Menu principale

Access Point wireless 300N - Powerline DHP-W306AV

Aperto da Carciofone, 15 Febbraio 2011, 07:45:47

Carciofone

Segnalati i nuovi firmware disponibili: https://www.dlink-forum.it/index.php?topic=655.msg8410#msg8410

Carciofone

Aggiornamenti:

Utility:
DHP-306AV A1 Utility 2.12 (for WW)
DHP-306AV C1 Utility 2.2 (for MAC for WW)

Firmware:
DHP-W306AV A2 FW v1.03

Changelog:
Project Name: DHP-W306AV
HW version: A1
Customer HW revision: A2
Region/OEM code: None
WLAN Domain: 0x13/ETSI
Channel List:
2.4GHz: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13
Firmware Query URL:
http://wrpd.dlink.com.tw/router/firmware/query.asp?model=DHP-W306AV_Ax_Default
Flash size: 4MB
DRAM size: 32MB
===============================================
Firmware: v1.03 Build: 01
Date: Feb, 2, 2012

Firmware Version: ver1.03b01
Firmware Date: Thu, 2 Feb 2012
KERNEL: 2.6.21, Build: 0082, Date: Thu, 22, Dec, 2011
Application: 2.0, Build: 1007, Date: Mon, 30, Jan, 2012
WLAN Version: 2.3.0.0, Build: 0044, Date: Fri, 16 Sep, 2011
PLC NVM Version: INT6000-MAC-4-4-4405-00-4497-20101201-FINAL-B
PLC PIB Version: DHPW306AVA1_PIB103CEB_WM
checksum: 0x065A524A

Problems Resolved:
1. Fixed when changing wireless security, Disable WPS-PIN Method didn't checked automatically.(test section 7.2.1-7.2.2)

Enhancements:


Firmware: v1.02 Build: 11
Date: Jan, 20, 2012

Firmware Version: ver1.02b11
Firmware Date: Fri, 20 Jan 2012
KERNEL: 2.6.21, Build: 0082, Date: Thu, 22, Dec, 2011
Application: 2.0, Build: 1006, Date: Fri, 20, Jan, 2012
WLAN Version: 2.3.0.0, Build: 0044, Date: Fri, 16 Sep, 2011
PLC NVM Version: INT6000-MAC-4-4-4405-00-4497-20101201-FINAL-B
PLC PIB Version: DHPW306AVA1_PIB103CEB_WM
checksum: 0x06598C81

Problems Resolved:
1. Support Disable WPS PIN.

Enhancements:


Firmware: v1.02 Build: 10
Date: Sep, 16, 2011

Firmware Version: ver1.02b10
Firmware Date: Fri, 16 Sep 2011
KERNEL: 2.6.21, Build: 0080, Date: Fri, 19, Aug, 2011
Application: 2.0, Build: 1001, Date: Tue, 6, Sep, 2011
WLAN Version: 2.3.0.0, Build: 0044, Date: Fri, 16 Sep, 2011
PLC NVM Version: INT6000-MAC-4-4-4405-00-4497-20101201-FINAL-B
PLC PIB Version: DHPW306AVA1_PIB103NA_WM
checksum: 0x065AC6AF

Problems Resolved:
1. fixed when setting the channel width to Auto 20/40MHz, DUT would still kept the channel width in HT40 even though there were some legacy AP around.

Enhancements:



Firmware: v1.02 Build: 09
Date: Aug, 22, 2011

Firmware Version: ver1.02b09
Firmware Date: Mon, 22 Aug 2011
KERNEL: 2.6.21, Build: 0080, Date: Fri, 19, Aug, 2011
Application: 2.0, Build: 0996, Date: Mon, 22, Aug, 2011
WLAN Version: 2.3.0.0, Build: 0043, Date: Wed, 29 Jun, 2011
PLC NVM Version: INT6000-MAC-4-4-4405-00-4497-20101201-FINAL-B
PLC PIB Version: DHPW306AVA1_PIB103NA_WM
checksum: 0x065A6BD3

Problems Resolved:
1. Change the behavior of checking network name
a. check network name is blank or not when switching from public to private
b. check network name is blank or not when the network name is existing
c. not to check network name is blank or not when the network name has been blank already
2.  reduced the time to write mac address to PLC pib file from forty                      seconds to twenty seconds in MP
Enhancements:





Firmware: v1.02 Build: 08
Date: Aug, 9, 2011

Firmware Version: ver1.02b08
Firmware Date: Tue, 9 Aug 2011
KERNEL: 2.6.21, Build: 0079, Date: Thu, 7, Jul, 2011
Application: 2.0, Build: 0995, Date: Tue, 9, Aug, 2011
WLAN Version: 2.3.0.0, Build: 0043, Date: Wed, 29 Jun, 2011
PLC NVM Version: INT6000-MAC-4-4-4405-00-4497-20101201-FINAL-B
PLC PIB Version: DHPW306AVA1_PIB103CEB_WM
CheckSum: 0x065B5219

Problems Resolved:
1. supported enable or disable the power saving mode on PLC Settings page
2. changed the behavior of exiting the power saving mode. DUT should exit the power saving mode immediately, when users plugged in a cable to the Ethernet port or connected to DUT by wireless.
Enhancements:




Firmware: v1.02 Build: 07
Date: Jul, 7, 2011

Firmware Version: ver1.02b07
Firmware Date: Thu, 7 Jul 2011
KERNEL: 2.6.21, Build: 0078, Date: Wed, 29, Jun, 2011
Application: 2.0, Build: 0993, Date: Thu, 7, Jul, 2011
WLAN Version: 2.3.0.0, Build: 0043, Date: Wed, 29 Jun, 2011
PLC NVM Version: INT6000-MAC-4-4-4405-00-4497-20101201-FINAL-B
PLC PIB Version: DHPW306AVA1_PIB103CEB_WM
CheckSum: 0x065B20F5

