 1: Command Injection in http://192.168.0.1/getcfg.php
Issue 2: Stack overflow HNAP in http://192.168.0.1/HNAP1/
Issue 3: Command Injection for "EXEC REBOOT SYSTEM" command for service jcpd.

----------

Firmware: FW 1.11b04
Release Date: 2017/10/3

Note:
1. The firmware v1.11b04 is the transitional version for upgrading to v1.20b01 or later version.

----------

Firmware: 1.11b02_gbii
Date: 2016/11/18

Changes:
1. Fix internet connection issue when WAN type is Dynamic IP and WAN subnet mask is 255.255.255.255

----------

Firmware: 1.11b01_g97i
Date: 2016/09/07

Changes:
1. Fix HNAP Service Stack-Based Buffer Overflow Vulnerability
CWE-121 CVE-2016-6563 VU#677427
http://www.kb.cert.org/vuls/id/677427

----------

Firmware: 1.10b07
Date: 2016/05/24

Enchancement:
1. USB performance enhancement.
2. WiFi stability enhancement.
3. iQoS supporting.
4. VLAN support for internet access.
5. IPv6 6in4 improved.

----------

Firmware: 1.10b02-02_g37i
Date: 2016/03/07

Changes:
1. Fix DHCP Reservation and Parental Corntrol.
Max number of DHCP Reservation rules = 24
Max number of Paretal Corntrol rules = 24

----------

Firmware: 1.10b02
Date: 2016/02/04

Changes:
1. Mix Microsoft Edge issue.

Enchancement:
1. New QoS Setup
2. Add WPS-PBC on/off function. Default is on.
3. Add WPS-PIN lock/unlock function. Lock is off - Unlock is on. Default is off.

----------

Firmware: DIR890A1_FW108b04.bin
Date: 2015/07/14

Changes:
1. Solve the issue that the client number would become zero in client information sometimes.
2. Mobile phone Samsung S6 Internet slow [HQ20150702000007]
3. Fixed Security vulnerability
- UPnP Buffer Overflow
- HTTP Buffer Overflow
For details visit: http://securityadvisories.dlink.com

----------

Firmware: DIR890A1_FW108b03.bin
Date: 2015/07/07

Changes:
1. Apply Broadcom's group key sync patch between driver and hardware. [DUSA Webber's problem]

----------

Firmware: DIR890A1_FW108b02.bin
Date: 2015/07/03

Changes:
1. Using different transaction IDs when doing DNS query.
2. Avoid query same DNS server twice at the same time.

----------

Firmware: DIR890A1_FW108b01.bin
Date: 2015/06/30

Changes:
1. [Bug Fix] UI shows IPv6 WAN type as Auto detection after setting Link-local when WAN ethernet is not connected.
2. Increase the length of PPTP/L2TP server address characters to 32.
3. DHCP change to Unicast by default(Disable Always Broadcast in DHCP server settings) in Network.html.
4. [IP reservation] In some situation, the reserved IP will be given to another client. (Sync from main trunk)
5. Change IPv6 default mode back to auto detection.

----------

Firmware: DIR890A1_FW107b12.bin
Date: 2015/06/26

Changes:
1. Fix that 802.11n (5GHz) devices are still able to connect DIR-890L.The r49935 have solved about 2.4g kind of 802.11n problem before, but the 5g band use the same rule cause to the ac only can still connect with 802.11n.
2. BTD2015041149 [Wizard] After default wizard finished, sometimes the 5G wireless settings are not changed.
a. remove 'Reboot' function.
b. restart WIFI service after SMARTCONNECT service restarted.
c. add timer for SMARTCONNECT service.
3. Restart IPv6 protocol stack in IPV6ENABLE event.To send IPv6 DAD in booting, we do not enable IPv6 protocol stack when starting PHYINF.ETH-X services.
4. For Russia, set IPv6 default mode to Link Local

----------

Firmware: DIR890A1_FW107b11.bin
Date: 2015/06/09

Changes:
1. Reduce expiration time of SCB pending, improve 43602 memory usage.

----------

Firmware: DIR890A1_FW107b10.bin(beta)
Date: 2015/06/05

Changes:
1. Fix some security issue from D-Link DIR-868L security report
2. Fix bug of kernel panic when enable Qos and connect to guest zone
3. fix bug of Parental Control in Home page will disappear
4. Fix SharePort plus not work issue.
5. Resolve few types of video file can't be identified by DLNA.
6. Allow L2TP and PPTP can input domain name into Server IP Address field.