Problems Resolved:
1. Disabled the plc sync led when DUT was in the power saving mode
2. fixed unable to add bookmark on IE9
3. fixed unable to display simple Chinese language information on chklst.txt

Enhancements:




Firmware: v1.02 Build: 06
Date: Jun, 29, 2011

Firmware Version: ver1.02b06
Firmware Date: Wed, 29 Jun 2011
KERNEL: 2.6.21, Build: 0078, Date: Wed, 29, Jun, 2011
Application: 2.0, Build: 0992, Date: Wed, 29, Jun, 2011
WLAN Version: 2.3.0.0, Build: 0043, Date: Wed, 29 Jun, 2011
PLC NVM Version: INT6000-MAC-4-4-4405-00-4497-20101201-FINAL-B
PLC PIB Version: DHPW306AVA1_PIB102CEB_WM
CheckSum: 0x065B0ECC

Problems Resolved:
1. Fixed displaying incorrect network key on the Summary page by using Wireless Setup Wizard
2. Fixed when DUT's lan connection is dynamic ip and it didn't get any IP address from a dhcp server, it displayed the incorrect connection and IP address information on Status->Device Info page
3. Fixed when DUT set the cipher type to TKIP and AES, the 802.11n rate would be limited in 54Mbps
4. Fixed D-Link Consumer AP WPS-PBC didn't work
5. Fixed unable to save the schedule name which contained special characters on Wireless page
6. Fixed unable to display the schedule name which contained special characters on the schedule list
7. delay 300 seconds to make DUT entering the power saving mode

Enhancements:



Firmware: v1.02 Build: 05
Date: May, 27, 2011

Firmware Version: ver1.02b05
Firmware Date: Fri, 27 May 2011
KERNEL: 2.6.21, Build: 0076, Date: Tue, 17, May, 2011
Application: 2.0, Build: 0988, Date: Fri, 27, May, 2011
WLAN Version: 2.3.0.0, Build: 0042, Date: Fri, 1 Apr, 2011
PLC NVM Version: INT6000-MAC-4-4-4405-00-4497-20101201-FINAL-B
PLC PIB Version: DHPW306AVA1_PIB102CEB_WM
CheckSum: 0x065B282D

Problems Resolved:
1. Fixed LAN IPv6 address always displayed "None"
2. Fixed after checking online now for latest firmware, GUI didn't display the result.
3. Changed the year of Copyright to 2011
4. Supported VLAN tag
5. Supported when the current PLC firmware version is different than the PLC firmware version in the current firmware, DUT should upgrade or downgrade the PLC firmware
6. Support D-Link Consumer AP Web UI Specification V1.05
7. Support D-Link Consumer AP Setup Wizard Specification v1.03
8. Support the new behavior of the power led when doing PLC group or ungroup function.
a. When push and hold the PLC encryption button over 10 seconds, the power led will be turned to the orange color for 5 seconds
b. Push and hold the PLC encryption button for 3 seconds to pair with another PLC device. After pairing successfully, the power led will be turned to the orange color for 5 seconds.
9. Support the new behavior of the PLC connection led
a. The PLC connection led should be turned on when DUT is connecting to another PLC device.
10. Fixed after doing WPS PBC in unconfigured mode, the Pre-Shared Key will be set to 64 Hex characters.
11. Fixed after upgrading the PLC's pib file, the nmk key will be restore to default

Enhancements:




Firmware: v1.02 Build: 04
Date: Jan, 11, 2011

Firmware Version: ver1.02b04
Firmware Date: Tue, 11 Jan 2011
KERNEL: 2.6.21, Build: 0066, Date: Fri, 17, Dec, 2010
Application: 2.0, Build: 0951, Date: Tue, 11, Jan, 2011
WLAN Version: 2.3.0.0, Build: 0040, Date: Fri, 5 Nov, 2010
PLC NVM Version: INT6000-MAC-4-4-4405-00-4497-20101201-FINAL-B
PLC PIB Version: DHPW306AVA1_PIB102CEB_WM
CheckSum: 0x06590B9F

Problems Resolved:
1. fixed displaying the incorrect field name of Wireless Domain in chklst.txt
2. fixed displaying the incorrect field name of Firmware Query in version.txt
3. fixed PLC Qos didn't work properly
4. supported D-Link Consumer AP WPS-PBC Implementation Specification v1.00
5. supported updating PLC's pib file according to the wireless domain in a MP command
6. supported displaying new PLC information(PLC MAC, PLC NVM Version, PLC PIB Version, and PLC Password) in chklst.txt and version.txt
7. updated PLC firmware to 4.4.0.00 and PLC Pib file to 1.02

Enhancements:



Firmware: v1.02 Build: 03
Date: Sep, 10, 2010

Firmware Version: ver1.02b03
Firmware Date: Fri, 10 Sep 2010
KERNEL: 2.6.21, Build: 0064, Date: Fri, 27, Aug, 2010
Application: 2.0, Build: 0927, Date: Fri, 10, Sep, 2010
WLAN Version: 2.3.0.0, Build: 0038, Date: Fri, 20 Aug, 2010
PLC Version: INT6000_4.1.2.00, Date: 2009-12-09
PIB Version: DHPW306AVA1_PIB101CEB_WM
CheckSum: 0x06592713

Problems Resolved:
1. Supported D-Link AP IPv6 Specification v1.01R (without IPv6 Diagnosis Tool)
2. Supported 24-system and overnight setting on the Schedule page
3. Supported DUT is able to update the PLC's pib file after upgrading firmware
4. Supported System Check
5. Supported language pack information in chklst.txt
6. Removed the Log out menu
7. Changed the upgrading firmware time from 160 seconds to 190 seconds
8. Fixed when PLC was in the power saving mode, the encryption led would be turned on
9. Fixed when DUT booted up without any Ethernet cable and then users plugged into a Ethernet cable, DUT won't enter the power saving mode

Enhancements:



Firmware: v1.02 Build: 02
Date: Sep, 1, 2010

Firmware Version: ver1.02b02
Firmware Date: Wed, 1 Sep 2010
KERNEL: 2.6.21, Build: 0064, Date: Fri, 27, Aug, 2010
Application: 2.0, Build: 0918, Date: Fri, 27, Aug, 2010
WLAN Version: 2.3.0.0, Build: 0038, Date: Fri, 20 Aug, 2010
PLC Version: INT6000_4.1.2.00, Date: 2009-12-09
CheckSum: 0x06591AD6

Problems Resolved:
1. modified the hints and help descriptions for new MAC Address Filter GUI

Enhancements:



Firmware: v1.02 Build: 01
Date: Aug, 27, 2010

Firmware Version: ver1.02b01
Firmware Date: Fri, 27 Aug 2010
KERNEL: 2.6.21, Build: 0064, Date: Fri, 27, Aug, 2010
Application: 2.0, Build: 0918, Date: Fri, 27, Aug, 2010
WLAN Version: 2.3.0.0, Build: 0038, Date: Fri, 20 Aug, 2010
PLC Version: INT6000_4.1.2.00, Date: 2009-12-09
CheckSum: 0x065A19B8

Problems Resolved:
1. Support lock wireless security on the WI-FI Protected Setup page
2. Support new Mac Address Filter GUI
3. Support PLC power saving mode
4. Support the default device name plus the last four bytes of PLC Mac Address not Lan Mac Address
5. Fixed when disabling WPS, users still could choose WPS on the Wireless Setup Wizard
6. Fixed unable to disable wireless
7. Fixed when selecting the wireless mode as 802.11n only, users still could choose WEP or TKIP
8. fixed when the WPS is enabled, users still could choose the Authentication as Shared Key
9. Fixed incorrect message for checking the range of Start Time and End Time on Schedule page
10. Fixed the admin password could be entered non-ascii characters
11. Fixed two words(the and local) were combined to one word on the System page
12. Fixed after changing the Administrator's password, DUT did not reboot
13. Fixed two extra minus symbols in the description of Pre-Shared Key on the Wireless Settings page
14. Fixed after users set the WPA mode to "WPA Only" or "WPA2 Only", GUI still showed "Auto (WPA or WPA2)"
15. Fixed X-Box 360 was unable to connect DUT in WPA2-PSK/AES
16. Fixed NDS and NDSL were unable to connect DUT

Enhancements:



Firmware: v1.01 Build: 04
Date: Aug, 9, 2010

Firmware Version: ver1.01b04
Firmware Date: Mon, 9 Aug 2010
KERNEL: 2.6.21, Build: 0061, Date: Fri, 30, Jul, 2010
Application: 2.0, Build: 0902, Date: Mon, 9, Aug, 2010
WLAN Version: 2.3.0.0, Build: 0036, Date: Fri, 30 Jul, 2010
PLC Version: INT6000_4.1.2.00, Date: 2009-12-09
CheckSum: 0x065B5C5A

Problems Resolved:
17. support Windows 7 Logo

Enhancements:


Firmware: v1.01 Build: 03
Date: Aug, 5, 2010

Firmware Version: ver1.01b03
Firmware Date: Thu, 5 Jul 2010
KERNEL: 2.6.21, Build: 0061, Date: Fri, 30, Jul, 2010
Application: 2.0, Build: 0900, Date: Thu, 5, Aug, 2010
WLAN Version: 2.3.0.0, Build: 0036, Date: Fri, 30 Jul, 2010
PLC Version: INT6000 4.1.2.00, Date: 2009-12-09
CheckSum: 0x0658879A

Problems Resolved:
18. fixed wireless client was unable to get IP address through DUT
19. fixed incorrect product name "Powerline AV Wireless N Extender" for WCN
20. modified the PLC version format. Use underscore instead of space between INT6400 and version number. The format should be INT6400_x.x.xx
21. added PIB version in chklst.txt

Enhancements:



Firmware: v1.01 Build: 02
Hardware: A1
Date: Jul, 29, 2010

Firmware Version: ver1.01b02
Firmware Date: Thu, 29 Jul 2010
KERNEL: 2.6.21, Build: 0060, Date: Thu, 29, Jul, 2010
Application: 2.0, Build: 0896, Date: Mon, 26, Jul, 2010
WLAN Version: 2.3.0.0, Build: 0035, Date: Thu, 29 Jul, 2010
PLC Version: INT6000 4.1.2.00, Date: 2009-12-09
CheckSum: 0x06A3C500


Problems Resolved:
1. support D-Link SOHO AP Setup Wizard Specification v1.02
2. fixed unable to save a schedule rule
3. fixed when SSID contained specific characters, SSID would display incorrect on the Device Info page
4. fixed unable to save a Qos mac address without splinter(:) on the PLC Settings page
5. added "Add Wireless Station" section on the WI-FI Protected Setup page
6. added the status of Wi-Fi Protected Setup on the Device Info page
7. modified the string "Current Router Time" to "Current Time" on the Time page
8. modified the string "All of your IPv6 Internet and network connection details are displayed on this page" to "All of your IPv6 network connection details are displayed on this page."
9. modified the product name to "Powerline AV Wireless N Extender" for WCN

Enhancements:



Firmware: v1.01 Build: 01
Hardware: A1
Date: Jul, 26, 2010

Firmware Version: ver1.01b01
Firmware Date: Mon, 26 Jul 2010
KERNEL: 2.6.21, Build: 0058, Date: Mon, 26, Jul, 2010
Application: 2.0, Build: 0895, Date: Mon, 26, Jul, 2010
WLAN Version: 2.3.0.0, Build: 0034, Date: Mon, 26 Jul, 2010
PLC Version: INT6000 4.1.2.00, Date: 2009-12-09
CheckSum: 0x067A647B