----------

Firmware: DIR890A1_FW107b09.bin
Date: 2015/05/26

Changes:
1. Fix issue that wireless client identify icon doesn't correct.

----------

Firmware: DIR890A1_FW107b08.bin
Date: 2015/05/25

Changes:
1. Fix issue that wireless client identify icon doesn't correct.

----------

Firmware: DIR890A1_FW107b07.bin
Date: 2015/05/22

Changes:
1. Fix command injection by upnp m-search method.
2. Update QOS alert message for DUSA.
3. Update Russian translation.
4. Cannot use ipv6 address to login device web page with https when device using ipv6 static setting.
5. Reserve IP not work. [DEUR20150504000010-North Europe]
6. Fix SharePort plus not work issue.
7. Fix "IP address cannot be the same" message at wrong position.
8. Fix issue the clients disappear and re-appear in 3-5 sesonds on UI.
9. Resolve few types of video file can't be identified by DLNA.

----------

Firmware: DIR890A1_FW107b06.bin
Date: 2015/05/18

Changes:
1. Apply 2 Broadcom's patches to fix 43602 firmware crash issues. [drop-expired-ampdu-rx-pkts.diff], [ignore_amsdu_ptks_with_invalid_scb.diff].
2. Fix wireless client band info at wrong position.
3. [DEUR20150429000011-Central Europe] UI only shows one USB drive when user plugs 2 USB drives.

----------

Firmware: DIR890A1_FW107b05.bin
Date: 2015/05/14

Changes:
1. Fixed: IPv6 firewall still not works when setting IPv6 Firewall Rules to "Turn IPv6 Filtering ON and ALLOW rules listed".
2. Fixed STA band message overlay.

----------

Firmware: DIR890A1_FW107b04.bin (beta firmware)
Date: 2015/05/13

Changes:
1. Add band information of wireless station in web UI Homepage.

----------

Firmware: DIR890A1_FW107b03.bin
Date: 2015/05/12

Changes:
1. Fix IPv6 ingress filtering didn't work. When we modify setting and reboot, the setting lost.

----------

Firmware: DIR890A1_FW107b02.bin
Date: 2015/05/07

Changes:
1. Modify some wifi parameters for 2.4g interference mitigation.
2. Fix driver (43602) crash issues [memory leak and driver trap].
3. Fix schedule not work properly [BTD2015030934].
4. Use buffer length checking memory manipulation in HNAP CGI.
5. Fix IP CAM (DCS-5029) cannot connect with WPA/PSK.
6. Add QOS bandwidth setting help message.
7. Modify QOS bandwidth from Kbps to Mbps.
8. Fix QOS has too low throughput than bandwidth setting.
9. Fix IPv6 firewall issue [DUSA20150506000001].
10.  Rollback mydlink agent to 2.0.18-b25, avoid DLNA cannot list video files.

----------

Firmware: DIR890A1_FW107b01.bin
Date: 2015/04/24

Changes:
1. Change smart connect setting will reboot DUT
2. Fix Host zone Smart connect setting would be modified via Guest zone
3. Avoid system hang (served, xmldb)

----------

Firmware: DIR890A1_FW106b06.bin(beta)
Date: 2015/04/29

Changes:
1. fix the DNS server in LAN can't access internet issue

----------

Firmware: DIR890A1_FW106b04.bin
Date: 2015/04/17

Changes:
2. The connected client number should not count the offline client but only connecting client.
3. 12 noon should not show 00:00 PM but 12:00 PM for D-Link OBU requestment.
4. Solve the cache issue with different firmware version.
a. add missing timestamp for some pages.
b. replace 'ini_ver' with timestamp.
4. Take care SetOperationMode implemented into SetMultipleActions.php to make sure QRS Mobile could work well.
Now DIR-890L only support wireless Router mode and wireless AP mode.
5. Prevent HNAP GetDeviceSettings command injection
  a. Replace strstr function with strcmp function to check HNAP GetDeviceSettings to prevent command injection
  b. Replace sprintf function with snprintf function to prevent the buffer overflow security issue.