Problems Resolved:
1. support D-Link SOHO AP UI modification v1.02
2. support D-Link SOHO AP Setup Wizard Specification v1.01
3. support a smac command to generate wps_default_pin.txt for MP
4. fixed a Mac address filter rule could be saved when users entered an incomplete mac address
5. fixed incorrect spelling on Help  PLC Settings  Mac address. The correct word should be You not ou
6. fixed PLC Qos not working
7. fixed DUT was unable to send pause frame when using Smartbits to send long packets
8. fixed unable to save a schedule when start hour was 12 AM or PM

Enhancements:



Firmware: v1.00 Build: 14
Hardware: A1
Date: Jun, 29, 2010

Firmware Version: ver1.00b14
Firmware Date: Thu, 29 Jun 2010
KERNEL: 2.6.21, Build: 0056, Date: Tue, 29, Jun, 2010
Application: 2.0, Build: 0880, Date: Mon, 28, Jun, 2010
WLAN Version: 2.3.0.0, Build: 0033, Date: Fri, 25 Jun, 2010
PLC Version: INT6000 4.1.2.00, Date: 2009-12-09
CheckSum: 0x0654EEC5

Problems Resolved:
1. update PLC piv file for fixing QOS (DSCP)

Enhancements:



Firmware: v1.00 Build: 13
Hardware: A1
Date: Jun, 24, 2010

Firmware Version: ver1.00b13
Firmware Date: Thu, 24 Jun 2010
KERNEL: 2.6.21, Build: 0055, Date: Wed, 23, Jun, 2010
Application: 2.0, Build: 0879, Date: Thu, 24, Jun, 2010
WLAN Version: 2.3.0.0, Build: 0032, Date: Fri, 04 Jun, 2010
PLC Version: INT6000 4.1.2.00, Date: 2009-12-09
CheckSum: 0x06596CC2

Problems Resolved:
1. fixed missing SOAPActions GetPLCBtnStatus, GetPLCPairedStatus in GetDeviceSettings xml file.
2. fixed after running the HNAP tool, users are unable to open GUI by firefox.

Enhancements:



Firmware: v1.00 Build: 12
Hardware: A1
Date: Jun, 23, 2010

Firmware Version: ver1.00b12
Firmware Date: Wed, 23 Jun 2010
KERNEL: 2.6.21, Build: 0054, Date: Tue, 01, Jun, 2010
Application: 2.0, Build: 0877, Date: Wed, 23, Jun, 2010
WLAN Version: 2.3.0.0, Build: 0032, Date: Fri, 04 Jun, 2010
PLC Version: INT6000 4.1.2.00, Date: 2009-12-09
CheckSum: 0x06559F53

Problems Resolved:
1. Fixed HNAP function SetWLanRadioSecurity type WPAORWPA2-RADIUS error.

Enhancements:





Firmware: v1.00 Build: 11
Hardware: A1
Date: Jun, 23, 2010

Firmware Version: ver1.00b11
Firmware Date: Wed, 23 Jun 2010
KERNEL: 2.6.21, Build: 0054, Date: Tue, 01, Jun, 2010
Application: 2.0, Build: 0876, Date: Tue, 22, Jun, 2010
WLAN Version: 2.3.0.0, Build: 0032, Date: Fri, 04 Jun, 2010
PLC Version: INT6000 4.1.2.00, Date: 2009-12-09
CheckSum: 0x0658A3E1


Problems Resolved:
1. Add check authorization when user name is null need return 401 error, for cameo-HNAP tool authorization test.
2. HNAP function GetWLanRadioSecurity and SetWLanRadioSecurity, add two type WPAORWPA2-PSK and WPAORWPA2-RADIUS , for cameo-HNAP tool test.

Enhancements:




Firmware: v1.00 Build: 10
Hardware: A1
Date: Jun, 21, 2010

Firmware Version: ver1.00b10
Firmware Date: Mon, 21 Jun 2010
KERNEL: 2.6.21, Build: 0054, Date: Tue, 01, Jun, 2010
Application: 2.0, Build: 0873, Date: Mon, 21, Jun, 2010
WLAN Version: 2.3.0.0, Build: 0032, Date: Fri, 04 Jun, 2010
PLC Version: INT6000 4.1.2.00, Date: 2009-12-09
CheckSum: 0x0658BB0A

Problems Resolved:
1. Add BtnStatus in the GetPLCBtnStatus HNAP command and add PairedStatus in the GetPLCPairedStatus HNAP command
2. Fixed using smac tool to change lan mac only, users need to input wireless domain and hardware id.

Enhancements:



Firmware: v1.00 Build: 09
Hardware: A1
Date: Jun, 10, 2010

Firmware Version: ver1.00b09
Firmware Date: Thu, 10 Jun 2010
KERNEL: 2.6.21, Build: 0054, Date: Tue, 01, Jun, 2010
Application: 2.0, Build: 0868, Date: Tue, 08, Jun, 2010
WLAN Version: 2.3.0.0, Build: 0032, Date: Fri, 04 Jun, 2010
PLC Version: INT6000 4.1.2.00, Date: 2009-12-09
CheckSum: 0x0657E168

Problems Resolved:
1. fixed missing "s" in "D-Link System"
2. change the year of copyright from 2009 to 2010

Enhancements:


Firmware: v1.00 Build: 08
Hardware: A1
Date: Jun, 04, 2010

Firmware Version: ver1.00b08
Firmware Date: Fri, 04 Jun 2010
KERNEL: 2.6.21, Build: 0054, Date: Tue, 01, Jun, 2010
Application: 2.0, Build: 0866, Date: Fri, 04, Jun, 2010
WLAN Version: 2.3.0.0, Build: 0032, Date: Fri, 04 Jun, 2010
PLC Version: INT6000 4.1.2.00, Date: 2009-12-09
CheckSum: 0x06584DE9

Problems Resolved:
1. fixed when users click the "Scan" button on the PLC Setting page, the scan list
will still remain the first PLC device
2. fixed when users add a PLC member manually, sometimes the mac address of the
PLC member is empty.
3. fixed unable to edit a member when the member list has more then one PLC device


Enhancements:



Firmware: v1.00 Build: 07
Hardware: A1
Date: Jun, 03, 2010

Firmware Version: ver1.00b07
Firmware Date: Thu, 03 Jun 2010
KERNEL: 2.6.21, Build: 0054, Date: Tue, 01, Jun, 2010
Application: 2.0, Build: 0865, Date: Wed, 02, Jun, 2010
WLAN Version: 2.3.0.0, Build: 0031, Date: Wed, 19 May, 2010
PLC Version: INT6000 4.1.2.00, Date: 2009-12-09
CheckSum: 0x06574F8B

Problems Resolved:
1. fixed unable to show PLC member list on the PLC Settings page

Enhancements:


Firmware: v1.00 Build: 06
Hardware: A1
Date: Jun, 02, 2010

Firmware Version: ver1.00b06
Firmware Date: Wed, 02 Jun 2010
KERNEL: 2.6.21, Build: 0054, Date: Tue, 01, Jun, 2010
Application: 2.0, Build: 0865, Date: Wed, 02, Jun, 2010
WLAN Version: 2.3.0.0, Build: 0031, Date: Wed, 19 May, 2010
PLC Version: INT6000 4.1.2.00, Date: 2009-12-09
CheckSum: 0x0654D913

Problems Resolved:
1. Device management support using default IP address when connect type is static.
2. Fix NetBIOS didn't return the correct IP address in the same subnet mask with PC address.
3. Support authorization access version.txt. Now it must login first.
4. Push PLC encryption button and open the powerline page. If PLC encryption action is not finished, GUI will redirect to index.htm now.
5. fixed users can input non-ASCII characters for WEP Keys, now we will get a warning message and cannot save it.
step1. In AP mode, wireless setup. Select security mode to WEP.
step2. Select key format to Hex, and enter WEP key "1111111111"
step3. Change key format to ASCII, the WEP key will become non-ASCII characters
step4. Now push save setting button, we will get a warning message.
6. Modify the condition codes for the DCC command (TYPE_PWLINE_IS_PAIRED), update restore default to 1 after running the DCC utility successfully.
7. fix GUI WPS PIN is different with factory production label.

Enhancements:



DHP-W306AV Firmware Release Note
Firmware: v1.00 Build: 05
Hardware: A1
Date: May, 28, 2010

Firmware Version: ver1.00b05
Firmware Date: Fri, 28 May 2010
KERNEL: 2.6.21, Build: 0052, Date: Thu, 20, May, 2010
Application: 2.0, Build: 0861, Date: Fri, 28, May, 2010
WLAN Version: 2.3.0.0, Build: 0031, Date: Wed, 19 May, 2010
PLC Version: INT6000 4.1.2.00, Date: 2009-12-09
CheckSum: 0x06577EE7

Problems Resolved:
1. Fixed HNAP FAIL, Test Device 10.2.8130.1,
tool setting by default setting, not include 1.2 function (SSDP Discovery, NAS Info, NAS share), and need sleep 3 seconds.
2. Add IPv6 link local IP support.
3. IPv6 llmnr support hostname http://dlinkap http://dlinkapWXYZ (WXYZ: 4 digits suffix of MAC Address).
4. fixed unable to upgrade PLC firmware while DUT is static ip
5. support special characters for PLC's network name.
6. support two new DCC commands(TYPE_PWLINE_GET_BTN_STATUS, TYPE_PWLINE_IS_PAIRED) for DHP-W306AV.
7. support adding remote PLC device without entering the mac address.
8. Fixed use GUI upgrade FW failed.
9. change the time for upgrading firmware from 150 seconds to 160 seconds
10. fixed display incorrect the latest firmware and language information when GUI is timeout

Enhancements:


 
DHP-W306AV Firmware Release Note
Firmware: v1.00 Build: 04
Hardware: A1
Date: May, 21, 2010

Firmware Version: ver1.00b04
Firmware Date: Fri, 21 May 2010
KERNEL: 2.6.21, Build: 0052, Date: Thu, 20, May, 2010
Application: 2.0, Build: 0855, Date: Fri, 21, May, 2010
WLAN Version: 2.3.0.0, Build: 0031, Date: Wed, 19 May, 2010
PLC Version: INT6000 4.1.2.00, Date: 2009-12-09
CheckSum: 0x05CB9BDB

Problems Resolved:
1. D-Link Reset and Reconvery specification
2. D-Link Device Management specification (AP, IPv4):
a. Default IP address 192.168.0.50 always existed.
b. Netbios support hostname http://dlinkapWXYZ (WXYZ: 4 digits suffix of MAC Address).
3. Fixed displaying incorrect PLC firmware version in chklst.txt and version.txt.
4. support return PLC's mac address in the response packet for DCC discovery packet.
(This feature is for the new scenario of DCC utility only.)
5. Support xml agent.
6. Fixed HNAP FAIL, Test Device 10.2.8130.1,
tool setting by default setting, not include 1.2 function (SSDP Discovery, NAS Info, NAS share), and need sleep 3 seconds.
7. fix Firmware and language pack information word wrong : Check online now for Latest firmware and language pack version



Enhancements:



DHP-W306AV Firmware Release Note
Firmware: v1.00 Build: 03
Hardware: A1
Date: May, 07, 2010