----------

Firmware: DIR890A1_FW106b03.bin
Date: 2015/04/10

Changes:
1. [BTD2015031091] [mydlink lite] Skip setup wizard and register mydlink, before DUT reboot the mydlink lite can't access DUT.
2. Fix WOL(wake on lan) not work
3. Set 802.1x to highest priority
4. Solve the issue the captcha login could not work well.
5. a.Extend reciprocal number to prevent sometimes the remote management will fail after saving settings serval times.
b.remote access should be changed to http while https server is disabled.
6. BCM patch to fix the memory leak problem
7. Update 43602 firmware for "BCM patch to fix the memory leak problem".
8. Solve the port forwarding issue
  a. DIR_890_port forwarding rule issue[DUSA20150311000004-Canada]
  b. DIR-890L Doesn't allow port forwarding with a single TCP or UDP port, but it does allow forwarding both![DUSA20150409000001-USA]
9. Work around the issue from D-Link OBU: Change MTU to 1300 and change back to 1492, MTU still 1300 actually after save settings. Reboot will resolve this issue.
10. NVR (beta) agent added in firmware, and no LAB test

----------

Firmware: DIR890A1_FW106b02.bin
Date: 2015/03/25

Changes:
1. Modify client information in Home.html
a. Show the "OFFLINE" style for DHCP reservation client in Home.html if it is not connected to router now.
b. Add the "Add client DHCP reservation card add" to follow the D-Link New GUI design.
c. Add the error check if the DHCP reservation IP is conflict to another current client IP address.
2. Update wireless network interface card firmware. ([devel] We remove some mfg features from 43602 firmware. It should not be in normal firmware.)

----------

Firmware: DIR890A1_FW106b01.bin
Date: 2015/03/20

Changes:
1. Checkout code from SVN server
2. fix when wan type is static, WAN LED turn to amber after unplug and plug in WAN Ethernet cable
3. fix the dhcpd daemon could not be executed if the hostname of DHCP reservation is empty
4. Add the error check if the reserve IP is not belonging to LAN IP
5. Apply BCM patch to fix the low signal power issue

----------

Firmware: DIR890A1_FW105b04.bin
Date: 2015/03/17

Changes:
Base on DIR890A1_FW105b03.bin
1. BTD2015030846  [security] To set Primary SSID security as WEP and Guest security as WPA-PSK, then STA can not connect to Guest SSID.
   SVN update aries/dlink.2013gui/services/SMARTCONNECT.php r52377
2. BTD2015030514 [AP mode] Can't access http://192.168.0.50 after saving any shreaport function
  SVN update aries/progs/htdocs/hnap_ui/SetStorageUsers.php r52815
3. BTD2015030828 [AP+MAC Clone] MAC clone can't work on AP mode(DHCP/Static IP)
  SVN update aries/dlink.2013gui/dir890/htdocs/web/Internet.html r52817
4. BTD2015030839 [Web UI][Guest zone] Can't disable 'Internet Access Only' function.
  SVN update aries/dlink.2013gui/dir890/htdocs/web/GuestZone.html r52824

----------

Firmware: DIR890A1_FW105b03.bin
Date: 2015/03/16

Changes:
Base on DIR890A1_FW105b02.bin
1. SVN update
aries/dlink.2013gui/dir890/htdocs/web/js/ initialJQ.js r52279
2. Solve the bugs in bug tracker
BTD2015030732 [Wizard] Default wizard can't work or cancel

----------

Firmware: DIR890A1_FW105b02.bin
Date: 2015/03/13

Changes:
Base on DIR890A1_FW105b01.bin
1. SVN update
aries/dlink.2013gui/dir890/htdocs/web/GuestZone.html r52764
aries/dlink.2013gui/dir890/htdocs/web/Home.html r52189
aries/dlink.2013gui/dir890/htdocs/web/Wizard.html r52370
aries/dlink.2013gui/dir890/services/LAYOUT.php r52780
aries/progs/htdocs/hnap_ui/SetUSBStorageSettings.php r52246
aries/progs/htdocs/hnap_ui/SetWanSettings.php r52780
aries/progs/htdocs/hnap_ui/SetSmartconnectSettings.php r52779
2. Solve the bugs in bug tracker
BTD2015030293 [WebUI+Guest+Schedule] Enable primary and guest wifi by schedule, guest wifi can work well but it shows disabled on guest zone page
BTD2015030303 [Web UI] Enable guest zone with none security, after save the setting the password fiels will be grayed.
BTD2015030449 [WebUI+Guest] Guest SSID textbox need fool proof(null SSID can be saved but guest wifi won't work)
BTD2015030467 [AP mode+IP setting] Change DUT's IP mode(Static/DHCP) but it need reboot to tack effect.
BTD2015030512 [AP Mode+DHCP] Enable DLNA on AP mode, then DUT's DHCP server will be enabled
BTD2015030514 [AP mode] Can't access http://192.168.0.50 after saving any shreaport function
BTD2015030517 [CN+Wizard] Check internet connectivity will fail when WAN detect DHCP mode
BTD2015030621 [AP+Wireless] Enable guest zone then change to AP mode, primary and guest wifi will become none security
BTD2015030626 [Guest+security] Can't change security from WPA to None security