Firmware Version: ver1.00b03
Firmware Date: Fri, 07 May 2010
KERNEL: 2.6.21, Build: 0049, Date: Fri, 07, May, 2010
Application: 2.0, Build: 0846, Date: Wed, 5, May, 2010
WLAN Version: 2.3.0.0, Build: 0030, Date: Wed, 28 Apr, 2010
PLC Version: INT6000 4.1.00, Date: 2009-12-09
CheckSum: 0x05CCA50F

Problems Resolved:
1. change login user name to scroll bar
2. fix GUI wrong words "DAP-1350" to "DHP-W306AV"
3. fix PLC GUI may hold on or show null page when save setting but no change anything
4. fix sometime web page of PLC setting will display duplicate member list
5. fix WPS (WIFI PROTECTED SETUP) Wizard can't accept some PIN code like "06297480"
6. fix input wrong format MAC like 002401efd884, web page pop-up waring message not clearly
7. fix Firmware and Language Upgrade GUI not match for spec 1.071
8. change Powerline network name  check rule to reject special chars, because intellon utility not support it.
9. support firmware and language pack online query (spec 1.071)
10. support HNAP


Enhancements:



DHP-W306AV Firmware Release Note
Firmware: v1.00 Build: 02
Hardware: A1
Date: Apr, 08, 2010

Firmware Version: ver1.00b02
Firmware Date: Thu, 08 Apr 2010
KERNEL: 2.6.21, Build: 0045, Date: Fri, 26, Mar, 2010
Application: 2.0, Build: 0834, Date: Thu, 08, Apr, 2010
WLAN Version: 2.3.0.0, Build: 0029, Date: Fri, 26 Mar, 2010
PLC Version: INT6000 4.1.00, Date: 2009-12-09
CheckSum: 0x05CA79E1

Problems Resolved:
1. Support QoS mapping
2. Support neighbor network
3. language pack GUI support spec v1.08
4. Support Zero configuration
5. implement PLC fimware v4.1.00


Enhancements:



DHP-W306AV Firmware Release Note
Firmware: v1.00 Build: 01
Hardware: A1
Date: Mar, 15, 2010

Firmware Version: ver1.00b01
Firmware Date: Mon, 15 Mar 2010
KERNEL: 2.6.21, Build: 0042, Date: Thu, 11, Mar, 2010
Application: 2.0, Build: 0818, Date: Mon, 15, Mar, 2010
WLAN Version: 2.3.0.0, Build: 0027, Date: Thu, 11 Mar, 2010
PLC Version: INT6000 4.0.01, Date: 2009-05-19
CheckSum: 0x05C973C7


Problems Resolved:
1. change model name from DIG-1220 to DHP-W306AV
2. changed "Name" to "Device Name", "DAK Password" to "Password"
3. combined Tx and Rx rate to Link Rate and show the highest Tx or Rx rate
4. changed the default Network name from D-Link to HomePlugAV
5. fixed unable to save radius server's port number
6. when the current NMK doesn't match the network name, change the radio buttons
7. to private and set the Network Name field to blank
8. fixed when the first radius server doesn't exist, 802.1x won't work
9. fixed missing left menu on Setup -> Logout page
10. fixed missing page when users click the connect button on the WPS wizard
11. removed to display WAN mac address in chklst.txt and version.txt
12. changed the PLC firmware back to 4.0.01

Enhancements:



Firmware: v1.00EU Build: 03
Hardware: A1
Date: Mar, 02, 2010

Firmware Version: ver1.00EUb03
Firmware Date: Tue, 02 Mar 2010
KERNEL: 2.6.21, Build: 0040, Date: Wed, 24, Feb, 2010
Application: 2.0, Build: 0809, Date: Tue, 02, Mar, 2010
WLAN Version: 2.2.0.0, Build: 0024, Date: Wed, 24 Feb, 2010
PLC Version: INT6000 4.1.00, Date: 2009-12-09
CheckSum: 0x05CA3A34

Problems Resolved:
1. fixed java script error on Help -> Menu page
2. fixed no PLC Settings Help descriptions
3. fixed display WEP key incorrectly after changing WEP Key length and Key format
4. fixed incorrect firmware date
5. fixed users can input floating point numbers on Advanced -> Advanced Wireless page
6. fixed missing WEP Key description in Wizard
7. changed the behavior of restore to default. Before v1.00EU build:03, when users press the restore to default button, DUT will restore slave PLC devices in the PLC member list to factory default. Right now DUT will only restore itself to default
8. support after upgrading a new firmware, DUT will upgrade its PLC firmware if there is a new PLC firmware in the new firmware.
9. display PLC information on version.txt and chklst.txt
10. support DCC


Enhancements:



Firmware: v1.00EU Build: 02
Hardware: A1
Date: Fed, 12, 2010

Firmware Version: ver1.00EUb02
Firmware Date: Fri, 12 Fed 2010
KERNEL: 2.6.21, Build: 0039, Date: Wed, 3, Feb, 2010
Application: 2.0, Build: 0802, Date: Fri, 12, Feb, 2010
WLAN Version: 2.3.0.0, Build: 0023, Date: Wed, 3 Feb, 2010
CheckSum: 0x05C9721D

Problems Resolved:
1. support Qos rules

Enhancements:
PLC firmware upgrade is not ready.




Firmware: v1.00EU Build: 01
Hardware: A1
Date: Fed, 10, 2010

Firmware Version: ver1.00EUb01
Firmware Date: Wed, 10 Fed 2010
KERNEL: 2.6.21, Build: 0039, Date: Wed, 3, Feb, 2010
Application: 2.0, Build: 0800, Date: Wed, 10, Feb, 2010
WLAN Version: 2.3.0.0, Build: 0023, Date: Wed, 3 Feb, 2010
CheckSum: 0x05C84C39

Problems Resolved:
1. First release.

Enhancements:
PLC firmware upgrade and QoS is not ready.

Do71

Salve, ho acquistato un kit dlink powerline dhp-w306av e dhp-307av, ma volevo aggiungere un'altro dhp-w306av, però non capisco quale tasto premere o se esegue la configurazione automaticamente.
Grazie dell'aiuto.

Aggiungo configurazione:
Connecting a Powerline AV device to an existing Powerline network

To add a DHP-W306AV if you already have an existing network with 2 or more Powerline devices:

1. Press the Eny button on the DHP-W306AV for more than 10 seconds to make sure it is not connected to any other Powerline network.

2. Press the Eny button of any device already in your Powerline network for 1 to 3 seconds. The Eny LED should start to blink.

3. Press the Eny button on the DHP-W306AV for 1 to 3 seconds. The Power LED should blink.

4. Wait for the devices to reboot (all LEDs will turn off and on). When the Powerline AV LEDs on all devices are steadily lit, the DHP-W306AV will be connected to the existing network.

Carciofone

E' tutto scritto nel secondo post:
resetta la DHP-W306AV premendo il tasto di reset per 15 sec. Attendi che il reset sia completato per 60 secondi. Disconnetti dalla rete elettrica tutte le PLC tranne una di quelle già in uso. A questo punto premi il tasto di configurazione della sicurezza di questo dispositivo per non più di 3 sec. Il LED Power comincerà a lampeggiare.
Attendi ancora 30 sec e premi per non più di 3 sec il tasto di configurazione di sicurezza del secondo adattatore da configurare o aggiungere alla rete preesistente.
Dopo qualche secondo i led dei due adattatori si accenderanno fissi e saranno sincronizzati.

fuzzybear

Ciao, ho un W306AV (A2) che fa le bizze, ossia il led blu è sempre lampeggiante, la luce della casina non si accende mai nemmeno all'atto dell'accesione iniziale.

In pratica il PLC è come se non ci fosse.

Ho aggiornato il firmware alla 1.03 e tutto è andato a buon fine. Il wifi funziona perfettamente.

Quando provo ad andare nel menù PLC dopo pochi secondi compare una popup che dice che il PCL è occupato, riprovare più tardi.

L'utility di verifica identifica correttamente il dispositivo e il suo MAC, ma invece di visualizzare la versione del PCL ha la scritta "Bootloader".

Ovviamente ho seguito la procedura di reset e tenendo premuto il tasto evy non succede nulla.

Consigli?

Grazie

a

trikyz

ciao a tutti ragazzi..l'altro giorno  ho comprato il powerline dlink w307av ma sto avendo difficoltà a configurare il setup per far funzionare la rete wireless....
Ho notato che il mio problema lo riscontrano molti utenti in quanto riusciamo a far andare la connessione via cavo ma via wireless non riusciamo ad aquisire un indirizzo IP.

Ho trovato anche una potenziale risposta:  
1) Perchè si naviga su internet normalmente dal cavo ethernet mentre con la connessione wireless no?
Perchè la plc wireless si comporta come un vero e proprio AP wireless che considera la linea elettrica come una porta WAN ordinaria. Di conseguenza il pc collegato alla porta ethernet è come se fosse collegato ad una normalissima plc NON wireless e comunica direttamente con l'altra plc applicata al router. L'AP va invece configurato se ha un range di IP del suo DHCP diverso da quello del router principale. Siccome la plc opera con i 192.168.0.x (lei è 192.168.0.50) e generalmente i router ADSL sono 192.168.1.1 ecco che non si naviga FINCHé la PLC non verrà cambiata di range IP mettendola in quello del router. La guida è alla configurazione è nel primo post.

Ora premetto che il problema l'ho capito ma non riesco a capire come configurare il router per cambiare il range ip alla PLC. al primo post non vedo nessuna configurazione utile per il mio caso!
qualcuno riesce ad aiutarmi? grazie infinite

tsm9et2

Avendo una casa su due piani ho acquistato il kit DHP P307V, che ho collegato al modem router alice gate 2 plus. Tutto funziona alla meraviglia.
Successivamente ho voluto estendere la rete attraverso un DHP W306AV. Appena installato è stato riconosciuto ed ho subito navigato alla grande tramite ethernet.

I problemi sono nati con la connessione Wireless.
Infatti cercando di connertemi con il mio samsung galaxy S2, noto che la potenza del segnale D-LINK è al massimo, ma il terminale rimane quasi sempre in "..Ottenimento indirizzo IP in corso.....tentativo connessione..... fuori intervallo"
Solo alcune volte, avvicinandomi molto (pochi centimentri al DHP W306AV) si connette e navigo.
 Specifico che il W306AV ha firmware V.2 che da la possibilità di impostare DHCP dinamico.
In questo modo ho:
Alice 192.168.1.1.
307AV n°1 192.168.1.8
307AV n°2 192.168.1.78
W306AV 192.168.1.168

Qualche esperto può dirmi dove sbaglio?

Carciofone

Il DHCP di queste unità si riferisce all'Ip che prendono loro dal router, non che hanno funzioni di routing esse stesse, sicchè controlla di non aver commesso un errore di logica di rete, ossia assegna all'unità un ip fisso nel range operativo DHCP del tuo router, indicando come gateway il router stesso e DNS quelli del provider oppure dei classici 8.8.4.4 e 208.67,220.220

Goldorak

Citazione di: C@rciofone il 27 Febbraio 2011, 09:23:58Firmware per Access Point Power Line DHP-W306AV

Firmware generici:
Firmware DHP W306AV A1 v1.00B14: DOWNLOAD
Firmware DHP W306AV A1 v1.01B04: DOWNLOAD
Firmware DHP W306AV A1 v1.02B09: DOWNLOAD
Firmware DHP W306AV A1 v1.03B01: DOWNLOAD

Firmware BQ:
Attenzione: una volta effettuato il caricamento di questo tipo di firmware non è più possibile effettuare il passaggio a firmware generici!
Firmware DHP-W306AV A1 1.02BQB02: DOWNLOAD
Firmware DHP-W306AV A1 1.03BQB01: DOWNLOAD

Ciao, volio sappere quella é la diferecia entro il firmware generico é il firmware BQ?
Gazié mille

Goldorak

Hi, no one knows the difference? I'm afraid doing a mistake if I put the wrong firmware...
Thanks for informations.