Pondera

#30
Negli USA è stato notificato la fine del supporto per questo dispositivo mentre risulta sul sito UK fuori disponibilità e sul sito IT in produzione.
In Rete si riesce ancora a trovare in vendita da produttori terzi:

Amazon IT - soluzione 1

Amazon IT - soluzione 2

thedoc62

Salve, ho comprato usato su Ebay il DIR-890L dopo una lunga ricerca/indagine di mercato che mi ha condotto ad escludere per ora i modelli con wifi6. Grazie ai consigli del venditore e ad un minimo di capacita' smanettatoria sono riuscito ad avere accesso ai settaggi ma dopo averlo connesso alla mia Vodafone station VDSL con cavo ethernet vedo sempre la spia di internet del router rossa e infatti non ho accesso internet. Ho provato a settarlo sia da notebook che da smartphone, dal notebook sembra fattibile ma resta la crocetta rossa sul collegamento modem-router; da smartphone NESSUNA app d-link riconosce l'apparecchio. Ho usato SSID e password wireless originali come da bigliettino annesso al router. Non so come risolvere. HELP !
Grab the good times when they come around as bad times can be around every corner

m4ss1

#32
Ciao e benvenuto ;)
I due router hanno classe IP diversa?
Ad esempio Vodafone Station IP 192.168.1.1 e D-Link 192.168.0.1
Stai usando la modalità router?
Se si, hai configurato internet in "Dynamic IP (DHCP)"?

thedoc62

credo abbiano classe diversa
la modalità è router
internet è settato come DHCP
Grab the good times when they come around as bad times can be around every corner

thedoc62

non riesco a trovare alcun dettaglio utile nei forum vodafone, dove si parla solo di modem/router libero alternativo
su altri forum ho letto che si deve disattivare l'opzione smart connect o qualcosa del genere
Grab the good times when they come around as bad times can be around every corner

thedoc62

provato anche a aggiornare il firmware tramite notebook ma fallito miseramente
Grab the good times when they come around as bad times can be around every corner

Pondera

Ehilà benvenuto! :D
Beh... potevi rivolgerti a noi anche prima solo per i consigli di acquisto: ad esempio i modelli DIR-880L & DIR-885L sono un po' più facili da trovare, offrono prestazioni quasi similari ed occupano qualche cm in meno. In ogni caso onore al merito perché sei riuscito ad accaparrarti un'ammiraglia di linea che risultava di difficile reperimento anche quando era in produzione. ;)

Ti consiglio di usare un cavo di rete (LAN Ethernet) per collegarti al router: è più sicuro per l'aggiornamento e poi tanto ti occorre per collegarlo al modem principale. A meno che il tuo PC portatile non abbia la presa necessaria...

Che firmware c'è installato e con quale versione hai provato?
Come hai proceduto per aggiornare?

thedoc62

Firmware 1.20
Il router e' collegato con cavo ethernet alla power station vodafone
Ho aperto la pagina di gestione dal notebook collegato alla rete del router ma ancora senza internet
Grab the good times when they come around as bad times can be around every corner

thedoc62

Ho scaricato i file di aggiornmento dal sito D-Link sul pc fisso e li ho messi su pendrive
Attaccata pendrive al notebook e seguito la procedura a schermo per caricare i file .bin di aggiornamento (sia quello intermedio che quello finale)  ma......"procedura fallita"
Grab the good times when they come around as bad times can be around every corner

thedoc62

Comunque avevo provato anche con cavo ethernet, stessa solfa........bello sapere che per 99 euro ho comprato l'ammiraglia, ma se  non esce neanche dal garage..........☹️
Grab the good times when they come around as bad times can be around every corner

Licenza Creative Commons
Il contenuto dei messaggi del forum è distribuito con
Licenza Creative Commons Attribuzione Non commerciale 4.0
Tutti i marchi registrati citati appartengono ai legittimi proprietari