Carciofone

Il firmware serie BQ è nato specificamente per un operatore israeliano. Non è dato sapere quali siano le particolarità specifiche, ma funziona correttamente anche in Italia ed è distribuito anche in Inghilterra come aggiornamento. Probabilmente in Israele non si usano le frequenze radio wireless dei paesi ETSI europei. Tuttavia esiste la versione WW per tutti con la stessa numerazione, quindi è opportuno usare quella.
Una volta aggiornato a firmware della serie BQ non sembra al momento possibile tornare a firmware della serie WW o EU.

Goldorak

Citazione di: C@rciofone il 20 Settembre 2012, 14:56:04Il firmware serie BQ è nato specificamente per un operatore israeliano. Non è dato sapere quali siano le particolarità specifiche, ma funziona correttamente anche in Italia ed è distribuito anche in Inghilterra come aggiornamento. Probabilmente in Israele non si usano le frequenze radio wireless dei paesi ETSI europei. Tuttavia esiste la versione WW per tutti con la stessa numerazione, quindi è opportuno usare quella.
Una volta aggiornato a firmware della serie BQ non sembra al momento possibile tornare a firmware della serie WW o EU.

Grazié per la risponda. Dlink francia usa anche il firmware BQ ( ftp://ftp.dlink.fr/DHP/DHP-W306AV/Firmware/ )
Vado a aggiornare il mio powerline con questo e vedro se il funzionamento é migliore. ( firmware installata 1.02 e wifi difficile da conectare )
Ciao

Pietro1065

Buon pomeriggio
ho acquistato un DHP W 307AV con l intenzione di aumentare intesità segnale wifi in stanze della casa ove il segnale è debole per poter utilizzare IPAD o simili.
Il router si trova nella stanza A insieme al PC. Qui dovrò collegare il primo adattatore al router tramite cavo ethernet. Nella stanza B, che è quella dove mi manca il segnale, allaccio il secondo adattatore ma le istruzioni dicono di collegarlo via cavo ethernet al PC che però nel mio caso si trova nella stanza A ???!!!   A cosa altro posso collegarlo ? Puo andar bene ingresso cavo ethernet di decoder sky per raggiungere il mio scopo ??
Grazie per suggerimenti

Carciofone

Questa plc wireless ha anche a disposizione una porta ethernet. Il collegamento al pc può servire per la prima configurazione accedendo alla pagina web del dispositivo. Ma dopo può operare via wireless in completa autonomia. Quindi per configurarla la puoi connettere la prima volta al pc nell'altra stanza e poi la sposti.

ciccio8

Salve, scusate ma io non riesco proprio a farli funzionare! Oggi ho acquistato dlink dhp-w307av per estendere la mia rete...Ho collegato come dice la guida quello ethernet al modem e quello wi-fi in un altra stanza, sono entrato nel portale e ho tolto la richiesta della password. Quando stacco e collego quello wifi a qualsiasi altra presa elettrica perde totalmente la configurazione e il simbolo con la casa non lo rileva più...a quel punto devo resettare dal programma che installo sul pc per farlo tornare alla situazione iniziale..ma cosa sbaglio? cosa non configuro?dove trovo la versione del firmware già installata per fare un eventuale aggiornamento?se avessi saputo che sarebbe stato così difficile configurarli non li avrei comprati..sono totalmente demoralizzato!

Carciofone

Segui i passaggi del terzo post per sincronizzare i due dispositivi. Solo dopo ha senso entrare nella pagina di configurazione dell'AP.

ciccio8

salve, sapete dirmi per quale motivo ogni volta che cambio presa per collegarlo in un altra stanza, si perde la configurazione e devo rifare tutto da capo?in oltre perchè nell'iphone la rete wifi devo sempre ricollegarla manualmente e non resta configurata?devo sempre scegliere la rete e reinserire la password che ho settato...non essendo molto bravo nell argomento non so se sono stato chiaro..ma grazie anticipatamente!

Citazione di: C@rciofone il 15 Novembre 2012, 21:43:49Segui i passaggi del terzo post per sincronizzare i due dispositivi. Solo dopo ha senso entrare nella pagina di configurazione dell'AP.

Grazie per la tua celere risposta, ma nella guida di cui mi parli la sincronizzazione viene successivamente alla connessione al portale! e poi non capisco il procedimento per sincronizzarli..non è chiarissimo!

cepenzoio

Ciao a tutti.
Qual'è l'ultimo firmware disponibile per il DHP W306AV versione hardware A2? L' 1.03 postato sopra ? e per il DHP 306AV versione hardware C1? il mio monta firmware 5.00. Grazie per la disponibilità.

Carciofone

Attenzione che in questa discussione si parla della plc con AP wireless integrato, la W306AV, non della 306AV normale. Comunque il firmware 5 mi pare sia l'unico per la versione hardware C1.

cepenzoio

Ok allora ho aggiornato solo il W306 AV  v. A2 alla versione 1.03 postata sopra.

Licenza Creative Commons
Il contenuto dei messaggi del forum è distribuito con
Licenza Creative Commons Attribuzione Non commerciale 4.0
Tutti i marchi registrati citati appartengono ai legittimi proprietari